Very nice Joe. It's amazing how much interesting information you share with us. Thanks
@jjfo1980
4 жыл бұрын
This is the exact reason I watch the youtube world. @Joe you are a true legend and cant get enough of watching your videos. Such a shame your so far away from Australia as this is a workshop I would be in awe in. :)
@sxsboy2253
4 жыл бұрын
My Grizzly tool post doesn’t have a drilled & tapped hole in it. BUT it will by the end of the day. Thank You Joe for another great idea. You know 40years ago I took a full year’s worth of 6 hour, Saturday machine shop classes @ LH Bates Vol.Tech. In Tacoma and can honestly say that I have learned more in your little 15 - 20 minute video clips than I ever could have imagined at Bates. That instructor was great at hanging a coffee cup on one hand while telling war stories from the past but you my friend are a wizard. 🤓 Another Joe
@joepie221
4 жыл бұрын
Thank you for the compliment.
@gmcevoy
4 жыл бұрын
Nice! Thank you for the metric conversions. They really help.
@joepie221
4 жыл бұрын
It gives some scale.
@dannyl2598
4 жыл бұрын
Thanks Joe. You are one of the smartest people I know.
@joepie221
4 жыл бұрын
Thanks for that.
@mrmichael555
4 жыл бұрын
Unloosen, huh? Well, irregardless 😁😁, I still really enjoy your videos.
@muellermaxwell
4 жыл бұрын
Great video thanks for sharing
@christurley391
4 жыл бұрын
Thanks again Joe.
@jcs6347
4 жыл бұрын
Thanks Joe, It makes sense, and I will use it! Thanks again!
@peteramor7373
4 жыл бұрын
So simple yet so effective Joe Another one for the book Pete UK
@tunafish3216
4 жыл бұрын
Very cool tooling.
@astro1218
4 жыл бұрын
Great tip Joe
@frankjames4573
4 жыл бұрын
Simply brill...
@sideshowbob2421
4 жыл бұрын
Cool man! Great tip! My lathe is very different but there's other ways around it ;)
@joepie221
4 жыл бұрын
There's always a way around it.
@charruauno386
4 жыл бұрын
Thanks for sharing. Good as always. When you were in baltimore did you know Raloid or AAI. Have a nice day
@milantrcka121
4 жыл бұрын
I like untighten also!
@Steve_Just_Steve
4 жыл бұрын
Untighten makes more sense when unscrewing, he says unloosen when unscrewing. Funny enough, they both mean to "to make loose" according to Merriam-Webster
Clamp a piece of welding rod parallel to the stop rod, going down the center of the work and catch them as they fall off, then you don't even have to take your hands off the controls...
@dercebe
4 жыл бұрын
That is just what I thought when I saw this, make the rod bend down a bit so the finished parts collect clear off the work.
@BobbyCreech
4 жыл бұрын
@@dercebe was thinking the same thing.
@bobolander
4 жыл бұрын
9.5 seconds later. nice!!!
@joepie221
4 жыл бұрын
Hey Bo. Thanks for stopping by.
@tom7601
4 жыл бұрын
When you "unloosen" something, does that mean you're tightening it? Disclaimer: I say unloosen regularly and have done so for at least 50 years. :-)
@joepie221
4 жыл бұрын
I use that word all the time. No plan to stop.
@mousemade1
4 жыл бұрын
Another great tip Joe, thanks. I have used this for many years and like some of the other commenters here I run a second rod in the setup [when the sizes permit] . I set it so that when the jig is touching to set the tool position the wire is close to the tool side of the bore hole and as parting progresses the wire moves across the borehole not interfering with anything. I use stiff, flexible wire [a piece of coat hanger] and arrange it to enter the hole by 2 or 3 times the washer/shim thickness and to slope down away from the job. This way machine vibrations cause the cut pieces to shuffle away from the working area and the overall speed is increased because you now don't have to manually remove the parts at each cut. Keep up the excellent work!
@CustomCreations-co-uk
4 жыл бұрын
I had to make a few shims earlier, wasn't very happy with the results so will be remaking them tomorrow with this method... thanks again joe
@fsecofficial
3 жыл бұрын
I just wanna thank Joe and everyone else like him who takes the time to teach us dummies how to keep our fingers. I really appreciate Joe, Tony, Pete and anyone I missed. You guys are a national treasure. Thanks Joe!
@jlippencott1
4 жыл бұрын
Add another (sliding) rod forward of the stop rod that can be entered into the part bore while parting to catch each ring as it drops off. You can set it up to catch a multitude of rings without worrying about losing them in the chip pan. Just push it into the bore before parting off and slide it back out of the way for the next. A small "hook" on the rod end will keep the parts from sliding off the rod. No need to catch it manually and keeps both hands free.
@chrismate2805
4 жыл бұрын
I like this idea.
@lauriegraham5924
4 жыл бұрын
Slick as snot Joe. I will use that one for sure.
@AlphaBobFloridaOverlord
4 жыл бұрын
I'm impressed that you don't need to turn the machine un-on between parts!
@jamesciampi6392
4 жыл бұрын
You are the most informative poster on KZitem,and a true Genius, wouldn’t miss any of your videos.Thank you so much for taking your valuable time to make these videos.
@joepie221
4 жыл бұрын
Thank you for taking the time to watch and comment. I appreciate it.
@EDesigns_FL
4 жыл бұрын
I've just been using that hole on the QCTP for a handle. Thank you for showing us another use:-)
@snowiethetoolguy
4 жыл бұрын
Great Video as always...I do the same... But add another finger to catch the part up the middle. Then you don't need to use the Allen Key for the part catcher
@richardfrisbie6069
4 жыл бұрын
I love it when you use the term unloosen, because, as you say, it's bound to piss somebody off!
@2011zurich
4 жыл бұрын
"Unloosen" is a word my mother would have used. Keep using it!
@Tapajara
4 жыл бұрын
That angle parting was a cool trick. Thanks a bunch.
@joepie221
4 жыл бұрын
Small detail, but big time saver.
@CraigsWorkshop
4 жыл бұрын
PS: Thanks for including metric versions of your measurements.
@RaysGarage
4 жыл бұрын
Excellent time saver Joe! 🤙
@joepie221
4 жыл бұрын
Ray, Thanks for stopping by.
@ericrichards5862
4 жыл бұрын
Great tip Joe, one of the best I've seen. Thanks
@joepie221
4 жыл бұрын
Thanks. It works very well for repeatable big quantity jobs.
@metalshopwithtroy5755
4 жыл бұрын
Thats another great video joe. Love the production method, slicker than bat shit. Really can expediate multiple parts quickly.
@joepie221
4 жыл бұрын
This works very well when blanking off parts for future operations too.
@metalshopwithtroy5755
4 жыл бұрын
@@joepie221 hey i know you hear it often but thank you Joe for just doing a great job with quick replies too. My mentor Cheers troy
@k5at
4 жыл бұрын
Joe, Thanks for the tip, This will work well when I'm parting off cast iron rings for my engines.
@anthonycash4609
4 жыл бұрын
The teacher I wish I had in school. Thanks again Joe. I've said I before the education departments in this world today need more people like you.
@joepie221
4 жыл бұрын
Thank you. I enjoy teaching.
@Smallathe
4 жыл бұрын
Awesome! Simple, brilliant, elegant... Great tip!!! what else can we ask for???
@the4thj
4 жыл бұрын
Excellent unloosening!
@RRINTHESHOP
4 жыл бұрын
Great tip Joe. Could you add a second rod to just catch the part at the same time, set in about half the thickness of the part?
@tedchambers4381
4 жыл бұрын
every video is a gift that if honest .that we all get something out of . :)
@joepie221
4 жыл бұрын
Thanks. thats the intent.
@TomokosEnterprize
2 ай бұрын
S W E E T. In school a 1/2 thou was a mistake, LOL. There is no stop for shop made tooling. This shows that in spades my friend. Thanks a bunch teach.
@ScottTurnerformeindustrious
4 жыл бұрын
Great tips there!
@GlockG34
4 жыл бұрын
I cringed when you said "unloosen everything", then laughed my *ss off when you said why you loved saying it. Great videos, thanks Joe, I've learned a ton from you & really appreciate it.
@joepie221
4 жыл бұрын
Stay tuned. You'll hear it some more.
@joshuaklingensmith7843
4 жыл бұрын
Classic moment
@offroad6309
4 жыл бұрын
You never disappoint. As somebody starting out and trying to learn all I can, I truly appreciate you sharing your knowledge. Thank you
@joepie221
4 жыл бұрын
Glad to help
@samrodian919
Жыл бұрын
Yep, Joe is one of the great machinists worldwide. Thanks Joe Pie!
@roygrafton6322
4 жыл бұрын
Don't forget to untighten it when you are finished.😁
@danvandertorre6349
4 жыл бұрын
always good info on your channel very useful thanks Joe
@thisoldtoad1658
4 жыл бұрын
Add a wire hook to the same bracket to catch the work! Great tip nonetheless.
@mikenixon9164
4 жыл бұрын
Thanks for the tip !
@JoseSilveira-newhandleforYT
4 жыл бұрын
Nice setup. You could add a length of piano wire, attached parallel to the stop rod, but going slightly inside the drilled hole to collect cut pieces automatically (it will not interfere with the operations because it will flex).
@mikeklink4626
4 жыл бұрын
Wish you made this video about 6 months ago lol
@ShawnDickens
4 жыл бұрын
Just got home and saying hi to my dog before going to make spacers and find this video. Perfect timing, if I don't spend all my time setting this up for next time. Thanks.
@Preso58
4 жыл бұрын
Great tip. Now, have I got a tapped hole in my Chinese import BXA tool post? Just ran down to the shed and there's no hole. Cheapskates! Maybe it's not hardened.....
@JG-kv4oi
4 жыл бұрын
My Phase II does...Ha! 😁 lol
@umahunter
4 жыл бұрын
Nice we were just talking about this hole the other day as I was trying to find its actual purpose what I've got is it's either for accessories or they use it during finishing making the tool posts either way very nice
@robbincarlson
4 жыл бұрын
My wife used to unloosen stuff. She also unthawed the gravy.
@johnbodmer5645
4 жыл бұрын
Great idea Joe!!
@amundsen575
4 жыл бұрын
Great tip, I cut some thick washers today, I could have used this method. my phase II post does not have a hole, will have to put one in it
@jamessherrill3454
4 жыл бұрын
Great tip, thank you! Enjoy watching your videos Joe.
@ironhead65
4 жыл бұрын
Lies! 9.5 seconds later, not 10 seconds!
@48ford8n
3 ай бұрын
Nothing wrong with “unlosen”! Educated people know it doesn’t mean “tighten”
@glennfelpel9785
4 жыл бұрын
That tip will be just as good for only two or three parts as well. Well worth the few minutes to set up. Thank you.
@mordimustafa1275
4 жыл бұрын
Well i was buying a insert tool holder when i got the upload notification
@Amaysing79
4 жыл бұрын
Thanks again Joe. This was great I will need to use this setup.
@harryhopkins7798
4 жыл бұрын
Thank you! Learning something new with each video.
@seabeckon
4 жыл бұрын
Thankyou seems simple but some valuable tips.
@joepie221
4 жыл бұрын
Its always simple after you see it.
@TABE-O
3 жыл бұрын
Mate love your Tips Joe!! Keep em coming
@SandBoxJohn
4 жыл бұрын
Do not stop using the word unlosen™.
@artmckay6704
4 жыл бұрын
Another one slammed right out of the park! Thanks again for sharing :)
@joepie221
4 жыл бұрын
Born of necessity. Works great.
@mabmachine
4 жыл бұрын
Great, now I have another thing on my to "do list" LOL. Seriously this is so simple but awesome.
@warrenjones744
4 жыл бұрын
Worth the price of admission and then some Joe. Nice tip
@jimmilne19
4 жыл бұрын
Off to the shop to make one! Thanks for another very useful video.
@cpcoark
4 жыл бұрын
Joe, I would say this one was a Grand Slam. :-)
@jimad
4 жыл бұрын
Genius! Will create this tomorrow!
@richardcooke9948
2 ай бұрын
Stupidly simple setup. Thanks.
@RosaStringWorks
4 жыл бұрын
Very nice job.
@dustinmasters9239
4 жыл бұрын
9.5 seconds later. HA!
@1800JimmyG
4 жыл бұрын
I need to figure out why i broke a parting tool twice today :(
@BurtonsAttic
4 жыл бұрын
I just got home from a 350 mile drive in which I designed a normal clamp on the bed flip stop in my head. Need it for an up coming project. Get home and this video was on my page. I'm using a multifix, so no hole in the post but I do have two bolt holes on the back side of the saddle for a follow rest. You just changed my thought process, Thanks Joe!
@fredjones7307
4 жыл бұрын
I like the un-loosening bit. Reminds me of a guy I worked with who used to bend things straight...
@joepie221
4 жыл бұрын
That word always gets comments. I like it.
@abilenediscdyeguy385
4 жыл бұрын
Thats awesome
@ronkennedy213
4 жыл бұрын
The force is strong in this one.
@MaturePatriot
4 жыл бұрын
Yes....Yes it is!
@joshuaklingensmith7843
4 жыл бұрын
Joe every time I click one of your videos I always learn something new. Thanks for your time I know posting on KZitem/video production is tough and a lot more than just machining.
@joepie221
4 жыл бұрын
It really is. thanks for realizing that.
@RANDALLOLOGY
4 жыл бұрын
Now that is really cool and useful. I got some scrap cold roll laying around, so I'm gonna make me one. I got to make 8. 2 in dia. X 1/4 in thick stainless washers with a 3/4 in hole for a bank vault door. This will make my task easy. THANKS JOE 👍👍👍
@pat8ck
4 жыл бұрын
If you set up on the inside face could you not use the same tool to catch the parts?
@joepie221
4 жыл бұрын
I imagine that would work provided the parts had a hole.
@buildmotion1426
4 жыл бұрын
Nice lesson. Thanks for sharing.
@HolzMichel
4 жыл бұрын
say Joe, have you peeking at my content on this subject ?? ;-) you answered some of my dilemma in SuGar nuts part 2. one problem i was having with the parting was the material (stainless) was pushing away from the tool and creating a a slight conical shape. since the washers had to be uniform thickness, i ended up making a plate that superglued the washers into and then ground the to matching thickness on the surface grinder. any advice on keeping the material from going conical?
@JonDingle
4 жыл бұрын
I like that tip, very interesting stuff and as an unqualified quick-fix-or-weld-it type person I can use tips like that. Cheers!
@pettere8429
28 күн бұрын
Would it be possible to grind a tiny concave into the parting blade? I have heard other YT machinists not wanting to do the slight angle as it risks deflecting the blade on small lathes.
@joepie221
23 күн бұрын
Top or front ?
@pettere8429
23 күн бұрын
@@joepie221 front so you will present a very shallow u-profile to the work.
@rickolson9011
4 жыл бұрын
Excellent!!
@ngauge22
4 жыл бұрын
Now THAT is slick.
@spankranchgarage
4 жыл бұрын
Very slick. How about some welding rod in the tail stock to catch all the parts and keep on partying
@michaelslee4336
4 жыл бұрын
That’s my favourite trick.
@joepie221
4 жыл бұрын
I use wood dowels from time to time.
@ChrisB257
4 жыл бұрын
Brilliant idea Joe - thank you.
@meocats
4 жыл бұрын
there's a faster way to do this. You part to depth before you drill, then when you drill they all hang on the drill. Actually this is the most common way too since large rings get trepanned not drilled inside, saving a core.
@billchiasson2019
4 жыл бұрын
That's a great idea! Thanks for that!
@Shop-Tech
4 жыл бұрын
What if there isn't a hole? This way is much better.
@somebodyelse6673
4 жыл бұрын
When the drill is just about through the washer, does it tear the washer off leaving the last bit of 'top hat' burr on the part?
@meocats
4 жыл бұрын
@@billchiasson2019 even then, there's a better alternative. Advance the stock in the chuck. Would you want that much stickout if you had to make 20 washer? And if you were making like only 10 washers and stickout wasn't a problem, would you go to the trouble to alocate spec for this device in your box, finding it, calibrating it. Drilling your toolpost to hold it (at least make it magnetic, but then it will acumulate swarf)?
@meocats
4 жыл бұрын
If you drill after parting, you can also hold the stock with a center while you part, allowing you more stickout
@rustandoil
4 жыл бұрын
Nice trick.... 👍👍
@CraigsWorkshop
4 жыл бұрын
Very clever Joe - I have needed this tool myself, and didn't come up with a good way to do it. I'll be borrowing this idea! My home made vise stop also looks very much like your parting off stop, so I'm just going to use my vise stop when the need arises. Double win! :-) Cheers, Craig
@joepie221
4 жыл бұрын
Perfect.
@DeArmondTool
4 жыл бұрын
Great info Joe!!! I cut alot of Delrin slices just like that and this will sure help. I refuse to run the Delrin in my CNC lathe as I don't want the swarf in my coolant. Neat trick!!! THANK YOU!
@CockatoobirdmanBill
4 жыл бұрын
Joe: At 77 years young I have learned more in the three years i have been watching your vids than i ever did working in shops I hope that I have time lift to use all of them Lol........ I think you need to put your tips and tricks into a book, I know it will sell. Thank you again. Be well and be safe....Bill
@DCFusor
4 жыл бұрын
When I was a beginner, one of the most important things I had to learn was to take the time to make the tool or jig that made making the thing I wanted to make easy. I was so into going straight for it - I sure wasted a lot of time and material.
@bstanga
4 жыл бұрын
I don't comment very often, but in this case these are some great ideas, especially adjusting the grind.
@joepie221
4 жыл бұрын
Thanks. You don't have to deal with burrs you don't make, right?
@DudleyToolwright
4 жыл бұрын
That's a really cool trick. Does it kill you that the parting tool thickness is more than the parts? I have considered making some 1/2 hardened extra thick washers and will modify my clone toolpost to have the same threaded hole. You are an awesome teacher Joe. Thanks.
Пікірлер: 374