My man dropped a true gem it really works too I’ve done this a few times over the years. Keep them joints cummin fam.
@frankwhite2719
3 жыл бұрын
Preciate the love bro
@i39s67
3 жыл бұрын
yo do they id you for buying these ?
@fiys567
2 жыл бұрын
@@i39s67 naw but you dumb for asking online lol. it’s just a box with a spring
@mfngaming5630
7 ай бұрын
6 out of 6 ProMag xdm 45acp 25rd extendos failed. Thanks to this video Promag is sending me 6 more mags free of which I will break down into 6 double springed promags for my 45 with 6 additional mags w/o springs. All for the original price. Solved them jamming problem with no money spent and parts to spare Nice!
@postsniper-7532
2 жыл бұрын
Your the goat I did a 460 Rowland conversion on my .45 Fnx tactical that requires a stronger spring already but wanted to keep my 20 rd pro mag now I’ll just double the stronger spring
@wardatkins1320
3 жыл бұрын
Thanks Frank White " I had to watch this like ten times " one time in slow motion 😂 just to make sure I was doing it right . Thanks you just got a new subscriber "
@frankwhite2719
3 жыл бұрын
Appreciate you bro
@wardatkins1320
3 жыл бұрын
@@frankwhite2719 man I'm like a kid with a new toy I been messing with this thang ever since " your video was a big help "
@oneday3857
Жыл бұрын
So what springs did he use
@raiderswish
3 жыл бұрын
Your the man! This tramendo, I can finally use the promag it goes to two weapons. Saved the day.
@ElCineHefe
3 жыл бұрын
Thanks! I didn't know you could save those crappy promags.
@davewebster5120
2 жыл бұрын
Broooo! Nobody else makes 'stendos for my cz and i thought i'd have to weld some together. Very nice.
@unclejohnsvlogs
14 сағат бұрын
Thank you bro! Was about to throw my glock 21 sgm mags in the trash!
@Petryfied
3 жыл бұрын
Just picked a 32 rounder for my Taurus g2c 9mm. Some say to wrap a couple layers of black tape around the top towards the bottom of the mag well,on the magazine. Or to buy double springs or just use a Glock 33 round mag and cut a link off if needed. Thanks for sharing brotha
@frankwhite2719
3 жыл бұрын
No prob my guy...did your extendo come with the mag sleeve?
@Petryfied
3 жыл бұрын
Frank White yessir! It did but I think it’s ugly tbh. I even painted it FDE (tactical tan) and it helped with looks a lil bit lol I painted the bottom base plate of the mag to match the sleeve
@Mr_Originality
3 жыл бұрын
@@frankwhite2719 im tryin to find a mag sleeve. I got sgm 31 rd 40 mag
@seanrawlinson8565
2 жыл бұрын
Nice. Just got mine in the mail for my XD mod.2 today. And I could feel that the spring is not as strong as my regular Springfield mags. Good looking out!! You have my subscription.
@achillesiq491
2 жыл бұрын
The mags may work good at first, but 160 rds later the springs give out. This happened to me on two new mags at the same round counts for my sig p320 compact...switched to some old after market 33 rd glock mags (those springs had more tension and thicker springs), snipped them down to size and it was harder to get all 15 rds than the original springs, but worked flawless.
@WhiteDemon23PR
Жыл бұрын
Thanks, I bought the 32 mag for the taurus g3c, and I hate when the bullets shake. I'm going to buy another spring. Thanks for the tips💯🔥
@philliple288
10 ай бұрын
Where you buy spring for promag ?? let me know a web thanks
@BrewCityRider
2 жыл бұрын
Thanks for showing this as I did not know that was a thing. Good job!
@alexgee977
3 жыл бұрын
Waiting on my extendo clip from pro mag now. I asked them to include extra springs in the order comments, so fingers crossed that they actually did that for me lol. Nice vid fam, thanks!
@sbthatkid8717
3 жыл бұрын
Those factory promags will have you killed, def double the springs if you can. But its better to just stay away from the promags
@elche1976
3 жыл бұрын
Did they send the extra springs in the order?
@teelowteelow356
3 жыл бұрын
@@sbthatkid8717 any knowledgeable gun owner should know you can use promags, but on the range only
@bosafrmdamob1672
2 жыл бұрын
Did they ever send the extra spring
@alexgee977
2 жыл бұрын
@@bosafrmdamob1672 nope lol smh
@jensenharmon5454
3 жыл бұрын
Hey real talk...I have a Taurus g2 pt111. I have 3 pro mags...no issues at all. No one jam, misfire, failure to extract. Nothing. Flawless.
@sterlingmack5394
2 жыл бұрын
32 round?
@achillesiq491
2 жыл бұрын
I had two new mags for my sig p320 compact (15rd), no problem, but one had a rattle...160 rds later both mag springs weaken at the same time, bullets would load downwards, etc. Switched out the springs to a much thicker ones and loading was harder about the last 2 rds, but back in business. So, best if people store/shoot their ProMag fully loaded at least 10 to 11 times and see how they hold up.
@RedCivic0321
Жыл бұрын
Love the video quick and to the point.
@workinmanworkinman3889
8 ай бұрын
Thanks for the info Bro. I’m in the process of ordering two so now I’ll just order one ,and if it does not perform, I will take your advice and order another wolf spring for it. Thank you…..
@beazy57
3 жыл бұрын
I don't double the springs I just buy Wolff extra power springs they like a little over 7 bucks
@rangoloko1010
2 жыл бұрын
Does the wolff spring for glock mag fits the pro mag ?
@beazy57
2 жыл бұрын
@@rangoloko1010 they fit all there glock style mags
@rangoloko1010
2 жыл бұрын
@@beazy57 but does it fit the Promax for the g3 taurus
@rangoloko1010
2 жыл бұрын
@@beazy57 I got 3 extra 5% extra strength wolff springs was wondering if I could use it in the g3 taurus promag 32 extended
@beazy57
2 жыл бұрын
@@rangoloko1010 that I don't know I've only used them in glocks I don't own any taurus firearms its a double stack mag try it out !nd let me know
@robertlabastida7332
Жыл бұрын
Thank you sir! Going to do this to my new m&p 9 mags.
@DP-zf5kh
Жыл бұрын
did you call promag and ask them to give mail you the free springs?
@bryanrsingh3359
3 жыл бұрын
Damn good looking out bro. I thought I just got a bad mag.
@kors_to_mars1999
2 жыл бұрын
Same tested it out a lot I keep getting Failure to feed might have to order a spring
@bryanrsingh3359
2 жыл бұрын
@@kors_to_mars1999 It ended up being my ammo.
@3shichriss
5 ай бұрын
Where can I buy a springs from
@blackicekck9family379
Жыл бұрын
If you have a 27 pro mag for Glock cut the spring in half double the bottom that would work to 4:44
@tq2435
3 жыл бұрын
So basically what makes on brand factory mags so superior is that they just have stronger springs causing them to have ZERO jams?
@frankwhite2719
3 жыл бұрын
Definitely bro idk why aftermarket mags just don’t have stronger springs
@deucedeuce1572
2 жыл бұрын
@@frankwhite2719 Probably wouldn't even cost them anymore money either. (to use stronger springs to make aftermarket magazines).
@basidan4488
2 жыл бұрын
Will this work for sd40ve pro mag
@joshhungry3958
2 жыл бұрын
Just double my sw40ve springs haven’t shot it but I’m gone take it to the range this weekend
@waitwhat1052
3 жыл бұрын
This is the first time I've ever seen this.
@bluedownC
3 жыл бұрын
I got one for my SD40VE and the spring was really weak. It kept failing to push the next round up to chamber. I got a Wolff Mag Spring for a Glock 33rd mag and replaced the promag spring and it kept failing to push the next round up I'm assuming the Glock 33rd mag spring is too short compare to the promag one. So I double up the spring using the Glock 33rd mag spring and the promag spring and so far the 25rd mag for the SD40VE has worked flawlessly. However, to not over pressure the springs I only load 20rds instead of 25rds.
@ontheflipsideedc
3 жыл бұрын
Should’ve got the 22 rd .40 Wolff spring
@bluedownC
3 жыл бұрын
@@ontheflipsideedc According to the website, the Wolff Mag Spring for the Glock 33rd mag can be use for the Glock 22rd .40 mag as well.
@Dylan-oc1rc
23 күн бұрын
My mag keeps dropping lower a little keeping the next round from going in i have to bump the bottom to make the next round chamber how do i fix this
@vibelikegino
2 жыл бұрын
Where do i buy the extra spring for the promag 25 round .40 s&w??? I cant find it🤦🏽♂️
@lawrencee486
Жыл бұрын
What Wolff spring do I need for the 20 round Pro Mag? TIA
@holdentudix3830
Ай бұрын
Shit man,I like it !!!👍
@trustdaplan
Жыл бұрын
Man this works but now you'll need a loader kuz your not gonna be able to load your clip regular🤦🏾♂️🤦🏾♂️🤦🏾♂️
@mattdean780
2 жыл бұрын
We're did you get the other spring from bro bro
@forcecalibration924
Жыл бұрын
Good looking cuzn my came flying out n tryna figure out how to make dat bih more sturdy
@streetfightinc
2 жыл бұрын
You the man bro
@5five6x45
2 жыл бұрын
hell yea great info
@yeshualawson
3 жыл бұрын
Man I've been having issues with the promag mka 1919 shotgun mags. Maybe this will fix it. I'll try it. Easy fix
@yonathansadikin7010
3 жыл бұрын
awesome tip!
@120FOV_DIRTY
3 жыл бұрын
Learn somethin new everyday
@Reeltali
Ай бұрын
If i get a wolf spring, do I double it with factory promag spring?
@SIX4TALL
2 жыл бұрын
I only used mines twice first time 34rnds failed at 25rnds than 32rnds flawless so I left it loaded for a few months and tried to fire some rounds out it failed both times failure to feed the ammo was launching downward in the mag
@DatBoyPhilthy
2 жыл бұрын
I just bought a 32rd promag but I need to double the springs I have a 15rd promag and wondered if I could use the 15rd mag spring to double on the 32rd mag spring ? Would it work ? Edit: I put the 15rd promag spring along with the 32rd promag spring now my mag holds 30 and shoots every round but when I run hollow points I have failure to feed running that type of ammo.
@marvinparker7872
2 жыл бұрын
🤦🏼♂️
@DP-zf5kh
Жыл бұрын
sholy go have this in mind💯
@juicydieseljd6687
3 жыл бұрын
Good looking bruh
@cheeseburgero1
3 жыл бұрын
just checked my pro mag springs after 10 years they kept the spring but finally snapped i would heat treat the springs and dip in oil
@boodillacp522
3 жыл бұрын
I just got a Promag from Cheaperthandirt for my S&W sd40ve and it jammed after the 2nd shot. Ima try this once I find a spring🙏🏼
@rickyswb2004
3 жыл бұрын
Tell me how it go
@quarderiousjordan2892
2 жыл бұрын
Mann thank u I thought I fucced my mag up on my S&W SD9
@kennybHoldin
3 жыл бұрын
Where do you order your extra springs from please drop a website
@Hashslingingslashr
3 жыл бұрын
Call promag customer service ask for extra springs
@tacktiician4978
3 жыл бұрын
Am in the middle of loading this double spring pro mag. Man my thumbs hurt lmao
@user-zj1nj7tc3d
3 жыл бұрын
Yea brotha i couldnt even get 32 in. Stopped at 28
@tacktiician4978
3 жыл бұрын
@@user-zj1nj7tc3d bro fuck that. I gave up on that shit. Honestly pure garbage mags. I got wolff glock springs and those helped alot but the mag still didnt sit correctly and would jam up after a few rounds usually
@tacktiician4978
3 жыл бұрын
@@user-zj1nj7tc3d I went out and got myself a glock 19x so ill just buy a glock factory extended for it
@user-zj1nj7tc3d
3 жыл бұрын
@@tacktiician4978 Yea double spring didnt even do the trick. Ive bought four of them and ever time they are trash!
@tacktiician4978
3 жыл бұрын
@@user-zj1nj7tc3d crazy!
@Vladthemane
3 жыл бұрын
Anyone have a link to this spring?
@tq2435
3 жыл бұрын
I usually just get 2 mags. And take one out and put them into one
@frankwhite2719
3 жыл бұрын
Yea I did that a few times but then I would just call promag and let them know the mags were defective
@mikymiky412
7 ай бұрын
First Frank White video I've viewed. I'm underwhelmed. He doesn't say specifically where to get the extra spring (Wolf doesn't sell promag springs), nor has he responded to questions about that below. I suspect he got the spring from an identical Promag which would double the cost and defeat the purpose of buying ProMags.
@chalfrmthaeast
Жыл бұрын
Aye @frank white how the mag holding up just bout one
@pikaso7923
Жыл бұрын
Bad ass vid
@naturalstone5708
Жыл бұрын
I have a XDM 40 going to order the 25 Rd but took a look around for peoples comments and I'm here. Where did you purchase the other spring and how did you search for it.
@hollowvision
3 жыл бұрын
Thanks finna try this out I went to the range one time with pro mag s&w sd40ve 25 rnd mag Jammed after every shot just got another clip gonna double springs and try again at the range soon
@hollowvision
3 жыл бұрын
IT WORKEDDD THANKS OMG SAVED ME ON CHANGING MY GUN FOR TOP EXTENDO. Now my SD40Ve works perfect with th extended mag. It said sd40ve worked with pro mag but then on website says incompatible now I forced it to work and it runs flawless because of you hope this gets a million views 🔥
@frankwhite2719
3 жыл бұрын
🙏....highly appreciated bro glad I could be a help
@hollowvision
3 жыл бұрын
@@frankwhite2719 thanks I had a ball at the range last night a whole 26 shots pretty much flawless all because of you🔥💯💨❤️
@naturalnaturesounds333
3 жыл бұрын
I gotta SW40VE what kind of wolff spring did you get
@hollowvision
3 жыл бұрын
@@naturalnaturesounds333 just buy the clip again and take the spring out and merge it with the new clip
@treylockett1018
2 жыл бұрын
preciate it bro!!!!!
@louis_ellis.2410
Жыл бұрын
Hi I bought the 32round mag for my czp10c, it fits perfectly but struggle to chamber round, I have to give the slide a boost, do u think it could be the spring? Sorry I'm a first gun owner🙈
@mikey.2687
3 жыл бұрын
Can I use a glock 22 22 round oem mag spring? I took it out and the 22 rd spring seems longer than a 31 rd kci mag I got.
@philliple288
10 ай бұрын
Where can I buy spring for promag ???? let me know thanks
@jalentorres4824
2 жыл бұрын
What if it’s a 9mm pro mag and Im trynna double that spring in my s&w pro 40
@MrLuhbat49
3 жыл бұрын
What is the name of that tool you use to get the spring out the magazine ?
@frankwhite2719
3 жыл бұрын
I used a small screwdriver or if u can find something small pointy object to push it down
@120FOV_DIRTY
3 жыл бұрын
Can I just buy two pro mags and take the spring out the other and put both into one mag? Will cost more but can’t wait on them to send one lol
@frankwhite2719
3 жыл бұрын
Yes u can
@120FOV_DIRTY
3 жыл бұрын
@@frankwhite2719 thank you brother!
@DoctorLazertron
2 жыл бұрын
Thanks m8
@chiraqgunreviews
3 жыл бұрын
All facts
@Black-ji6xl
Жыл бұрын
What is the tool called to open it where can i get it?
@miguelduenas1146
3 жыл бұрын
spring for 32 rounds magazine sig sauer p365 where i get it
@mikey.2687
3 жыл бұрын
I did this with my ets 30 round and it solves the problem. Can I store them loaded double springed?
@big30onme10
3 жыл бұрын
I haven't had no problems with my 31 round ETS magazine for my Glock 19 never jammed on me once talking to the gun range shot 300 rounds out of it works perfect
@mikey.2687
3 жыл бұрын
@@big30onme10 mines jammed on my g22 but after I double springed it. No problems after.
@JalenJo3
3 жыл бұрын
@@mikey.2687 still no problems after u doubled them?
@mikey.2687
3 жыл бұрын
@@JalenJo3 after i doubled worked good only thing it took about 26 or 27 instead of full 30
@LesDeplorables
2 жыл бұрын
@@big30onme10 same here
@509hunter9
3 жыл бұрын
Can I just use a 33 glock mag spring on my 25 rounder xd magazine? Please respond I need help I'm lacking!!!
@frankwhite2719
3 жыл бұрын
I’ve seen ppl do it long as it’s same caliber mag
@509hunter9
3 жыл бұрын
@@frankwhite2719 dose it have to be factory glock mag spring? Or can I use sgm tactical?
@alliyah948
2 жыл бұрын
What spring do I order if I have xdm 40
@dee2shiesty215
2 жыл бұрын
Do this fix jams ?
@175juu6
2 жыл бұрын
So do i just buy a glock magazine take the spring out and put the spring in with the other one that’s already in my mag?
@175juu6
2 жыл бұрын
Or can i just buy the spring by its self
@sterlingmack5394
2 жыл бұрын
Just buy factory mags that r meant for the pistol
@lesteraddison4638
2 жыл бұрын
Seems to me promag needs to make better quality springs. Why buy it if you gotta do modification like this
@chalfrmthaeast
2 жыл бұрын
Cause they the only dickheads that make extendos for every gun😂
@crazyorwhat
3 жыл бұрын
Was it harder to load?
@taureanbarksdale229
2 жыл бұрын
I’m going to lie I try to do this in my Canik , I had a double feeding problem.
@jasonjones717
3 жыл бұрын
Will a glock 33RD mag spring fit in the pro mag? if not what spring do i need?
@frankwhite2719
3 жыл бұрын
Yes it’ll fit may change capacity on the mag by a few rounds tho
@thatguy3530
3 жыл бұрын
Can I use a spring out of a 9mm mag to put in the 40 mag there both extended
@chalfrmthaeast
2 жыл бұрын
Yessir
@joshhungry3958
2 жыл бұрын
Anybody had problems with their promag with the double spring ?
@NOLAZER
2 жыл бұрын
how has the spring been holdin up? does it feed reliably?
@jaelenwhite564
2 жыл бұрын
I’m about to order one. Does the mag fit the 45 XDS ? Or just XD?
@ThatNoFbody-ch9ky
8 ай бұрын
Only xd lol xds is single stack bro
@sellslogan2
3 жыл бұрын
you know where i can get a extra spring for my s&w sd9ve i just got a pro mag 32rd extended magazine and i wanna make sure it doesn’t jam on me
@frankwhite2719
3 жыл бұрын
I usually go to promag customer service first.if I can’t reach them I check www.brownells.com but most places are sold out of springs at the moment
@frankwhite2719
3 жыл бұрын
Promag customer service or www.brownells.com most places are sold out of springs rite now
@sellslogan2
3 жыл бұрын
@@frankwhite2719 do you know what type of spring i would need like the name nd everything? or should i just hit them up?
@AlexshredsMIA
3 жыл бұрын
Where can I get the spring for the pro mag p365 32 round??
@frankwhite2719
3 жыл бұрын
I usually call or email promag industries if i have to get springs....I been looking for one for the 365 can’t find one so I’ll probably have to try promag
@cshottas8151
3 жыл бұрын
U from Cali ?
@SiiKaRiiOxXx
3 жыл бұрын
Where did you get the spring
@frankwhite2719
3 жыл бұрын
I got the springs from diff places most of them came from promag customer service others came from brownells.com and glockstore.com
@AutomaticAttention
3 жыл бұрын
Ya vids are accurate & helpful fasure but how did u go about getting the springs for free?Like did u call tech support or email pro mag?
@frankwhite2719
3 жыл бұрын
I called tech support
@AutomaticAttention
3 жыл бұрын
@@frankwhite2719 i did dat early dis morning i forgot to say sum but gl🤝
@AutomaticAttention
3 жыл бұрын
I gotta m&p 40, used in good condition,what strap should u recommend i get nxt doe?
@frankwhite2719
3 жыл бұрын
The m&p is a dope piece...All depends bro if u wanted another handgun I would go with glock xd maybe fn or hk all depending on how much u wanna spend but if not handgun I’d probably pick a budget ar pistol or ak pistol
@AutomaticAttention
3 жыл бұрын
@@frankwhite2719 appreciate it my guy.Looking foward to sum more decent content & learning more bout more shxt.
@jamesmcglone6109
3 жыл бұрын
PRO MAGS ARE JUNK, I JUST BOUGHT ONE TOOK IT TO THE RANGE ITS JUNK JUNK !!!!!!!!!!THE 18 ROUNDERS
@jamesmcglone6109
3 жыл бұрын
THERE ARE TO MANY PEOPLE OUT HERE SELLING JUNK, BUYER BEWARE.
@turntup2damax1
3 жыл бұрын
Can you drop the link for that spring ? I can’t find it anywhere
@frankwhite2719
3 жыл бұрын
I usually go on brownells.com for replacements or when I need double the springs I call promag industries tech support and ask for new springs for whichever mag is giving me issues
@psyatic2851
3 жыл бұрын
@@frankwhite2719 do they send you more springs for free and where would I be able to find it on brownells?
@naturalnaturesounds333
3 жыл бұрын
What spring will work for SW40VE ??
@frankwhite2719
3 жыл бұрын
I doubled up my promag springs for that mag
@frankwhite2719
3 жыл бұрын
But u can buy wolf springs there most reliable
@gamingwithttk9438
3 жыл бұрын
Where you buy springs from
@frankwhite2719
3 жыл бұрын
I bought a few from midwayusa.com and I got A few from promagindustries.com but if you google wolff magazine springs you will find numerous places to buy
@elche1976
3 жыл бұрын
@@frankwhite2719 does ProMag ever respond? You can't really leave messages now so only email. I bought two and 1 doesn't feed a I'm trying to double up the springs. Their customer service availability is very discouraging.
@mariogonzalez673
2 жыл бұрын
5% or 10%
@calholli
2 жыл бұрын
yeah... no
@JonathanRodriguez-bn6rm
3 жыл бұрын
Has your promags ever jammed on you??
@frankwhite2719
3 жыл бұрын
Yessirrr most of them have been good but I’ve had a few jam on me after a few runs...but especially the ones I have in 45 acp I guess the bullets are so heavy I had to double the springs
@JonathanRodriguez-bn6rm
3 жыл бұрын
@@frankwhite2719 does it permanently fix the problem? I just got a pro mag for my xd9 4.0 mod 2 and I requested for an extra spring.
@i39s67
3 жыл бұрын
@@JonathanRodriguez-bn6rm do you have to do a background check or show gun license when they deliver it?
@JalenJo3
3 жыл бұрын
@@frankwhite2719 even after u doubled them they still jammed?
@Mr_Originality
3 жыл бұрын
Dude sound like G herbo
@frankwhite2719
3 жыл бұрын
😂😂😂
@DP-zf5kh
Жыл бұрын
do you call or email promag?
@Thr3zZy
3 жыл бұрын
Yo
@aaron777glock
3 жыл бұрын
Does the glock 22 round 40 mags work with 357 sig?
@frankwhite2719
3 жыл бұрын
I’m not sure bro but I know 357 sig bullets will load in the magazine just fine not sure about functionality in the barrel tho
@g-man9743
3 жыл бұрын
@@frankwhite2719 all they have to do is change the barrel to a .357 barrel
@frankwhite2719
3 жыл бұрын
That’s true I meant to say I’m not sure about the functionality in the .357 sig barrel... I’ve heard that the 40 will work in the 357 mags but 357 will have issues in the 40 mags for the glock brands...I’ve never had issues out of my m&p when doing this
Пікірлер: 202