are bhai ...india me rahte khate pite kamate to ho...bt english me video q banai...hindi me banaoge to izzat kam thori na ho jayega...aur subscriber badega hi yadi video hindi me ho to....english kitno ko samjh aayega thk se
@ArnovSharma
4 жыл бұрын
Banunga bhai, banunga.
@davidkinuthia1052
3 жыл бұрын
hallo your explanations actually worksed for me thankyou so much
@sameerk12982
3 жыл бұрын
Excellent tutorial..with clear explanation... Try to program this tiny controllers without bootloader it will save memory... you can use control registers directly from arduino code and save space.
@mjyanimations1062
3 жыл бұрын
I can't find attiny13a in the list of boards of attiny core. can anyone help me?
@ArnovSharma
3 жыл бұрын
Try this - github.com/MCUdude/MicroCore
@mjyanimations1062
3 жыл бұрын
@@ArnovSharma Thanks so much
@fireracerworkshop8251
4 жыл бұрын
I have a question, Can I make a boost converter having a frequency of 100khz to 300khz using at tiny 13A or should I use the at tiny 85 or more preferably an Arduino nano. I also want to give boost converter a variable voltage and current so is at tiny 13a suitable?
@ArnovSharma
4 жыл бұрын
Yup. It is suitable
@fireracerworkshop8251
4 жыл бұрын
Thanks man
@easymathtricks3920
3 ай бұрын
BHAI PROGRAMMER KAHA SE AGYA BICH ME HUM TO ARDUINO UNO SE KRNE VALE THE
@01100ALLtypevideos
4 жыл бұрын
Thank you. Your video is very helpful for me
@saduniwathsala
Жыл бұрын
Were about attiny10
@SouKube
3 жыл бұрын
Great channel an I don't think there are many who explains it so well. Keep it up. I wish you have more viewers and subscribers. Do you have patreon ac.
@ArnovSharma
3 жыл бұрын
Thank you so much
@aaronaverill9271
5 жыл бұрын
If you are using ATtiny13, you can save 300-500 bytes by using the GNU AVR toolchain instead of the drazzy core
@arreglalotodotumismo1316
4 жыл бұрын
hola mira este proyecto de attiny 13: bit.ly/2SAm1HM
@startobytes
4 жыл бұрын
Thanks, I am awesome!
@arreglalotodotumismo1316
4 жыл бұрын
hola mira este proyecto de attiny 13: bit.ly/2SAm1HM
@ArnovSharma
4 жыл бұрын
Yes you are!
@funbirdsaditya7129
4 жыл бұрын
Hello Sir Can I ask you something Can you Build 2 channel RC plane with this please please please
@ArnovSharma
4 жыл бұрын
Actually I'm working on an 2 channel RC drone, will post next week
@funbirdsaditya7129
4 жыл бұрын
@@ArnovSharma please make RC plane
@ArnovSharma
4 жыл бұрын
@@funbirdsaditya7129 Will do that in future!
@saduniwathsala
Жыл бұрын
Nice
@yukashy
4 жыл бұрын
Thanks! Abraços do Brasil! 🇧🇷
@ArnovSharma
4 жыл бұрын
Thanks!
@rohit1701d
5 жыл бұрын
Can you show a tutorial of burning a servo sketch to a ATTiny85?
@jmmjjmmj8994
4 жыл бұрын
It has 2 PWM channels
@jmmjjmmj8994
4 жыл бұрын
Pin 5 and 6 are PWM
@arreglalotodotumismo1316
4 жыл бұрын
hola mira este proyecto de attiny 13: bit.ly/2SAm1HM
@Joe_Galaska
5 жыл бұрын
Thank you. Your video is very helpful for me.
@arreglalotodotumismo1316
4 жыл бұрын
hola mira este proyecto de attiny 13: bit.ly/2SAm1HM
@dassajityadav5555
4 жыл бұрын
Super sir
@0124akash
4 жыл бұрын
Hindi me explain karte to sabko samajh me aata
@ArnovSharma
4 жыл бұрын
hindi mai banana ta hu bhai
@dassajityadav5555
4 жыл бұрын
Sir atiny 2313 not program please make video on this sir or suggest how yo program
@ArnovSharma
4 жыл бұрын
Sure!
@dassajityadav5555
4 жыл бұрын
@@ArnovSharma thanks sir i am waiting by your support i tried attiny13 and now 2313
@dassajityadav5555
4 жыл бұрын
@@ArnovSharma select attiny2313( nobootloader) 1mhz programer as arduino as isp attinycore invalid device signature double check connections and try again or use F to override
@dassajityadav5555
4 жыл бұрын
@@ArnovSharma sir avrdude avr part attiny2313a not found show but in avr conf file only attiny2313
@goutam4721
3 жыл бұрын
Sir arduino uno se Pic12f675 ko program kar sakte hay kya
@ArnovSharma
3 жыл бұрын
Haan Kar skte hai
@goutam4721
3 жыл бұрын
@@ArnovSharma plzz sir batye kese kar sakte hay plzzz
@hindtraders9316
4 жыл бұрын
I want some discussion.
@ArnovSharma
4 жыл бұрын
Yes how may i help you
@hb9zcf476
2 жыл бұрын
Super Video. Short and clear.
@zivanovicmiodrag
5 жыл бұрын
Thanks your're awesome
@arreglalotodotumismo1316
4 жыл бұрын
hola mira este proyecto de attiny 13: bit.ly/2SAm1HM
@_crazytechz
4 жыл бұрын
Awesome mate , Great video and clear explanation helpful Your support is highly valued Thanks thanks
@ArnovSharma
4 жыл бұрын
Thank you!
@gabelanz9188
4 жыл бұрын
What if you want to read what's on the attiny13a?
@ArnovSharma
4 жыл бұрын
That's possible but with atmel studio and USBASP
@vijayvarsani07
4 жыл бұрын
i cant upload program
@ArnovSharma
4 жыл бұрын
Did you wire everything properly?
@kartechindustries3069
4 жыл бұрын
Pls help me to install attiny board bro
@arreglalotodotumismo1316
4 жыл бұрын
hola mira este proyecto de attiny 13: bit.ly/2SAm1HM
@ArnovSharma
4 жыл бұрын
Install the core file of attiny by spence kend bro.
@akshatkk1032
4 жыл бұрын
Sir can we program 8051.
@arreglalotodotumismo1316
4 жыл бұрын
hola mira este proyecto de attiny 13: bit.ly/2SAm1HM
@ArnovSharma
4 жыл бұрын
Sure we can
@akshatkk1032
4 жыл бұрын
@@ArnovSharma sir can u plzz tell me
@dassajityadav5555
4 жыл бұрын
For remote IR we can use ATTINY 13 or not sir please auggest
@ArnovSharma
4 жыл бұрын
Actually attiny13a is not compatible with ir master library, you can use Attiny85 with IR remote as it is compatible
@dassajityadav5555
4 жыл бұрын
@@ArnovSharma thanks sir for fast response in some of youtube video IR sensor used i want to use IR sensor base 4 output
@dassajityadav5555
4 жыл бұрын
Attiny 13 is low cost thats why
@ArnovSharma
4 жыл бұрын
@@dassajityadav5555 agreed but it mainly used for triggering mosfets, transistors, leds, button projects etc. It cannot drive servo motor or lr receiver, neopixle etc.
@dassajityadav5555
4 жыл бұрын
@@ArnovSharma thanks sir you are best one
@Reach3DPrinters
4 жыл бұрын
Excellent, thanks.
@arreglalotodotumismo1316
4 жыл бұрын
hola mira este proyecto de attiny 13: bit.ly/2SAm1HM
@muhammadbarcha526
4 жыл бұрын
Arduino R3 ??
@ArnovSharma
4 жыл бұрын
yes, but you can use also use a nano
@muhammadbarcha526
4 жыл бұрын
can program via smartphone, i do not have a computer
@ArnovSharma
4 жыл бұрын
@@muhammadbarcha526 I don't think so, because we have to change the programmer to ICSP. if the phone version of Arduino has this feature then yes we can program attiny via smartphone.
@SHANUSHAH
5 жыл бұрын
Cooll Video, clear instructions , well done keep it up.
@arreglalotodotumismo1316
4 жыл бұрын
hola mira este proyecto de attiny 13: bit.ly/2SAm1HM
Пікірлер: 86