Haven't been watching for a while! I'm retired now and don't have time to watch videos! Good Job on the windshield! Actually, I'v been working on the house! Cheer up, my Brother just did the same thing you did, he got out, left it in neutral, took the gas cans off the back of the truck and put them in his woodshed, turned around, and the truck was gone, went down the hill about 500 ft, and ran right into a tree, good thing the tree was there because it could have crossed the road, over the bank, into the creek!
@johnt7232
7 ай бұрын
The guys you wanted to fit the windscreen probably wouldnt have a clue how to fit that older style , everything is just glued on nowadays , so that's a feather in your cap , I have done cars myself back in the 70's/80's self taught like yourself so well done Chris
@ekhultan5669
7 ай бұрын
Love this long videos! Can't wait to see u run it again 🙂
@johnsandell4501
7 ай бұрын
Thanks for taking us along your Wrenching Warrior tour. Amazed at what you go learn to complete a task. Smart !!!
@billkroczyk3749
7 ай бұрын
On your window you should use straight Dawn dish soap when I used to run Wrecker that's how I was getting cars on the Wrecker with broken ball joints of tire rods slide right up on there like no problem
@phillipdickinson8557
7 ай бұрын
That was great Chris thank you for sharing and your time was really great never miss a video and can't wait for next video thank you
@jamesgray8123
7 ай бұрын
Truck looks great great job, hopefully soon you'll do another video on finishing the old John Deere riding mower
@adamprost-zu9ch
7 ай бұрын
The truck is slowly coming together I can't wait to see you have it done
@toddlowery1738
7 ай бұрын
Great video Chris. She's looking good . Can't wait to you trucking with it .
@jeffmcbride469
7 ай бұрын
Windshield looks great!
@billcarbomb6140
7 ай бұрын
YANKO❤wow I just have to say it you do a great job of explaining why how and no shenanigans it’s a pleasure to watch it’s like the good bad ugly lmao Norman is looking great hope you have a barbecue and invite us to have fun fun fun PEACE
@PjMcCarthy-p5v
7 ай бұрын
Love the longer video's thank you please keep it up there great
@dennisbelles9236
7 ай бұрын
Great progress.
@j4y_m1n3r8
7 ай бұрын
Dam looking at that muffler made wanna hear it straight pipe
@nealfry7403
7 ай бұрын
Glad to see things starting to fall into place for you Duffy.
@dalecarr2485
7 ай бұрын
Hey Chris, You have to use the threaded bar to bolt in the lower frame of the PS mirror. If you use nuts you won’t be able to tighten the bolts unless you remove the glass to get a wrench on the nuts.
@jimkavalier2831
7 ай бұрын
Getting closer..... 👍
@waynejones5239
7 ай бұрын
Nice video
@kevinkevlar8050
7 ай бұрын
It’s common it does take time but it will be worth it. She’ll be a whole new girl for you Chris. I hope you have a good year with her and don’t leave it in fucking neutral again lol but if you do you’ll know just how to fix it and where to get the parts, let’s hope that doesn’t happen. Keep up the videos and I love the headgear and yes, some angles aren’t great but overall it’s much better while watching you work with two hands that irritates me more sometimes lol have a great one. I just got laid off of these days. I might send you a email to see if I could stop by and say hello. Give you a hand for a day shoot the shit been there done that and oh yeah still doing it. I have a little farm myself in Massachusetts , Charlton Massachusetts but anyway keep it up. love your videos and your enthusiasm some days I could certainly use yours
@scottberger4196
7 ай бұрын
Duffy glass and windows service the new business lol
@joeblair1532
7 ай бұрын
Keep it up Duffy. Luv ys
@Wayfarer001
7 ай бұрын
Welcome to the 2024 season of struggling with Duffy ag
@Wayfarer001
7 ай бұрын
Now why in the hell did you not put painters tape on the bottom of the mirror mount area,then start a bolt at the TOP of the damn door?
@scottfoster6576
7 ай бұрын
You always working circle s
@davet.3587
7 ай бұрын
If i won the lottery I'd keep farming till it was all gone
@paulchurchuk
7 ай бұрын
Chris, next time tilt ya camera down Half inch lol can't see much as half of what you're doing is under the camera 😅. But trucks looking great 👍 ❤
@staffordfarms6974
7 ай бұрын
Need to put an inline disconnect on the mack when you get out for the day or its gonna be sitting for awhile simply flip the disconnect and no more dead batterys
@peteparker7396
7 ай бұрын
You don’t have to start it! You put a quick connect on your air tank and fill it with your air compressor.
@ghostunspeakable7866
7 ай бұрын
#duffyglassrepair #duffyglass4thatazz
@bobberg7391
7 ай бұрын
Will a exhaust pipe reducer fit between the crome cap and air cleaner, a muffer shop depending of size difference can expand a piece of pipe to fit both? Paint it black noone will know
@jeffreydixon8796
7 ай бұрын
Where did you get that tool from for the windshield great video thanks
@willianvos3521
7 ай бұрын
You should upload a 10min unedited video. Then we will all know how much time you lose a day
@williamhawks2372
7 ай бұрын
There is a company company that do the glass for the max trucks special that DOT trucks my friend used to do it, but now he’s maybe working for his father. I do not know where that don’t make no sense if state DOT can find someone to do it you should too find someone
@patrickosullivan4021
7 ай бұрын
Run her now for a while, & when you can afford it swap it for something fresher Duffy 😊
@NARCISSISTICNICK1
7 ай бұрын
Ol stuffy nose Duffy is saying "To be honest" a lot lately. Like there's another option besides.
@rens1794
7 ай бұрын
hey just a question.. if you are done done with the Mack... are you going to clean the inside aswell? so you can start fresh from the inside aswell as the outside.. i do not talk about repair things but just clean the mess? Also maybe it is easy for you to put your camera somewhere in a corner overlooking the Mack or the part you are busy with and show what you do in a timelapse.. maybe that will be easier for you.. also maybe that is for something on a (for you) less interesting part? Gr from the Netherlands.. 👍👍 ( btw this is not like "You should do this", its more like just a suggestion or a question...)
@willianvos3521
7 ай бұрын
From where in the netherlands?? Ik kom uit drenthe
@rens1794
7 ай бұрын
Gilze, Noord - Brabant...
@willianvos3521
7 ай бұрын
@@rens1794 zwinderen drenthe
@jamesthomson9065
7 ай бұрын
Air it up with your air compressor.
@letsgobrandon8
7 ай бұрын
Where do you buy your dynamat
@DuffyAg
7 ай бұрын
I got it from JEGS racing
@mattweber4531
7 ай бұрын
I would straight pipe it and take the muffler off and have plan pipe lot cheaper a muffler isn't cheap
@gerrylee4907
7 ай бұрын
and have hearing loss after 2 days of driving with straight pipes.
@quannyfourtwo4366
7 ай бұрын
Duffy commented yesterday he has tried that and its too loud particularly for his videos
@williamfrederick525
7 ай бұрын
Pronounced like guys name Lyle...
@chrisdaman77
7 ай бұрын
Get away from a laptop and move to a custom built desktop that suits your needs.
@donaldhyde604
7 ай бұрын
Safelite wouldn't do it
@JamesButtz
7 ай бұрын
Safelite wont touch anything old they to lazy
@masterful7574
7 ай бұрын
“Wahder”??????
@billhousez28
7 ай бұрын
Like watching Blare Witch. Makes me Dizzy as you move left-right-left -right 🤢 Still love the content however
@Rolaids1000
7 ай бұрын
could not watch the video.......
@O.KFarmToysdeutzallis6275
7 ай бұрын
toy tour?
@willianvos3521
7 ай бұрын
Still waiting! Maybe end of the year
@johnmaynard3445
7 ай бұрын
July 2046@@willianvos3521
@kyleblair4764
7 ай бұрын
Another long one? Ok!
@kevinkevlar8050
7 ай бұрын
It’s common it does take time but it will be worth it. She’ll be a whole new girl for you Chris. I hope you have a good year with her and don’t leave it in fucking neutral again lol but if you do you’ll know just how to fix it and where to get the parts, let’s hope that doesn’t happen. Keep up the videos and I love the headgear and yes, some angles aren’t great but overall it’s much better while watching you work with two hands that irritates me more sometimes lol have a great one. I just got laid off of these days. I might send you a email to see if I could stop by and say hello. Give you a hand for a day shoot the shit been there done that and oh yeah still doing it. I have a little farm myself in Massachusetts , Charlton Massachusetts but anyway keep it up. love your videos and your enthusiasm some days I could certainly use yours
@randalllilley7696
7 ай бұрын
Lots of water and soap is your best friend
@wicksfarm4895
7 ай бұрын
The old girl is looking good
@teddybaird2352
7 ай бұрын
That Floater tire tire on the driver's side is starting to look better and better every day.
@kaydog2008
7 ай бұрын
The new glass guys ONLY know how to sikaflex glue them in now. Unless you know a bus window repair guy. 👉👉Chris should of tested the horns with the air compressor before he installed it and installed a cone shape screen in the front to keep the mud dobbers out.👍👍I ONLY use Rain X windshield washer fluid for all the equipment I use.
@daviddobson1113
7 ай бұрын
Lol it isn't a smokers window it is called a wing window
@Popcorn-uv4bx
7 ай бұрын
We call it a vent window
@andyzumwalt3632
7 ай бұрын
Im looking forward to the truck on the road. And getting tillage/planting equipment ready for the coming spring i got 7 weeks till i plan to plant corn here in the south. Also glad you didn't wait for the corn to dry down a few more points
@chrisdaman77
7 ай бұрын
Really enjoying the longer videos!
@toddlandeck4461
7 ай бұрын
Just remember to use the parking break when you start running it again 😅 but it great that you put her back together an old mack like that will always get you home
@bigteddy66
7 ай бұрын
It took a break coz the brake wasn't on.
@burtzorn4059
7 ай бұрын
Hopefully you have enough time to get everything ready for spring. Please don't half ass your spring planting. I know you need to haul manure to pay some bills. But a half ass late crop will cost you money to.
@keng5101
7 ай бұрын
Kleinn Air Horns are great quality for the money. Check them out. I have a set on my truck and work great.
@michaelkobeck3577
7 ай бұрын
Your head mounted camera angle is pretty decent
@duanerose9940
7 ай бұрын
If the washer motor is still wired the way it was for positive ground the motor is running backwards might check that if it isn't pumping
@harveyotoole2029
7 ай бұрын
Exactly, just because you hear it run, doesn't mean it's running the way it should.
@mikevickrey3902
7 ай бұрын
My updates were so good it made the programs useless
@rickwoodvine.7529
7 ай бұрын
Enjoy the educational of how to do things on the farm ❤
@jamesharvey8886
7 ай бұрын
Liking the head mount
@poupy132
7 ай бұрын
You did great on the windshield
@thomasrogers4201
7 ай бұрын
Great video.
@kapekodbob
7 ай бұрын
Excellant !
@perttikauppinen2353
7 ай бұрын
😮
@colinevans9303
7 ай бұрын
🚛
@chuckg9805
7 ай бұрын
The head camera is GREAT!!!! Much nicer to watch you work without using only one hand to get the job done. Your work is hard enough without being able to use BOTH hands. Cooking show - J. KWNJI LOPEZ-ALT - has one of the best head camera setups. Great videos, your getting er done.
@tonyh.5827
7 ай бұрын
Damn nice job on the MACK~!!! Absolutely LOVE your show~!!!
@richardvirchow2757
7 ай бұрын
Looks beautiful keep it up I love seeing you improve your knowledge. Keep this up, and all we can do is let god help with the decisions that you make to help with the farm. You are achieving your dreams keep it up, Duffy let God direct the way for you to go in the farming direction. I have let god direct my own life even though I am in hospice care I left things, up to god and I am still here and alive yet today. You are breathing heavily anyway please don't rush things just jump to something easier and wate for someone to help you get it done without braking, or a windshield to prevent failure just due to being in a rush. Just don't overexert yourself it can cause a heart attack I care to let you know that although it may not be my business I can't afford to lose as a young man who wants to farm. Again trust in God and his prophecy in the King James Version of the Bible. Since I am in hospice care reading the Bible it is what I believe in and it has helped in times of suicide with in my biological family and abuse by my biological father not by my adopted father. Sincerely! R.S.V.
@dougford5259
7 ай бұрын
Great job! Getting close to having the old girl back together. Oh, the company name, Lisle, is pronounced same as the name "Lyle." Wonderful old tool company originally from Clarinda, Iowa. If you do anymore glass work like the windshield, two things- First, get or make a small wood or plastic spatula for the seal. And second, we used to use GoJo non pumice hand cleaner for lube. It doesn't dry like water but rinses off easy when done.
@burtzorn4059
7 ай бұрын
Think everyone is couris how your crops did. Would you be willing to share bushels per acres and anything else. We know they looked good all summer. Other than all the dam rain and didn't quite mature you had a good first year.
@philipasbury9173
7 ай бұрын
It’s coming together slowly but surely. The calves, try and get an IBC and take the plastic cube out the frame and you’ll have a hay rack for the calves rather than feeding it on the floor.
@jeffgriffith490
7 ай бұрын
I’ve been watching these videos for a while now to all the people say do this and that there’s your way and my way and there’s DUFFYES way lol 😮😅keep up the good work friend
@jaxntax5509
7 ай бұрын
I learned how to install that type of windshield or wind screen on a 1961 VW Bug and a 1965 911 Porsche, those were my first but far from my last doing that style of window.
@eddybekkers
7 ай бұрын
love to see your videos, little bit jealous because you gonna drive a new mack and a new peterbilt and you own a farm.😁
@jimmyhartman4596
7 ай бұрын
You must not have insurance because every time I have a windshield issue my insurance company gets right on it no question asked and my premiums have never gone up
@willianvos3521
7 ай бұрын
Fill it halve with water to test if it runs good. For window wash in cars 500ml window wash and rest water and you will have no problem
@vladislavkolarik8019
7 ай бұрын
Did you know you can use air compressor to fill your truck tanks up.
@johnpierce1251
7 ай бұрын
Air horns would have looked way better black on the outside of them they didn’t polish up as good as the rest
@dailesperry8256
7 ай бұрын
Didn't know there was a proper tool for those seals in the window always used a small bent screwdriver
@davidforbes6250
7 ай бұрын
Gooda!
@sparis1020
7 ай бұрын
Will the two rotating lights on the top of your cab be ok if they shoot silage over the cab? The tractor looks great. 😊👍🏻
@rickwoodvine.7529
7 ай бұрын
Enjoy your channel Duffy
@BabyJesus440
7 ай бұрын
Does the horn need a gasket on the roof? Hope it's tight enough it doesn't leak
@RNX001
7 ай бұрын
Yea man. The head mount camera is great. 🤙
@jasonbeecher509
7 ай бұрын
Looking awesome man. Keep up the awesome work
@johnhenderson299
7 ай бұрын
Great video
@cadcad4974
7 ай бұрын
The Mack is looking Fine!
@vicconi3723
7 ай бұрын
How bad will the passanger door bang the air stack?
@mattg1987
7 ай бұрын
He mentioned there are hinge stops that are ment to prevent that, last I seen he hasn't adjusted them yet.
@scottfoster6576
7 ай бұрын
You are more faster on the military s*** tanker. This gets old watching a video on the stupid Mac you taking 6 months to put it back together you're quicker on the military s***tanker
@markgamble8377
7 ай бұрын
He has done a really detailed job id say.
@gerrylee4907
7 ай бұрын
he's good at what he does, and that takes time, sometimes a lot of time, so if you're looking for speed , try a channel where the guy doesnt know what he's doing.
@thepeoplespal5
7 ай бұрын
I must be odd then, I love these longer videos showing the full process warts and all.
@andre-rg9rp
7 ай бұрын
Maybe you should try rebuilding a piece of equipment like that yourself it's a great skill to have on a farm
@mattg1987
7 ай бұрын
Idk about you, but with everything else I have going on my big rebuilds just take a lot more time. Between few hrs here few there, could be months to get done what a shop would do in a few days/weeks. Just is what it is but sure is cheaper, 😂.
@martybeaudry5747
7 ай бұрын
worst paint job ever
@markgamble8377
7 ай бұрын
Truck looks great.his passes with paint gun little to fast so looks roughish. If u get up close. So what i think it looks pretty sharp. He is a farmer not a autobody painter.i bet he could learn it tho pretty quick
@martybeaudry5747
7 ай бұрын
@@markgamble8377 looks like it was painted in the dark by a drunk as fuck blind man
@gerrylee4907
7 ай бұрын
you havent seen the worst paint job ever, i painted a truck with a paint brush, actually turned out not too bad.
@quannyfourtwo4366
7 ай бұрын
Your youtube channel details please so we can view some of your perfect efforts
@martybeaudry5747
7 ай бұрын
@@quannyfourtwo4366 my work is perfect because I'm perfect 👌
Пікірлер: 118