This was a good one for me. Programed my first key, no issues. My original keys have button issues and no longer unlock the Jeep. Saved me over $500 programming 2 new keys. 2010 Jeep JKU.
@as8561
2 жыл бұрын
Thank you! Amigo! Worked perfect! You went a bit fast in the beginning but glade you explain it again at the end 😅
@tubatodd
Жыл бұрын
Thank you for this video. I just programmed 4 additional keys I got off Amazon and cut at Home Depot.
@CliffsHowTo
Жыл бұрын
Nice!!!
@mrmikemartin
Жыл бұрын
I tried this and it worked! 2 blanks from keylesstogo, $12 Locksmith charged my $5 each to cut the keys Total cost: $22
@ap71chevss
22 күн бұрын
Your way worked the 1st time i tried it! One video on here shows holding the gas pedal as part of the sequence, but that was not correct and would not work on mine. Thanks!!👍👍
@kelsey8008
2 жыл бұрын
I was bummed because we only had one key FOB but had an aftermarket key (no unlock/lock buttons just a key) that I used first (the 3-15 secs.) Then our only key FOB to activate the programming and it worked! Thanks for the video.
@tonyweis08
2 жыл бұрын
I got a Jeep patriot 2014, and i only got one jey fob.. can i do same way You did ?
@msgogeke
2 жыл бұрын
@@tonyweis08 I mistakenly said it was an aftermarket key I used (not a FOB). We got one gray, one black (door only) and a key fob. I think if you got a the original key(s) with your Patriot it should work? I don't see why not. I really don't know much about how it worked, just that it did! Good luck!
@stephenmahon6714
3 ай бұрын
Think you just answered my question , thanks I’ll give it a try . I only have one key FOB . Because I just asked if it was mandatory to have both original keys 🍺🍀🍺
@w9jim
Жыл бұрын
Worked perfectly first try. I watched another video that showed holding down the gas petal. That one didn't work. It's nice to have a couple of spare working keys, just in case.
@joanderson9542
2 жыл бұрын
Thanks! Took me a few tries to get the sequence right on a 2009 Jeep Liberty but it worked! 🙌
@anthonypatete6759
8 ай бұрын
THANK YOU!!!!! WORKED JUST LIKE YOU SAID IT SHOULD! ✊🏽👊🏼✊🏽👊🏼✊🏽
@MGOpinoygotchu
2 жыл бұрын
Thanks for the video got mine working. Also my local Ace Hardware didnt even charge me for getting 2 keys cut.
@chipdouglas1983
Жыл бұрын
Also worked on my 2007 Grand Cherokee with after market fobs. The cluster shows "Programming Mode" on the car when you put the second key in to let you know its working.
@mrchrish3022
Жыл бұрын
Worked on a 05 Jeep Grand Cherokee Limited Awesome thanx
@nightcat87
2 жыл бұрын
Great explanation. I'ma buy me a couple keys.
@eegg6954
2 жыл бұрын
The bows on these keys are too big to fit many of the key cutting machines, and "locksmiths" in New York want $125 just to cut my blank. I was so fed up with driving around looking for someone to cut a key that I found a Chinese key cutter on ebay for $115. Works great! Never again will I have to beg one of these thieves to cut a key for me!
@Viccr72323
2 жыл бұрын
What is the key cutter called?
@720erik2
4 ай бұрын
Thanks man you made my day
@samtastic2339
2 жыл бұрын
Worked on Dodge Nitro 2008! 👍
@mevludijeuseinoski3526
Жыл бұрын
I have a 2010 I'll try it
@kensulzen3654
2 жыл бұрын
You made it super simple. 👍👍✌️
@bradleyporter5454
Жыл бұрын
If you only have one key, take it to a local locksmith that does automotive keys. They’re able to program a second key without going to the dealer and then you can program your own keys
@Officer239
2 жыл бұрын
I’m going to try this on my compass and see if it’ll work, I want to have 4 keys for it total
@Fatyaqui
2 жыл бұрын
Can you use a Transponder key and the primary key to program another keyfob? My Jeep is an 08 Jeep Liberty Sport the only came with the Transponder Key and Keyfob, the original owner lost one of the keys and only got a transponder to replace it. I have the new keyfob already cut and ready to be programed. I will try your technique with my transponder key and see if it works. Otherwise I might have to pay an arm and leg to get it programed. Thank you for sharing.
@CliffsHowTo
2 жыл бұрын
I think so. Try it!
@Topkiller3
Жыл бұрын
Did it work for you
@Pisces224
Жыл бұрын
I used my two transponder keys to program it, the red light flashed but didn't start the car.
@stephenmahon6714
3 ай бұрын
Is it necessary to have 2 original keys? Could I just , pull the 1st key , then re- install same key ? Then add spare ? Or is it mandatory to have 2 original keys ….
@CliffsHowTo
3 ай бұрын
I believe so.
@robbingervais4885
2 жыл бұрын
I have a 2005 Grand Cherokee; I have two working keys. I bought two separate keys from Amazon. I tried to program with this method. After second key is removed, it says programming mode. When I insert the third key, it says, "Key not programmed" and then it says, "Damaged Key". I find it hard to believe that 4 key would be damaged. All 4 do the same. The seller says they are the right key. Any ideas?
@CliffsHowTo
2 жыл бұрын
Not sure what to say about that one…
@mach1553
2 жыл бұрын
What if you have only one key? Can you program a key from off another Jeep?
@CliffsHowTo
2 жыл бұрын
I do not think you can do anything with one key, but a few people have commented that you can… I couldn’t find any information that said you can do anything with one key. If you find it, post it in the comments here!
@aztecwrrior1997
2 жыл бұрын
I ordered mine and they worked thanks man
@ribeiroz78
6 ай бұрын
After put the 2nd key, the red dot won't blinking. Do you know the reason? (My jeep is an european Jeep Wrangler Jk 2.8 CRD Diesel, manual).
@CliffsHowTo
6 ай бұрын
Not sure on that one.
@nightcat87
2 жыл бұрын
Cool man. Thanks bro. I'ma try this with my 05 Liberty.
@CliffsHowTo
2 жыл бұрын
I’m not sure this will work with a liberty… look in the owners manual. If you don’t have it, google the manual for your year/make. It will be listed under “sentry key”
@danny-bc2gs
2 жыл бұрын
Does anyone know where I can just buy the plastic part of the fob and just add my old key and chip system to it? Without having to use the key it’s sent with and just swap it out with mine. I bought one on Amazon and could not place my key in there.
@mrtopcat2
8 ай бұрын
My vehicles OEM key lists FCC-ID OHT692713AA. I bought a blank from a seller, who's site has listed the blank to be proper replacement to FCC-ID OHT692713AA, but with a different FCC-ID 2AOKM-CYV3, which I have received. I tried to program it following your instructions, but it does not work. Would you say seller is incorrect and the aforementioned 2x FCC-ID are not compatible?
@CliffsHowTo
8 ай бұрын
I am not familiar with the FCC-IDs of these keys. I’m not much help there! The keys I bought on Amazon say they work with key that have the following IDs: OHT692427AA and OHT692713AA. Based of what I’m hearing, maybe they sent you the wrong key?
@mrtopcat2
8 ай бұрын
@@CliffsHowTo Thank you for your reply. I have contacted the seller and seller stated that the key they sent was an aftermarket replacement for the OHT692713AA and has it’s own FCC-ID, which may have a different number. However in it’s response to me, seller did not go as far as saying that it was compatible. But in the advertisement seller clearly claimed that the key they are selling is OHT692713AA. So I sent them another message hoping they will do offer a solution to me. Maybe even a proper ID key. Fingers crossed.
@Sam-ti2po
Жыл бұрын
Idk why after I put the 2nd key the red dot won't blinking, do you have any clue why, or what should I do Thanking you in advance
@CliffsHowTo
Жыл бұрын
Not sure what’s going on.
@ribeiroz78
6 ай бұрын
I have the same problem. After put the 2nd key, the red dot won't blinking. Do you know the reason? (My jeep is an european Jeep Wrangler Jk 2.8 CRD Diesel, manual).
@legitg82
Жыл бұрын
What if you only have 1 original key and need to program the 2nd one?
@CliffsHowTo
Жыл бұрын
I’ve heard you can still do it somehow, but I do not know how. All instructions I could find said you need two keys to add more DIY.
@DDFUMBANKS
Жыл бұрын
Does it work if you have the engine light on??
@CliffsHowTo
Жыл бұрын
Not sure. You could try and let us know!
@l.a.m7645
Жыл бұрын
Does this work also if I have a remote start?
@CliffsHowTo
Жыл бұрын
I’m not sure on that one.
@asoecorp
Жыл бұрын
Is it possible to deactivate the immobilizer?
@CliffsHowTo
Жыл бұрын
Not sure in Jeep. On GM vehicles, you can use a module to bypass the VATS, or tune it out.
@MrJwc1234
Жыл бұрын
This worked great but my remote start didn’t work for some reason.
@CliffsHowTo
Жыл бұрын
Weird. Mine doesn’t have remote start, so I didn’t have that issue.
@gracecole7278
2 жыл бұрын
How do you program it if you only have one original key?
@CliffsHowTo
2 жыл бұрын
I don’t think you can, but someone down in the comments claims they did. I don’t know how. Maybe ask them?
@rebeccanaegle7457
2 жыл бұрын
I did it, I bought my key from a website toms key company. Go check out their youtube video of them programming with one key. It was pretty easy.
@markinoibarra1684
2 жыл бұрын
Work to jeep grand cherokee 2005
@robbingervais4885
2 жыл бұрын
Vendor did send me two new keys after the first two didn't work. That's why I had 4 keys to program.
@fatalstreet1650
2 жыл бұрын
No, I'm still confused 😐 lol, why do you need two keys?
@CliffsHowTo
2 жыл бұрын
Because that’s how they built the system. You have to have at least two “sentry keys”, to program more keys yourself.
@rebeccanaegle7457
2 жыл бұрын
You don’t have to have two. I did it with one. Just not like this
@geraldwatkins3543
2 жыл бұрын
@@rebeccanaegle7457 please explain your way. I only have one key.
@juanpantoja4605
2 жыл бұрын
@@rebeccanaegle7457 how you did it ?
@rebeccanaegle7457
2 жыл бұрын
@@geraldwatkins3543 I bought key from website toms key company. Go check out their youtube video of them programming with one key. It was pretty easy.
@attilacseh3406
2 жыл бұрын
My second key won't make the red dot on, so won't programm it
@CliffsHowTo
2 жыл бұрын
Awwww
@ribeiroz78
6 ай бұрын
I have the same problem. After put the 2nd key, the red dot won't blinking. Do you know the reason? (My jeep is an european Jeep Wrangler Jk 2.8 CRD Diesel, manual).
@MississippiWopGenius396
2 жыл бұрын
so what if you only have one original key lol
@CliffsHowTo
2 жыл бұрын
I’ve heard it can be done, but I’ve no idea how!
@smonroe36
2 жыл бұрын
Take keys to Ace Hardware
@CliffsHowTo
2 жыл бұрын
They wouldn’t do it.
@CliffsHowTo
2 жыл бұрын
They wouldn’t even cut the key.
@mystupidfacebook
3 жыл бұрын
how did you "talk" to them... Home Depot would not do it.
@CliffsHowTo
3 жыл бұрын
I went to one ace hardware, they wouldn’t do it. I went to another. They said they would do it, but would not offer any sort of warranty if they cut it. I agreed, and it was fine! I think it depends on who you talk to…
@AbleAbel
2 жыл бұрын
I went to Lowe's with the same type of Chrysler key and said I just wanted a copy to at least unlock the doors.... luckily my alarm didn't go off (06 liberty) and it worked then I went back in with a transponder chip only blank key and the fresh cut reg key with the barcode tag still on it and asked if they would just cut this too for me and he did!
Пікірлер: 81