In this video we will show you how to program your NICE ON2E gate remote control ! To order, click here : bit.do/remoteco...
- To program your remote on the reciever :
• You need your NICE ON2E remote control and the NICE OX2 reciever
• Press and hold down the programming button « P1 » on your receiver. The LED on the reciever flashes.
• Release the pressure.
• Press and hold down the button you wish to program. The LED turns off.
• Release the pressure.
• Wait for one second then press and hold down the same button you wish to program.
The LED on the reciever flasshes three times.
• Wait for 10 seconds
Your remote control is now programed.
- To program your new remote control with an already programmed remote (self-learning) :
• Take your already-programed remote control and the remote control you need to program.
• Press and hold down the button you wish to program for 5 seconds.
• Then, slowly press the already-programmed button three times on the old remote control and wait 1 second between each pressure.
• Finally, press and hold down the button you wish to program on the new remote control.
• Release the pressure. Wait for ten seconds.
Your remote control is now programed !
Feel free to leave a comment or to ask for help if you face any problems when programing your remote control. We will be happy to answer all your questions.
And don’t forget to give us a little blue thumb if you are satisfied with the video !
Remote control Express, the world within arm’s reach !
Негізгі бет Programming my remote NICE ON2E
Пікірлер: 20