Great review! Thanks to you I'm buying this for my s40! Glad to see someone talking about the s40!
@dingusmcslow1908
3 жыл бұрын
I went a similar route with the 3" do88 inlet pipe and a high flow filter in the stock airbox as I hear is the better option as it's enclosed to reduce heat from the air. I still hear the small flutter and cbv equivalent of a blowoff sound. Throttle response is much better! I'm looking into their tune now, I'd love to see a review of that or other tune recommendations!
@moosedroppings
3 жыл бұрын
Great idea. We’ll do a review of the elevate tune in the next few days. Stay tuned.
@kylemontano228
3 жыл бұрын
This video was so helpful man thank you
@MtnMig
Жыл бұрын
This was very helpful. Thanks!
@moosedroppings
Жыл бұрын
Sure thing.
@sirhcmi3
3 жыл бұрын
Great quick-take. I didn’t know about the intake sounds or the horsepower and torque claims so thanks. (...but you should clean that intake manifold :)
@moosedroppings
3 жыл бұрын
Glad you liked it. No point in cleaning the intake mani, the elevate inlet going in soon! 😜
@daremoyt7216
2 жыл бұрын
I have a c30 and all i have to do for the oil filter is take out tha first pipe, its still alot easier with the elavate air intake tho
@thomasjj1976
3 жыл бұрын
You absolutely do not need to remove the box in order to change the oil filter. You remove the snorkel, but the air box doesn't come out.
@moosedroppings
3 жыл бұрын
This is true, but access is greatly improved with it gone. Good call Thomas
@user-bz1ds5ug7p
9 ай бұрын
Do you have to add a tune with a cold air intake or you can run the stock set up? Without beeing to lean or to rich?
@moosedroppings
9 ай бұрын
Bone stock add on is no problem at all, you will hear and feel the difference immediately.
@lenghtofpull
11 ай бұрын
Dont forget your v50 use this as well
@moosedroppings
11 ай бұрын
Correct. As well as c70s.
@Dux96
Жыл бұрын
Installed this today and it looks and sounds as promised. But I noticed the ECU was hot to touch after a 15 minute drive, at which point it occurred to me too late that placement of the ECU on the air box was probably to keep it within temp tolerances. Now I'm worried that my ECU will get fried from overheating. Heat fins only go so far. How have you handled keeping the ECU ventilated?
@moosedroppings
Жыл бұрын
Southern California 110 summers. Installed for years and years. No issues. Also no report on the forums anyone has ever had an issue. Valid concern but I can’t really speak to it. I think you’ll be fine.
@RedEyes_95
3 жыл бұрын
Trying to decide between K&N Typhoon setup or Elevate, so Thanks for the vid - also dope grill! where can that be purchased?
@moosedroppings
3 жыл бұрын
I did the k&n initially and then switched. The ecu bracket by elevate is far better. The grill is eBay by dubstop $100
@kylemontano228
3 жыл бұрын
@@moosedroppings what was Volvo thinking with that ecu placement lol
@johnblake443
2 жыл бұрын
IT looks like you have tight clearance between the intake pipe and the strut brace. Does it hit at all?
@moosedroppings
2 жыл бұрын
Good eye. The factory pipe is bolted to the head. So with this pipe I did in Italy get some vibration touching. Put a rubber grommet for now. We will be wrapping the pipes in heat tape and I am guessing that will alleviate that issue
@trungle9923
2 жыл бұрын
You do not need to remove the air box to change the oil filter.
@lenghtofpull
11 ай бұрын
You're right but the box being removed makes it a ton easier to work on the car. To completely remove the air box you have to remove the motor mount, lift the engine a bit. Just easier to cut it out and replace it with a cai
Пікірлер: 24