You should snag some electrical numbers for wires. You just wrap each wire on both sides with the matching numbers and then it's a no brainer when disconnecting and reconnecting wires. It's all about the dimple lol. Lookin good my dude!
@freefree2021
11 ай бұрын
I'll take a look, I'm always lookin for the easier solutions.
@rickguglielmone2336
7 ай бұрын
Excellent video ! Appreciate
@teddd2009
7 ай бұрын
Great walkthrough! I've been wanting to do the ground fix and desmog for a while. Was not aware of the left screw on the solenoid for the ground fix. For the desmog, I'd like to know if your VTX-1800 now no longer pops on decel. I have high hopes. The popping is really annoying. Oh, and I will install the fuel quick disconnect. Thank you for the video!
@freefree2021
7 ай бұрын
No more os on decel, be sure to also replace the brass crush washers and re-torque the exhaust bolts, they often shake lose and will cause popping also.
@phatpac5
Ай бұрын
have you had to reseal the rear head cover yet? mine has a small leak and i know Honda says to remove the engine in order to do it but im not trying to do all that lol
@freefree2021
Ай бұрын
No seals are good so far. It definitely looks like there's room to do it without removing the engine, especially if you've already done the desmog.
@ReeeeeToaded
3 ай бұрын
"I love red rum" you mean Burgundy?
@rickguglielmone2336
7 ай бұрын
Can you provide the web or part number of the cover plates ?
@freefree2021
7 ай бұрын
I mention it at 12:26 Goheen cycles
@travisfischer2607
Ай бұрын
Great information! I’ve got a 2003 VTX 1800 that makes a weird vacuumy rattling sound under, or inside the gas tank at 1500 to 1900 RPM’s. Above 1900 RPM’s the sound goes away and it runs perfect. Idles perfect too. Any ideas??
@freefree2021
20 күн бұрын
I would remove the tan and check all lines , could just be the chrome tank cover, the front sometimes rattle.
@caseyburke9553
3 ай бұрын
He kept calling them solenoids they arent solenoids they are ignition coils
@user-rd7dy2yb3r
4 ай бұрын
i need advice i have the same bike but mines bogg down after about 5-10 min of riding
@freefree2021
4 ай бұрын
That's a tough one, I would start with the basics Fuel, Spark and Air. Fresh plugs, new gas, clean intake. From there check exhaust bolts, they work loose. It's likely you will find the issue somewhere in this process. Good Luck!
@fairplayer916
5 ай бұрын
what kinda fuel economy do you get out of your bike?
@freefree2021
5 ай бұрын
Funny you ask, I've been doin some diagnosis because I've done the desmog and ground fix and still getting only 100 miles per tank. I found that my fi2000 is set higher than necessary, hopefully this will get me some more miles.
@kenalvarado8993
2 ай бұрын
Do u have links to items used
@freefree2021
2 ай бұрын
The blockoff plates for the desmog are at Goheencycles.com under pair valves, definitely get the dimpled plates! Other than that, i used a screwdriver and sandpaper for the main ground.
Пікірлер: 19