*Nice to see you going back to the beginning!* *It's how Paintball should be played.*
@pinkyturner3125
4 жыл бұрын
I just got my 04 prostock back from SCC I had the ego necking done and put a CP clamping feedneck on. Well worth the money. Thanks Mike for showing us this.
@atreyustratula
6 жыл бұрын
Happy to see you around Mike! Your videos have always been very informative.. When i think of paintball your always the first figure that comes to mind. Hope to see you at living legends!
@heman101
6 жыл бұрын
Damn. I’m glad you busting out videos again Mike. Great to see more content from you again! 👍🏾
@wordtoyourmothership
6 жыл бұрын
Nice SSC getting some love. I've bought 2 guns off him that he chopped up and made insane.
@funkytruckermarkstre
6 жыл бұрын
Good to see you in front of the camera again Mike. Missing all of your paintball related videos, some of the best reviews of paintball gear there's ever been. PS, that autococker looks sick😍
@reignick1133
6 жыл бұрын
Glad to see Stanchy did great work on the feedneck ! I have several Autocockers I want to modify in this way ( All 3 summer special Prosrocks and an Oukast , all undrilled) that would definitely would be wonderful to finally have clamping feed necks on. My 04 is identical though purchased 1 piece at a time over a long period of time. Right now I am just about done with an oldschool "you don't see that anymore" right feed stocked Autococker build Bone stock no upgrades , slider trigger , aluminum/neoprene shroud built up to have all of the charm you don't see in modern markers and to be a fun self-imposed handicap. I have an original 1997 US made Viewloader Revolution in a Benchmark elbow on it to feed ( Every last part on the marker is US made, no exceptions!) , debating on an Allen paintball "turbo Loader" as to have an agitated loader with no reliance on batteries as the build is made for scenario play.
@GunFunZS
6 жыл бұрын
I love the stock regs on those. They are insanely stable and you can't screw it up. Set it where you want and adjust the velocity with the velocity adjuster. That's how you wand to cocker anyway.
@maximumslinky
6 жыл бұрын
I'm a simple man. I see Mike post a video, I hit the like.
@gsg_joe
6 жыл бұрын
Niiiiiiiice! Currently refurbing my 1997 right feed autococker . I'd also like to mod an 04 similar to this one. Great job.
@randomshmitter8852
6 жыл бұрын
i remember you always liking autocockers hope to see more videos
@virtual_balboa
6 жыл бұрын
05 Prostock is much sexier in my opinion. Love that Stanchy is getting some attention as well!
@jeremyplayspumppaintball9003
6 жыл бұрын
I own two of these and love em.
@wackyguns
6 жыл бұрын
Nice I have a red 04 prostock I might have to send mine out for that feed neck
@Ivanskis
6 жыл бұрын
Awesome video!!
@hpjoshua
6 жыл бұрын
man i regret selling my blue 04 prostock
@stillinkansas
6 жыл бұрын
Inception Technologies is serving up the thunder.
@83nukeem
6 жыл бұрын
id love to get a nice autococker again
@GunFunZS
6 жыл бұрын
I have like 25 of them. I knew they would be classics and picked up a bunch from other people following fads.
@pntdblack
6 жыл бұрын
You still playing paintball Mike? Man I still remember the good old MarkerBid days!
@JimBrodie
6 жыл бұрын
Got a halfblocked '04 Prostock project that's been sat for a couple of years. Only 20% complete unfortunately. Would have preferred the older wedge WGP body as the '04 seems a shame to halfblock but i took what was there at the time and it was well cut. At least it wasn't drilled for eyes...
@RED2K2TIMMY
6 жыл бұрын
I’ve been looking for a nice 03 autococker once it was my first marker but I’ll take a new 04
@TWEEK0423
4 жыл бұрын
Bro! I have a full stock 2004 all chrome one from when i was a kid i used it twice before it went into the box for 16 years. I wanna get it going again what do i need to buy and from where??? Probabaly only shot
@SkyfallLodge
6 жыл бұрын
I was told that you need an 800 psi regulator to run an autococker. This was after I went with a palmer low pressure (around 400) and started having problems.
@SlimPickens0
6 жыл бұрын
Not true. Maybe with a Trilogy Sport or another cocker that's sprung for high pressure. The Trilogy Sport comes with a gas-thru instead of a regulator, so its built to operate on that 800 psi coming straight from your tank. However, you can take that off, put a real reg on it, and get new softer springs for it that will allow it to run on lower pressures, thus making your regulator usable. Now once you start dropping below 350psi is where you start running the risk of pressures too low for an autococker to work.
@tejh140
6 жыл бұрын
I have the exact same 04 in black. It has been sitting in my garage for year, but still looks bramd new. I dont think i put a hopper through it... gassed it up today and nothing works... the ram.. nothing... any ideas??? Thanks...
@scottsanderson8855
6 жыл бұрын
Do a automag!
@filthymcnasty75
6 жыл бұрын
That not A valve adjusting tool it’s a valve removal tool and there’s nothing wrong with a WGP regulator , Azodin is taking a step backwards bud
@zzzBoneSzzz
6 жыл бұрын
Still have and use my 01 ANS autococker..
@diegoadame9634
3 жыл бұрын
Where did you get the front block
@cingram8168
6 жыл бұрын
Nice
@v3nomou545
4 жыл бұрын
How do you get that sound?
@wrestlemaniac202
6 жыл бұрын
Hey mike, I'm trying to rebuild my 2k+ vert fed autococker. What website should I go to for parts?
@Jsantos443
6 жыл бұрын
So the azodin reg is just plug and play or you need to turn in or out the pressure for it to run properly? I’m rebuilding a trilogy pro now and was considering this reg
@ashravenpb
6 жыл бұрын
its just like any other reg. Put it on the marker, bring its pressure output as low as it can go then slowly bring the pressure up until you are at the correct pressure
@Jsantos443
6 жыл бұрын
Ashraven PB if you don’t have a gauge on the asa then I’ll just be going off what then? Bolt stock issues? Or cycle issues?
@Floodbait_117
5 жыл бұрын
Lol I used a 1 in to threaded PVC fitting to let me use my spire 3
@carsonspung2528
6 жыл бұрын
How do you spell Paul's last name? Can't find him on facebook.
@jonthesniper2
6 жыл бұрын
I would definitely love to get one of these new if possible. If someone could shoot me a link to the guy who has them that would be awesome
@jonthesniper2
6 жыл бұрын
Or hell how to spell the guys name, would love to pick up another prostock
@fuegomilsim86
6 жыл бұрын
I'm wanting to get into the cocker game after 20 yrs of not playing. Can you make a video why the post 04 cockers are not good?
@reignick1133
6 жыл бұрын
The '04 represents the *entry level* Mechanical Autococker at the height of it's game, no upgrades needed as it was STO spec in all but 2 areas : the non externally adjustable HPR and the stovepipe feedneck . While entry level it had all of the nice internal / valve & spring related performance upgrades where it counts , bone stock from the factory. The '05 Prostock was quite good , but finding one which was undrilled /purely mech is *REALLY* hard to do as the majority of the '05 bodies were drilled to be "SuperStocks". Though none of the "SuperStock" '05 markers came equipped with Eclipse E1 or E2 boards they had the inferior "Worrframe" equipped. The 05's ALL use Evolution length bolts which is a *PAIN* if you plan on replacing the bolt. After that thin last trickle of '05 Prostocks there were no more good WGP Autocockers...It was the end of an era which lasted over a decade. It was the last Summer Special, the last WGP mechanical Autococker , and It was the last STO . *The '05 unlike the 2 other previous "Summer Special" Prostock markers of previous years is actually a direct continuation of the STO line of High end fully tuned form the factory Mechanical markers with ALL of the best features of the day / full upgrade package. In the same way the Outkast , Mechanical Orracle and the first Black Magic lines were. The STO or "Special Tournament Optimizations" Package markers were meant to compete with the *HIGH* end $1500+ custom shop built Autocockers Like Bullseye's Mammoth ,Colossal and Titan Autococker packages , Shocktech's "Westwood" , Kapp "Flame", Belsales "Evolution" P&P's "Super Cocker" , Wildside Paintball's "Wildfire" and Eclipse Nexus Mechanical Autocockers. The STO line was about offering that same high level of performance and high end tuning at a lower cost while sacrificing nothing , as WGP did not have to pay licensing fees for the bodies as they made all the blanks the custom shops used to make their high end marker in house . *The electronics packages in E-Cockers after WGP's spat with Eclipse in late '04 and later were rubbish* ( See the Autococker SR which was ergonomically excellent and while still new was great. The best of the non-Eclipse electronics packages ,ALL of the Autococker SR's have a *horrible* flaw : Every single last Tadao board in them will eventually die and die NASTY. The boards and their screen are irreplaceable. ) and the simplified Trilogy line while not bad were made overseas , needed an adjustable trigger rod and a better set of HPR and LPR and the frames were middling at best. Once they fell out of correct timing getting them back in time is a right headache. But even the worst Trilogy can be made better...Via aftermarket parts not like the Worr Machines and other regrettable markers WGP under Jarden Co. ( Later KEE Action Sports) was rolling out *NONE of which were developed in house by WGP or by Budd or Jeff Orr.* Those were utter garbage. By this time Jarden /KEE pretty much looked for a reason to kill WGP as a brand. After the failure of the rebranded Air Challenger markers sold under the WGP and the decline in sales of the Trilogy Autococker line they had found it . In 2008 Jarden/Kee had closed ALL WGP operations and facilities.
@SlimPickens0
6 жыл бұрын
Fuego Milsim They are good. If its a WGP cocker, its a good cocker. The 2k5s were made overseas yes, but they still have the same great pneumatics, same valve, threaded feedneck right from the factory. WGP Ergo/Black Magic/Karnivor regulators are the same internally, and are great, better than the Azodin if you ask me. Now after 2k5 is when we start talking about the Trilogy. The Trilogy gets a bad rap because it was very different. The integrated, non-adjustable 3way so you cant adjust your trigger pull without a TechT kit. The LPR is threaded differently, so you need either a Palmers Trilogy Rock or get an adapter nut from TechT if you want to change your LPR. And then theres the best part of the Trilogy, the 11/16" valve. They switched from the standard 9/16" valve. All new cockers coming out today, Empire, Inception, Meteor, and Shocktech, all use that 11/16" valve, so clearly WGP got that right.
@fuegomilsim86
6 жыл бұрын
TJ Jahn my other question: is it better to get an inception design cocker or an OG one. Are inception design cockers far superior than these or are they just as good? Because at the end of the day if I buy an older one I will be basically spending the same amount of money as I would buying an empire resurrection. What are your thoughts?
@SlimPickens0
6 жыл бұрын
Fuego Milsim the Resurrection is a great cocker. The Inception Designs are going to be the best quality for a complete build from the factory. Theres absolutely nothing wrong with the older models. I have an 05 i had rebuilt and tuned, and i love it. Any cocker with the 11/16 valve is going to be able to run lower pressures and be smoother and more efficient. At the end of the day, what are you looking to spend? Cheaper, get a Trilogy Pro, it has that same hinge frame that Mike has here, it has a true regulator, not a gas-thru, and its going to be a plug and play, no need to tinker it unless somethings broken, and the feedneck should fit a Revvy loader just fine. Resurrection will be nicer, has a great barrel kit, itll be smoother and you can time it to your liking. Its a slider, so you might prefer the slider over the hinge, or vice versa. I really wouldnt suggest spending more than $400 on a cocker if you dont know what youre getting into yet. Start cheap, learn how it works, how it feels to you, and then when you know exactly what you want, go ahead and get it or build it yourself.
@screws1012
6 жыл бұрын
More vids!
@AdrenalineJunkieXL
6 жыл бұрын
I assume you did sweet spot the reg? Lol
@mexcanjr1988
6 жыл бұрын
Drones is the way to go ... XD
@tejh140
6 жыл бұрын
I have the same one on my garage... it leaks if anyone knows how to fix it..
@tejh140
6 жыл бұрын
Its got to be re-timed and everything
@sbower
6 жыл бұрын
i'd also check the front block hoses, probably time to replace those too
@chilIychilI
6 жыл бұрын
He said Smart parts? *say what* ? Lol.
@chilIychilI
6 жыл бұрын
Back when the Smart parts ion was the house hold, youtube/pb starter gun, most guys that had been around for a while, like Mike, hated smart parts. They were like the big evil empire that sabatoged their own boards so we couldn't upgrade them.
Пікірлер: 60