Finally a simple and easy to follow video, so glad I found this
@TheCarKeyMan
3 жыл бұрын
Thanks Gemma, good news that you got your key working again :)
@MMMitre2009
4 жыл бұрын
Just used this on my sons car and it works!! Having been quoted over £150 for a replacement key I’m over the moon - many thanks!
@TheCarKeyMan
4 жыл бұрын
Hi Jason, I know, such a simple little trick to be honest. Glad it worked for you and thanks for watching :)
@sweetandsoursushi
10 ай бұрын
Hi, thanks I have a 2010 Ford Fiesta and one of the key did not operate central locking, changed to new battery and still did kot work. I used the key that worked and tried exaclty on what was demonstrated in the video🎉 and worked. Thanks a lot
@TheCarKeyMan
10 ай бұрын
That's great news, really pleased it helped and thanks for the feedback :)
@grahampenson6683
6 жыл бұрын
Great video from Steve. Initially this did not work, but after I switched the car one-off 8 times I got the beep. This was a 2009 Fiesta with the more oblong 3 button key. Well done, thanks Steve.
@TheCarKeyMan
6 жыл бұрын
Thanks Graham, really good news that you managed to do it yourself :)
@cliffjohnson2040
2 жыл бұрын
Mate my key hasnt workdd for 2 months! I watched your video and is working perfectly! Thankyou so so soooo much!!!
@TheCarKeyMan
2 жыл бұрын
Great stuff Cliff, really pleased it helped you :)
@nickpackham
3 жыл бұрын
Thank you, my 2010 key stopped working recently. I’ve just followed your advice and it worked perfectly. Thank you so much 👍
@TheCarKeyMan
3 жыл бұрын
You're welcome Nick, thanks for the feedback and glad you got it working again :)
@Anton008
3 жыл бұрын
I own Fiesta 2007. Currently I have 2 working key (one is fob). Can I program +2 additional unlocking key? Four times from 1-2, first remote unlock and then add +2 more keys? Does that work or I need 1 by 1 or it is not possible to add so many? I bought 2 keys from Aliexpress (8$ with ID63 40bit, hope transponder is ok)
@TheCarKeyMan
3 жыл бұрын
Hi, yes you can do this, it will only programme the buttons. The chip inside the key needs to be coded using a computer
@robbocop33r12
Жыл бұрын
I just cut and programmed a key for a guy with a 2004 fiesta.He just had a key with a transponder in it with no central locking. I programmed in a new 3 button remote with an original oval shaped remote head Ford key. All was well,i got him to test it,his boot lock worked as well. Then he says when he got home remote didn't work!!I noticed when he was starting his car it turned over very slowly like it wasn't going to start,would these keys go out of sync with a weak car battery?
@icb_91_
4 жыл бұрын
I have central locking on my fiesta. I have 2 keys. None of them has buttons. I put the key inside and I lock unlock the car. Can I do this if I buy a remote?
@TheCarKeyMan
4 жыл бұрын
Hi, it depends if your car has a central locking module remote fitted. Check with your local Ford dealer
@youtuberjh5705
Жыл бұрын
Hi mate just wondering- I’ve got my aftermarket key fob working for everything except starting the car (it’s cut correctly) I was just wondering how I can get it to start the engine it’s a 2007 ford fiesta I would really appreciate any advice
@TheCarKeyMan
Жыл бұрын
Hi, inside the new key is a transponder chip. It needs to be matched to teh car with diagnostics, it can't be done manually
@jonathanmoss5328
Жыл бұрын
Do you need special equipment to programme the chip?
@TheCarKeyMan
Жыл бұрын
Hi Jonathan, yes it needs to be programmed with a laptop. Either a local car key man, a garage or the Ford dealer
@bluesvmta
2 жыл бұрын
Hello car key man! Did what you say and first and second keys are now acting as a remote should. However the second key (the one programmed) cannot start the car, which can be done with the original one. Any idea, solution, please. Thanks
@TheCarKeyMan
2 жыл бұрын
Hi, there is a chip inside the key. It needs to be coded in with a computer
@bushytushy9719
2 жыл бұрын
Do i follow all the steps the same if ita jus one key? Cuz both my keys dont work and i chaged the battery too
@TheCarKeyMan
2 жыл бұрын
Hi, yes you ca do the same if you only have the one key :)
@prime553
3 жыл бұрын
Hi would another cars work if I just use the buttons with the chip and my owns car barrel and battery tray on a Ford fiesta mark 5? Thanks
@TheCarKeyMan
3 жыл бұрын
Hi, if you take a key from another car, you can programme the buttons easily using this video. You'll need to get the chip coded to to the car, normally done using diagnostics
@prime553
3 жыл бұрын
@@TheCarKeyMan thanks for the reply so basically I could use my own key to start it and the other key just for opening /closing the locking system
@mohanlalmistry5435
2 жыл бұрын
Hello Steve , I have just bought a Ford Fiesta 2007 and the central locking works on all the doors except passenger side door which stays locked. I then had a manual key and tried this and guess what all the locks opened including the passenger door , this was fine for about 8 times or so and now the manual key opens all the locks except the passenger side door. Any clues or suggestions of what it might be , I really don’t want to spend money on things which I do not need until I get a proper diagnosis, any help would be appreciated . Also my rear driver passenger doors whirs a lot after a new door lock assembly should this be like this. Thanks for any help
@TheCarKeyMan
2 жыл бұрын
Hello Mohanlal, the system is quite simple. When you press the button on the key, or turn the key in the door lock, it sends a signal to a computer on the car. This coputer then tell each door to lock or unlock. It sems that your passenger door is misbehaving and probably needs looking at. That's my guess, but it really needs a look from someone locally
@electricgamer122
2 жыл бұрын
Hi Car Key Man, I’m not sure if you’d respond but I’ll try my luck anyway, I have a 2007 fiesta got a key that works electronically that came with the car and just a normal Ford spare key but wondered could I buy a newer Ford key fob and code that using this method to the car for locking and unlocked even though the key is a newer model than the car?
@TheCarKeyMan
2 жыл бұрын
Hello, it really depends on which key you are thinking of getting
@JonD_44
3 жыл бұрын
Is there a way to do this if you've lost your main key fob? Currently only have the spare key that doesn't have a fob/buttons.
@TheCarKeyMan
3 жыл бұрын
Hi JD, this video shows you how to code in the buttons after changing the key battery. You can do this with a new key no problem, however, inside the new key is a chip that will need coding in with diagnostic software
@garethjones97
3 жыл бұрын
I have a Ford Fiesta 2006. I only have one key. It’s fully working, however, I’m now getting the “Key Fob Battery Low” warning on the dash. If I replace the battery and it requires reprogramming, can I do this with just the one key?
@TheCarKeyMan
3 жыл бұрын
Hi Gareth, yes it will work with just one key
@benyew1290
6 жыл бұрын
Thanks for the video. I followed your steps and it WORKED!! Just one other problem.. The key can lock and unlock from the new remote, BUT...it does not detect the "key" meaning, the car cannot start because of the "immobiliser"? any solution to that please? :)
@TheCarKeyMan
6 жыл бұрын
Hello Ben, what make and model is it please?
@harrisfitness8792
3 жыл бұрын
I am getting the first beep but when pressing key button it doesn’t work ? Any thing else I could try? Thanks
@TheCarKeyMan
3 жыл бұрын
It's good that you're getting the first beep. If you don't get the second one of two things is happening. On the later models, sometimes the car doesn't beep when you press the key, but it still works the central locking after you have cycled the ignition. Or, there isn't a signal coming out of the key for the car to hear. Have you had your key checked to see if its transmitting ?
@clareshirley9076
8 ай бұрын
My 2005 ford fiesta key fob stopped working, Ive tried using this method to recalibrate the key, i do the inital 4 times and get the beep but when I press the key theres no second beep, I bought another key to try and nothing. What am I doing wrong
@TheCarKeyMan
7 ай бұрын
HI Clare, sorry been away. You're not doing anything wrong, if the car beeps then you've done it all correct, but the keys you have may not be transmitting correctly
@gav2011
2 жыл бұрын
Does this work with a key that I've bought from ebay and have only had cut? Thanks
@TheCarKeyMan
2 жыл бұрын
Hi Gavin, this video programmes the buttons on the key. The chip inside the key needs to coded using a computer
@warumdehbwoi
2 жыл бұрын
Is there any way to do this if original key is dead and i buy a brand new unprogrammed one?
@TheCarKeyMan
2 жыл бұрын
Hello Hugh, yes you can programme the buttons on a new key yourself, however the chip inside the key needs to be coded using a computer
@stephensmith5226
9 ай бұрын
Hi does this programme the key to start also? Or is there another to do that. Thanks really good video too
@TheCarKeyMan
8 ай бұрын
Hi Stephen, no sorry this only programmes the buttons. The chip needs to be programmed using software
@186scott
7 ай бұрын
I have had to replace my cars gem/bcm module how do I go about programing the central locking i have 2 keys but I only have the 1 that has the buttons
@TheCarKeyMan
7 ай бұрын
Hi, gave you tried this manual method? You can code in just one key
@DJAmandaAdams
4 жыл бұрын
just seen this after watching how to change the battery. What if you don't have a second key?
@TheCarKeyMan
4 жыл бұрын
There's no problem if you only have one key. Just switch the ignition on and off until the car beeps, or chimes, (normally four times) and then press one of the buttons. Then ignition on and off and that's it!
@MrBurningturnips
3 жыл бұрын
Hi does this work if you only have the one key my secondhand car came with?
@TheCarKeyMan
3 жыл бұрын
Yes, if you only have one key, just press the button on the key you have
@markedwards4764
3 жыл бұрын
Hi is this the same for a ford fusion key ? As I replaced the battery in the remote key fob.
@TheCarKeyMan
3 жыл бұрын
Morning Mark, yes the same key
@bstr0115
2 жыл бұрын
hi, can you use this method to forget a lost key too
@TheCarKeyMan
2 жыл бұрын
Hi, yes the lost key will no longer work the buttons using this method, however, the chip inside with still start the car. This can only be fixed using a computer
@theDRONEguytv
2 жыл бұрын
would this work on a ford ka 2003 ?
@TheCarKeyMan
2 жыл бұрын
Yes, it should do
@theDRONEguytv
2 жыл бұрын
@@TheCarKeyMan thanks chum but no good im afraid even with new battery??
@gurpalsinghbhambra5471
3 жыл бұрын
Hi, how can I programme the key if I only have one key? The one key that I have has suddenly stopped working, I've changed the batteries.
@TheCarKeyMan
3 жыл бұрын
Hello, if you only have one key that is no problem, do the same things as the video but just press the buttons on your key ;)
@gurpalsinghbhambra5471
3 жыл бұрын
@@TheCarKeyMan I tried that, but it didn't work. The car beeped, but when I pressed the buttons, nothing happened
@lindachevelle761
3 жыл бұрын
I can't get the car to sound after 0ressing remote button! I have no idea I got correct remote as car only came with the ignition key when purchased 2nd hand. How do I find out which key and frequency I need? It's a 2014 fiesta Ambiente (Australian release so European model I believe). I turn the ignition 8 times and get the chime but nothing when I press the remote to programme it 😞 Thanks.
@TheCarKeyMan
3 жыл бұрын
Hi Linda, do you get the car to make a noise after turnung the ignition on and off eight times ?
@lindachevelle761
3 жыл бұрын
@@TheCarKeyMan yes, but it won't make the noise to say the remote connected and remote still does nothing....
@MrGeoffrey1998
3 жыл бұрын
Isn't there a story of having to copy the transponder or i dunno what ? Like if i do what you did, for a 2009 fiesta, and i ask a locksmith to copy the original key and CNC it to the new one, it should work to start the car, open the doors, trunk etc ? Thanks !
@TheCarKeyMan
3 жыл бұрын
Hi, sorry for the delay. Yes you'll need to get the new chip coded so that it starts the car
@deepluvzmuzic
Жыл бұрын
Hi Steve, I have a 2009 ford fiesta S (Indian variant) I recently put a new battery in the car post which I observed that the car does not open with the remote key if it’s not in use for a couple of weeks and once it is opened manually through the door after ignition is turned on the key starts working properly.I am not sure if the programming of the key has any issue or if i forgot to disengage the security lock before putting in a new battery, not sure what could be the possible reason for the key not working..could you please share your thoughts on this case..thanks in advance. BR Deep
@TheCarKeyMan
Жыл бұрын
Hello, I've not seen this problem before, sorry
@christr.
2 ай бұрын
What if you only have a new fob that doesn't work and not an existing fob that works?
@hossamtaha9588
3 ай бұрын
It starts the car as well?
@TheCarKeyMan
3 ай бұрын
Hello, no unfortunately
@ashishashi411
4 жыл бұрын
Hello sir, I'm having a ford focus 2005 nd with only one key with in-built remote but its remote is not working. I purchased this car recently. Only key is working nd I purchased 1new flip remote frm amazon. I done the on off procedure thn beep comes but still its not working. And plus can you tell me how to activate the ignition key also. Thxs & rgds Ashish from Germany.
@TheCarKeyMan
4 жыл бұрын
Hello to you in Germany. Unfortunately, the immobiliser chip can only be coded with a computer. Have you looked for an Auto Locksmith that can do this for you?
@TheCarKeyMan
4 жыл бұрын
About the remote. Do you have a remote that works at the moment?
@ashishashi411
4 жыл бұрын
@@TheCarKeyMan yes the newly purchased with key is now working. After try 2-3 times nd key just opens the doors but could not start the car. I tried by doing 8times on off in the ignition which works once nd anti theft red light starts blinking. Once I off the ignition nd again tried to start but couldn't.
@ashishashi411
4 жыл бұрын
Now remote is fully working and I cannot start the car with in-built remote key. Pls guide me. Thxs & rgds. Ashish
@ashishashi411
4 жыл бұрын
@@TheCarKeyMan yes Autosmith is there nd I will check with them and get back to you soon. Thxs 4r the guidance. Rgds
@angeles3129
4 жыл бұрын
I only have one key for my car, can I use this method to program a generic fob ordered from Amazon? I hope this is not a stupid question, I am just not good at dealing with technology. Thank you.
@TheCarKeyMan
4 жыл бұрын
Hello Angeles. This is not a stupid question, and I'm asked it a lot. There are two parts to the key. The buttons operate the central locking and they can be programmed using the method in the video. However there is also a small electronic chip inside that needs to be recognised by the car before it will start. This can only be coded with a computer I'm afraid. I'm sure an Auto Locksmith will be able to look after you
@angeles3129
4 жыл бұрын
@@TheCarKeyMan Thank you
@masud.
6 жыл бұрын
Hi. Thanks for the useful trick to lock and unlock with a spare key. However, when attempting to start the engine with the second key, the red light in the middle of the dashboard blinks quickly leaving me with no other response. Basically the lock/unlock system is now working for the second key, but the same cannot be said when trying to start the engine. I have this problem on a late-2007 Ford Focus for which I bought a second key. Many thanks.
@TheCarKeyMan
6 жыл бұрын
Hi, there are two parts to the key. This video shows how to re-code the buttons when they stop working after a key battery change. However, the other part to the key is a small chip, and this allows the car to start. This can only be programmed with a diagnostic machine. I would suggest doing a search for a local Car Key Man, just search for an Auto Locksmith
@indrockz92
2 жыл бұрын
Facing a weird issue on my 2008 Fiesta. Auto Central lock isn't working ( both driver's side and passenger ) while driving. One can easily open the doors from outside. Plz help 🥺
@TheCarKeyMan
2 жыл бұрын
Hello Indrajit, can you lock up your car normally when you're not driving?
@indrockz92
2 жыл бұрын
@@TheCarKeyMan Yes central lock and unlock is working fine through key while not driving. Auto Central locking isn't working though.
@freesphere
Жыл бұрын
Worked perfectly with just one key, thank you!
@TheCarKeyMan
Жыл бұрын
That's great Michael :)
@tomasfecko9947
3 жыл бұрын
Hi ! I tried it exactly how u did that n car always make this noice when I'm turning with key but when I press button on key car is not making any noice n it's not paired...so key is not responding. I bought new n correct battery yesterday n I put it there correct way...Can u help me what problem I have ? Should I buy new key ? 🙂
@TheCarKeyMan
3 жыл бұрын
Hi Tomas. If the car responds it means you are doing everything correctly. However, if it doesn't when you press the key buttons, it's normally because the key isn't transmitting a signal for some reason. It will help if you get a local shop or Auto Locksmith to test your car key
@tomasfecko9947
3 жыл бұрын
@@TheCarKeyMan Thank u for help ! I'm going to visit the shop today n hope they will help me repair it Thanks again 🙂
@joannereed744
4 жыл бұрын
Just tried this and worked first time, thank you so much x
@TheCarKeyMan
4 жыл бұрын
You're welcome Joanne, thanks for watching :)
@emmapringle1945
3 жыл бұрын
I have a 2005 ford fiesta and when i try to lock the car it locks then quickly unlocks it does the same for both central locking and using the key in the door
@TheCarKeyMan
3 жыл бұрын
HI, This is normally caused by a door being slightly open.Even if all the doors are shut correctly, one of the sensors in the car may be faulty, which makes the car think the door is open. It needs looking at by an Auto Electrician
@matthewhall318
3 жыл бұрын
Hi I have a ford transit connect I turn my key four times and I get a beep, then when I hold down the button on the key I don't get another beep again, I have sat holding the button down for a good 2 mins before and no second beep comes. I really don't know what to do
@TheCarKeyMan
3 жыл бұрын
Hi Matthew. You are doing the correct thing because you get the beep. However, it sounds like there isn't a signal coming from your key, and so the van isn't hearing it. Once it hears the signal it should make the second beep and the key will work. You need to find someone who can test your key, an Aito Locksmiths or Timpsons shop> Hope thsi helps
@matthewhall318
3 жыл бұрын
The remote that I'm using currently works on my van I'm trying to program the new one I got and neither
@matthewhall318
3 жыл бұрын
Sorry and neither the old remote which works to open and close my van nor the new one give me a beep
@euantwiddy2143
2 жыл бұрын
I get the first beep but when I go to do the press any button I don’t get the beep again
@TheCarKeyMan
2 жыл бұрын
Hi Euan, if you get the first beep you are doing it correctly. The second beep only happens if the car can 'hear' the key transmitting, so maybe there's a problem with the key?
@Andurwho
3 жыл бұрын
Hi mate wondering if u can help, I’m trying to program the key in but my existing key is one without buttons so I’m not sure how to do it
@TheCarKeyMan
3 жыл бұрын
Hello, if your new key has buttons, just follow this video and only press the button on the new key
@jofta523
3 жыл бұрын
What if I have only one key and after changing battery it's not works?
@TheCarKeyMan
3 жыл бұрын
Hi, just do the same method, but just press the button on your one key
@MaxAmmoNeeded
6 жыл бұрын
Thanks you, I just got my key working again, it stopped after I changed batteries. Really appreciate that mate.
@TheCarKeyMan
6 жыл бұрын
That's great, glad you got it sorted!
@Yasser_000
7 ай бұрын
hello i wanna buy another key for my fiesta 2006 how do i know the ship to use is 4d60 or 4D63 or maybe Id60 or Id63 ?
@TheCarKeyMan
7 ай бұрын
Hello, it depends how old your fiesta is. The older Fiesta is a 4C chip, but after 2003 you’ll need an ID63
@Yasser_000
7 ай бұрын
mine is 2006 but i don't know witch one to buy if u have any advice for me please !!@@TheCarKeyMan
@wesckitrongal6257
6 ай бұрын
@@TheCarKeyManI have a 2005 fiesta and I'm not sure wich transponder I should get. The 40 bit ID63 or the 80 bit? ID63?
@InFerso
Жыл бұрын
Cant get the car to make the programming beep, but it makes beeping sounds eveytime i turn the key
@TheCarKeyMan
Жыл бұрын
Ah that's odd, do you have the doors closed?
@shellbeevillain33
5 жыл бұрын
i only have one key and the battery has died, will i need to do this when i replace the battery? what do i turn it to for the 4 times? is it the "ll" position? and when it beeps just press any button on fob return to off position and it should work?
@TheCarKeyMan
5 жыл бұрын
Yes, that's about it! Let us know how you get on
@thebatjon
4 жыл бұрын
Good video thanks. I've bought an aftermarket key from Timpsons which has remote locking and can be programmed in this way. Would there likely be any issue with the immobilizer using a key from Timpsons? Thanks
@TheCarKeyMan
4 жыл бұрын
Are they going to programme the immobiliser? If they are, then you'll be fine
@thexparasite186kizz3
4 жыл бұрын
if i bought a flip key and had my chip inside would this method work or only with the original style key many thanks in advance
@TheCarKeyMan
4 жыл бұрын
Hi, this will work with a flip key also
@thexparasite186kizz3
4 жыл бұрын
thx loving the content helps a lot
@wesckitrongal6257
6 ай бұрын
I have a 2005 fiesta 68hp 1.4tdci and I'm not sure wich transponder I should get. The 40 bit ID63 or the 80 bit ID63?
@TheCarKeyMan
6 ай бұрын
Hi, ID63
@wesckitrongal6257
6 ай бұрын
@@TheCarKeyMan 40 bit or 80 bit?
@gadget_girl13
4 жыл бұрын
Hi, will this work on a key I purchase separately from the car? Only had 1 key & unfortunately not the electronic fob!!! It's a 2004 FF finesse 😊 thanks in advance 😁
@TheCarKeyMan
4 жыл бұрын
Hi Dannii. There are two parts to the key. You can programme the buttons using the video. However the key won't start the car. There is a transponder chip in the key and this needs to be introduced to the car, this can only be done with diagnostics
@gadget_girl13
4 жыл бұрын
@@TheCarKeyMan thank you, that's fine, it's just to unlock & lock!
@shellbeevillain33
4 жыл бұрын
after the beeps are you starting the engine or just turning it to light up panel again?
@TheCarKeyMan
4 жыл бұрын
Hi, no don't start the engine, just ignition on, then off to finish
@hoodedraider
6 жыл бұрын
So, I have a question: I bought a ford focus with a normal key and a remote key. I have put a new battery in the remote key. I tried putting the car in program mode, that went well. But it does not seem to register the click of the remote key to program it. So is there a way to test if the remote is sending out a signal when pressed?When the key part is removed from the remote part should i be able to get visual feedback when pressing the button? There is a chance the remote is broken but i dont know how to test this.
@TheCarKeyMan
6 жыл бұрын
Hello Thanks for the question. Ok, so a key cutting shop will have a key fob tester. They check if a signal comes out when the key is pressed. Here is the link to what I mean www.ebay.co.uk/itm/Sealey-INFRA-RED-RF-Key-Fob-Remote-Control-Tester-Detects-new-BMW-frequency/180978852285?hash=item2a232e21bd:g:uUAAAOxy7rdREmf8 Now a friendly key shop should have one and if you ask them to check the battery, they should check to see if it works. There isn't any other way to test it i'm afraid, other than getting a fob you know does work ( off another Ford Focus, Mondeo,fiersta etc, and trying to code it in. If it works on a different remote then you know that your one is faulty.
@rodneywilliams547
6 жыл бұрын
key. ch*an
@topboy9785
3 жыл бұрын
I have a 2004 zetec and only have the spare key 😢 if I got one with the fobs will this still work ?
@TheCarKeyMan
3 жыл бұрын
Hi. This video shows you how to programme the buttons of a new fob. Inside the fob is also a chip that can only be coded using a computer. Do a search for a good local Auto Locksmith and I'm sure it won't cost that much
@richardbarker1633
3 жыл бұрын
My key of my 06 SMax isn’t working. I’ve change the battery. My prongs look different (seen in your other video) is there a way I could show you the image of my prongs? But also thinking the battery change might not have worked because I haven’t done this reprogramming part. If I do the ignition on off and my key doesn’t sync up still, does it immobilise my car? Or can I still use it drive. I only have 1 key. Any help would be hugely appreciated. Richie
@TheCarKeyMan
3 жыл бұрын
Hi Richard, sorry for the delay with answering. Firstly, you can try and code in the buttons and you won't immobilise the car, do not worry. Try and programme it in using this video and let me know how you get on ;)
@anneb793
7 ай бұрын
I have non remote keys for my 2008 ford fiesta and central locking has stopped working. How would I get it working again?
@TheCarKeyMan
7 ай бұрын
Could be anything I'm afraid, a garage need to look at it really
@davekrolik9784
4 жыл бұрын
Hi @The Car Key Man, I have a Ford fiesta zetec 2008 and I have a key that starts the car but doesn't have remote locking (doesn't have any buttons on it). Can I use this key to program and a new remote key fob to work with the immboliser as well as the central locking? Or do I have to program it though the OBD port? Thanks for any help in advance
@TheCarKeyMan
4 жыл бұрын
Hi Dave, you need to code the immobiliser using the OBD port
@stephenpedlow6762
3 жыл бұрын
would this work with tho only one remote key fob as mine can be unresponsive at times
@TheCarKeyMan
3 жыл бұрын
Hi Stephen, yes you can ust programme one remote, no problem :)
@stephenpedlow6762
3 жыл бұрын
@@TheCarKeyMan thank you , it worked :)
@wailkouchih8148
3 жыл бұрын
Hey Steve. When I press my lock button on my key it opens immediatly after automatically. Same when I try to do it by hand on the key lock, I lock the door by hand and it opens immediatly. Any advice?
@TheCarKeyMan
3 жыл бұрын
Hi, this is what is known as 'bouncing'. The car thinks that one of the doors is open, and therefore will not let you lock it. Give all teh doors a god slam, and see if it makes any difference. Long term you need to work out which door switch is faulty, a good auto electrician will be able to do this
@moaz888
4 жыл бұрын
Thanks alot worked fine on my s max 2007 and saved a lot of my time
@TheCarKeyMan
4 жыл бұрын
Great stuff :) Thanks for watching
@tibo786
5 жыл бұрын
I have lost my key with the remote and i only have the spare key without a remote now. I understand how to program the buttons for the central locking but if i were to get a new key i would have to reprogram the transponder chip. Is that something that i can do myself or do i need to go to a specialized shop for this? I don't live in the uk so i can't come to you guys.
@TheCarKeyMan
5 жыл бұрын
Hi Tibo, the chip can only be coded with either a computer, or two working keys.
@beemerhappy
3 жыл бұрын
@@TheCarKeyMan Can you tell me how to purchase a key which will work the central locking as I've just bought a car for my son and it only comes with a key that doesn't operate this........
@DolphinFriendlyTuna
2 жыл бұрын
Hello I have two remote keys. One was working while the other was not. I wanted to programme the other key so it programmed but the other stopped working. I swapped the batteries but now both have stopped working 🤬😡 Got new battering but they are not programming when i press any button. Tried the process several times but no idea what is going on now. Can you please advise?
@TheCarKeyMan
2 жыл бұрын
Ok, so if you have managed to programme them in separately, then this is good news, because you know both work. Well the difficult thing can be getting the car into programming mode. Sometimes it takes more than 4 turns on and off of the ignition. Sometimes the car doesn't make any noise to let you know you are in programming mode. It really is just a case of keep trying until it works, there's no magic trick, sorry
@DolphinFriendlyTuna
2 жыл бұрын
@@TheCarKeyMan hello, no you misunderstood slightly. The car goes into programming mode and i hear the beep but the keys are not programming. It programmed the other key that was not working, but now both keys are not working. Is there a way of resetting the remotes in the keys or the remote locking device?
@MultiAbinash
4 жыл бұрын
My ford figo 2010 originally came with one normal key and a remote key and I have lost my remote key. How to get the key with out changing whole central locking? P.s. i have the same key as shown in video.
@TheCarKeyMan
4 жыл бұрын
Hi Abinash. I'm not sure of that model, what country are you in please? If the key looks the same, there are four things to think about You need a decent key. These keys are one of the few on the market that can be reused from one car to the next, so you could get a used key from another car, and just put a new blade on it. Next, you need to find someone to cut the key, which is easy enough if you find someone good Third you need to get the small electronic chip coded. This can only be done with a computer. Lastly, you can code the buttons using the method in this video. Hope this helps
@bubo45ful
3 жыл бұрын
hello i want to ask if i can code a new remote because my original is broken? is it necessary for the coding to work and the original remote??? Thaks!
@TheCarKeyMan
3 жыл бұрын
Hello, what is the car please?
@benstanway8553
Жыл бұрын
Hi mate i replaced the motherboard in my key as the buttons didnt work at all. Ive reporgrammed it and now it locks and boot unlocks. But the car itself wont unlock
@TheCarKeyMan
Жыл бұрын
Hi Ben, maybe these's a fault on teh key. If the car responds to the key in any way, then the key is coded in correctly
@crystalmeth1789
Жыл бұрын
Thank you! Key was not working after battery change, turns out this was the solution.
@TheCarKeyMan
Жыл бұрын
Great stuff! Glad it helped :)
@marcusjohnson3839
7 ай бұрын
Could not get my 2002 Fiesta to go into programming mode even after 20 turn on/off. Using standard key with blue transponder. Any ideas?
@TheCarKeyMan
7 ай бұрын
is it the rounded shape, or the first of the new shape at 2002. They changed shape in 2002
@dennisoneill8148
5 жыл бұрын
You have to have both keys to do this or can you have just one?
@TheCarKeyMan
5 жыл бұрын
Hi Dennis, you can just have one, it will still work
@dennisoneill8148
5 жыл бұрын
@@TheCarKeyMan ok thanks
@TejSwaroop
4 жыл бұрын
Help: 2014 Ford Fiesta SE (Flat Key) - The car beeped after 4 simultaneous on/off but does not beep after pressing a button on original key.
@TheCarKeyMan
4 жыл бұрын
Hi, well you are doing everything correctly, it sounds like the car is going into programming mode. However it sounds like the key isn't transmitting a signal, (the car isn't detecting the key).
@TejSwaroop
4 жыл бұрын
@@TheCarKeyMan Thank you :) you mean the original key is faulty or the duplicate key I am trying to program is faulty ?
@TheCarKeyMan
4 жыл бұрын
Hi, sorry I missed your reply! Well once the car beeps then any key you press should make the car beep again. This simply means the car has 'heard' the key. Does that make sense? So if the car beeps when you press the button on your original key, but not on the new one, then there is a problem with the new key
@siddarthagunti2142
Жыл бұрын
Thanks a lot u saved my day .. I was soo frustrated.. thanks 😊
@TheCarKeyMan
Жыл бұрын
You're welcome Siddartha, really pleased it helped :)
@Stefanosfz6
3 жыл бұрын
I have a fiesta 2003 model I have done the process but I don't hear the beeb. Do you know what maybe the problem?
@TheCarKeyMan
3 жыл бұрын
Hi Stefanos, have you had a remote key before with this car?
@Stefanosfz6
3 жыл бұрын
@@TheCarKeyMan No I just bought the car and they gave me only 2 analog keys
@dflynnphotography
4 жыл бұрын
Can’t get this to work. Noticed nether car was locking and unlocking intermittently so changed the fob battery then tried your steps here and I get the chime but key will not program. I can’t access my boot now as it’s electronic only. I’m stumped. Fiesta 2009 plate.
@TheCarKeyMan
4 жыл бұрын
Hi, If you're getting the chime you're doing everything correctly. The problem is that the car is not 'hearing' the key. If it can't detect the key, then maybe there's an issue with the battery you've put in?
@STMONDEO1
5 жыл бұрын
Thanks for the video i have been struggling for a long time to do this with my second key. Well done.
@TheCarKeyMan
5 жыл бұрын
You're welcome Peter :)
@michelebaffari99
2 жыл бұрын
Hi, thank you for the video? Will this work also for an MK4 (1998) fiesta? both my 2 key fobs don't work anymore, I only can open manually the doors and I'm also able to start the engine but the alarm red LED stays always on. My key fob has only 2 buttons (one for open and close the central locking and the other one to activate the alarm). Is it possible to clone it using the 3 button key fob type (the one you show in the video), because I can't find the 2 button model ? Thanks
@TheCarKeyMan
2 жыл бұрын
Hello Michele, it really depends. This method may work for your car, but from memory there is another method that involves turning the rear demister on and off while programming. (it will be on the internet somewhere) I think a three button key will code in fine to yors, but again, it's been a while. Best advice is to find a good local car key person and get some advice locally
@michelebaffari99
2 жыл бұрын
@@TheCarKeyMan ok, thank you for the adivces.
@justinthomas5308
3 жыл бұрын
What's the process for a 2004 ford fiesta zetec? Thanks
@TheCarKeyMan
3 жыл бұрын
Hi Justin It's exactly the same, let us know how you get on ;)
@justinthomas5308
3 жыл бұрын
@@TheCarKeyMan Thanks I'm not getting the chime after doing the cycle!! Just need to find out if my car has keyless entry, as I only have 2 standard tibbe keys.
@angrygamer4700
3 жыл бұрын
Definitely works for a Ford Focus 1.6 auto 2002 mk1.5 facelift model (indicator’s in the headlights version lol) I changed the battery in my single key and as per usual the remote bit thingy me bob thing stopped working and so looked for a fixed and found this video and another and thought the usual fake news bullshit so of I went to my car and wow hang on this shit works man the car bleeped after 4 turns so I quickly pressed one of the buttons on my key and double shit after about 6 attempts I thought this doesn’t work so locked the car manually and walked off came back to the car and thought I’d try one of the buttons on my key and as if by magic my key works fine now ; ) o7 ......
@TheCarKeyMan
3 жыл бұрын
That's great, sometimes there isn't any response from the car, not sure why, but it still works! Glad it helped you :)
@AzizEkinci
4 жыл бұрын
You are fantastic Key Man. Great pleasure to you...
@TheCarKeyMan
4 жыл бұрын
Thanks for watching :)
@sammyv4468
6 жыл бұрын
Hey thx for this vid, have tried this but only get the first beep then i press a button on the keys and nothing. Keys had new battery so i'm at a loss, any ideas?
@TheCarKeyMan
6 жыл бұрын
Hi Sammy, you are doing it correctly. The reason you don't hear second beep is that the car is not hearing a signal from the key. Have you seen our video that shows how to change the key battery?
@TheCarKeyMan
6 жыл бұрын
Here's the video. kzitem.info/news/bejne/qX6em3mOommkl6g
@Furball6433
2 жыл бұрын
Could I do this with a new key if I don’t want the new one to work?
@TheCarKeyMan
2 жыл бұрын
Sorry Adam, I don't follow you
@arslansunny8293
2 жыл бұрын
I have tried this but it didn't work. After turning ignition on off 4 times I got a beep but when I pressed any button on key nothing happened.
@TheCarKeyMan
2 жыл бұрын
Hi Arslan, well you are doing everything correctly, but the car cannot detect the key when you press the button. You need to get the key checked out to see if it is transmitting a signal
@arslansunny8293
2 жыл бұрын
How can I check if there is any signal or not?
@nikitjangid3128
4 жыл бұрын
What about engine immobilizer sensor? Do we need any tool to pair it or copy it?
@TheCarKeyMan
4 жыл бұрын
Hi Nikit, the immobiliser chip needs to be coded using a computer
@nikitjangid3128
4 жыл бұрын
The Car Key Man exactly i was just wondering this chip pairing was no added in video thank you 🙏
@scoobysienna
4 жыл бұрын
im having problems with my imobliser it wont open the car.ie the lights dont flash like normal.i can open the car and ignition lights come on.but it wont turn.i have a ford focus 1.6 2006 titanuim.i just tried the above ,but it didnt work just made a ticking noise at the front and when i locked it one doors was still open..help please
@TheCarKeyMan
4 жыл бұрын
Hi Darren, does the car still start?
@MultiMaccattack
2 жыл бұрын
I find if you program one key the other keys central locking stops working
@TheCarKeyMan
2 жыл бұрын
Hi, did you manage to sort this out?
@DjPigsterProductions
4 жыл бұрын
Hi buddy do you know what chip the key fob had? 4d60 or 4d63 for this car?
@TheCarKeyMan
4 жыл бұрын
Hi, what car have you got?
@DjPigsterProductions
4 жыл бұрын
@@TheCarKeyMan 07 fiesta 😊
@gmdilee
5 жыл бұрын
Hi Steve, will this procedure work on a 2013 ford Fiesta?
@TheCarKeyMan
5 жыл бұрын
Hi, yes even if it is a flip key, it will still work. Let us know how you get on ;)
@gmdilee
5 жыл бұрын
I tried the 4, 5, and 8 times but I don't hear anything no beep!
@TheCarKeyMan
5 жыл бұрын
Hi, sometimes you don't get a beep. I'm not sure why, but the car still goes into programming mode. Did you get it to work?
@gmdilee
5 жыл бұрын
No, unfortunately not working for me. There is no beep or nothing. The key works great starting the car. To open the trunk, I have to unlock from the inside at the console. Any ideas. I heard about fuses in another video. What do you think?
@TheCarKeyMan
5 жыл бұрын
Have you ever had a key with buttons that work? Or have you always had a key that you have to put in the door lock?
@zibimothoa913
Жыл бұрын
Hi how do I replace my door locks,the car uses electric key
@rogeliozane232
2 жыл бұрын
The end 😂 I was like ooh okay 🤝👏👏
@TheCarKeyMan
2 жыл бұрын
Well done Rogelio :)
@bafanamsibi4478
5 жыл бұрын
Hi. Does it work on ford figo 1.4 2010? I tried it today and I didnt get a beep. Pressed the buttons nothing. My buttons were working until monday morning. Was washing my car on sunday - played music for 2 hours or so, i figured that might have affected my car battery cos i struggled a bit to get the car to start later that sunday. I bought a new battery yesterday for the key. No luck.
@TheCarKeyMan
5 жыл бұрын
Hi Bafana, what country are you in please?
@bafanamsibi4478
4 жыл бұрын
@@TheCarKeyMan Hi. I finally managed to get it right. I was clearly doing it incorrectly. Thank you very much for your help.
@andyliverpool24
Жыл бұрын
Will this work if the only key I have doesn't operate central locking ?
@TheCarKeyMan
Жыл бұрын
Hi Andy, yes, as long as the car is fitted with remote central locking
@andyliverpool24
Жыл бұрын
@@TheCarKeyMan thanks for the reply
@giuseppelombardo4311
Жыл бұрын
Vale anche per ford focus mk2 del 2005?
@TheCarKeyMan
Жыл бұрын
Yes, the same car
@summerbryan9727
4 ай бұрын
how do i change to unlock sequence from all doors to drivers door, passenger door, back doors?
@TheCarKeyMan
3 ай бұрын
Hi, not sure I’m afraid. I expect it’s in the manual
@mk56_newt
4 жыл бұрын
Can you program a key if your key doesn't have the buttons
@TheCarKeyMan
4 жыл бұрын
Hi Paul, what model and year is the car please?
@cp1979rp2008
2 жыл бұрын
This works for remote access, but the new key still won't start the ignition. What now?
@TheCarKeyMan
2 жыл бұрын
Hi Carl, the chip inside the key can only be coded using diagnostics, sorry
@claire1407cj
6 жыл бұрын
Hi, i've changed the battery in my key fob as per the instructions in.your video, my key still won't work, i get the first beep when trying to reprogramme the key but don't get the second beep when you press the button on the key fob...any advise please...been driving me mad 😭😭xxx
@TheCarKeyMan
6 жыл бұрын
Hi Claire, you are doing it correctly. The reason you don't hear second beep is that the car isn't hearing a signal from the key. Have you seen our video that shows how to change the key battery?
@claire1407cj
6 жыл бұрын
The Car Key Man. Hi, yeah i watched and followed the changing the battery video but still don't get that second beep.xx
@TheCarKeyMan
6 жыл бұрын
When was the last time it worked? Did it gradually get worse or did it stop suddenly? Have you had the key tested at a key cutting shop to see if it's sending out a signal?
@claire1407cj
6 жыл бұрын
The Car Key Man, my other half took the battery out a few months ago put it straight back in but it hasn't worked since, will take it and get it tested. Thanks for your help.xx
@TheCarKeyMan
6 жыл бұрын
Have you seen this? kzitem.info/news/bejne/qX6em3mOommkl6g
@romeovarga6413
4 жыл бұрын
I've only got one key with buttons, the other is a plain one. Central locking/unlocking stopped working today and immobiliser, of course, prevents me from starting the car.
@TheCarKeyMan
4 жыл бұрын
Hello Romeo. Ok, so first thing is that the immobiliser is not linked to the buttons. So the key will still start the car even if the buttons stop working
@romeovarga6413
4 жыл бұрын
@@TheCarKeyMan Thanks for that, worth knowing for future reference. Turns out my issue was very simple - car battery. Once I replaced the fob battery I went back to try only to find everything dead, no immobilizer flashing etc. Then it was clear. Replaced the battery and it fired up.
Пікірлер: 518