NEW 13 July 2019 Update
Full translation user guide here:
drive.google.c...
The start of the video makes me look like I have the shakes, it's just a flaky camera!
This is a quick explanation of the 10 parameters available on most of the current Chinese scooters, especially the T11x range.
Care should be taken when changing any parameter and make a note of your existing settings.
P0 Wheel Motor Size for speedo calibration inches 0-99 (11)
P1 Low Voltage Cut-off 12.0-56.0 (520)
P2 Motor Pole Pairs 0-99 (16)
P3 LCD Display On/Off 0 or 1 (0)
P4 KPH or MPH 0 or 1 (1)
P5 Kickstart 0 or 1 (0)
P6 Cruise Control 0 or 1 (0)
P7 Power Start 0 or 1 (0)
P8 Power Level Dial Back 1-100 (100)
P9 Regenerative Braking 0,1 or 2 (1)
The P9 option is well worth investigating. You need to find the right balance here; if used in mode '2' you will lose the benefit of freewheel riding but gain battery trickle charging and if you ride in a very hilly environment, will save brake pad wear. But the electro-braking can snap in hard and unpredictably as soon as you release the throttle. If riding mostly on flat terrain, best to turn off completely. At the moment I use mode '1'.
Extra LCD Info:
TIME:Means Time from switching Scooter on
TRIP: Means single trip mileage (can be reset by holding MODE button)
ODO: Means accumulated mileage
DST: Means range of scooter in real time time with remaining battery
VOL: Means battery actual voltage
CH 2:00 : Means after 2 hours scooter will sleep if not used
Please share your thoughts...
Негізгі бет Programming Electric Scooters for 10-Setting Variants (P0-P9)
No video
Пікірлер: 342