Ive been researching this and the nedland like crazy. This trailer looks nice but some key differences ive found for anyone else looking. Nedland has 4 inch cylinders for both lifting and reeving cylinders. Reeving cylinders have nitro hardened rods on the nedland to avoid pitting and cylinder seal failure due to rocks and debris denting the rods which you would eventually have on chrome coated rods. All corners are gusseted and welded fish plates reinforce all high load areas of the frame. 18 ply j load rated tires. 13hp honda engine also. The protainer does have a conventional gooseneck and overall shorter length if your specifically lookijg for a gooseneck. Nedland is slightly more expensive also with the gooseneck attachment. I hope this helps someone
@darkhorrus
7 ай бұрын
I am fortunate enough to be buying a used Nedland tomorrow and I've been watching videos on various roll offs as the excitement of the purchase has re-sparked an interest in me. This one is pretty good but Nedland is the best that I've seen... Well made, lots of gusseting and overbuilt. I also really appreciate the swappable nose locks and flip up locks for smaller bins as well.
@cregxy
7 ай бұрын
@darkhorrus congrats! I'm really leaving towards keystone. They are closer to me, I really want a standard gooseneck and shorter length, and I don't plan on keeping this trailer forever.
@rogerl8488
3 ай бұрын
Sounds like Nedland better.... what about idlerolloff trailers compared to the other 2?
@martinliraz7530
Жыл бұрын
Have the same trailer. Dude filled my 15 yarder up with tile and mortar. 12k lbs. Loaded it up no problem. Dumping it def struggled. Had to shovel some. Won’t be allowing that kind of anymore.
@aslife3813
Жыл бұрын
I bet that was a fun haul! I never let anyone rent more than a 10cy can now for heavy loads
@mojohauling2716
9 ай бұрын
Sweet trailer, I’m about to order the 20ft protainer. Thanks for posting, this is one of the better videos out there on this trailer
@JoseGomez-fz4cl
2 жыл бұрын
I recommend you get the Ft. Knox lock that goes over your set screws also. Someone can loosen your sets screws, drop your gooseneck, insert their own and roll off. No pun intended. I’m still waiting on my Nedland setup. Ordered December 3rd last year. Praying it gets delivered soon. Thanks for your video and the information.
@aslife3813
2 жыл бұрын
Thanks for watching, that’s a good point I’ll look into one asap
@AmericanAFDumpsters
2 жыл бұрын
Bro the hydraulic jack on remote control sold me!! Makes things soooo much easier! Also the 8k axles de-rated is genius. Did you ask Protainer to do that for you or did they offer it up front? What was the cost difference to go that route vs the 7k axles?
@aslife3813
2 жыл бұрын
They were standard on that version, they are torsion axles so no springs or anything. Much better weight management. Couldn’t tell you the difference on 7k axles as I didn’t have to ask for them. Congrats on the new Mack! That thing is sweet, I’m gonna get a standard cab tow rig next and put a driver in it after I get more cand
@adamhensley6126
Жыл бұрын
Great overview. Did you ever get the hydraulic overflow situation fixed?
@aslife3813
Жыл бұрын
Thank you, it seems to have resolved itself now that that excess fluid is out haha
@kenlavoie9334
2 жыл бұрын
I called Pro Tainer and they mentioned they has 2 trailers. So, is the stronger trailer a truck axle? Looking to Protainer as well if I can gain momentum here in Kentucky
@aslife3813
2 жыл бұрын
If they install 10k axles, you can haul huge 30-40cy cans with triple axles set up. But you have to consider the length of the trailer/truck combo. That’s a huge set up, there’s a reason why the big boys buy roll off/hook lift trucks instead
@AntonioHerrera-t1q
Ай бұрын
Hi, I have a tax question, Where did you pay your sales taxes? I heard you live in Colorado and buy te trailer in a different state. I am fixing to buy a trailer out of state and I don’t know if I will pay in Texas or Florida. I leave in Texas.
@DK-pw7uh
Жыл бұрын
where is the cheapest place you’ve dumped in CO? Transfer station? Landfill? Etc.
@aslife3813
Жыл бұрын
Landfills are cheapest, but you need to establish an account first. Public prices make business impossible
@DK-pw7uh
Жыл бұрын
@@aslife3813 tell me about it….prices are ridiculous. What all is needed to establish an account?
@chrisrichardson8908
Жыл бұрын
What’s the prices of these trailers and dump cans
@robwood7276
Жыл бұрын
Your nephew thinks your a baller!!! Great vidya!!!
@aslife3813
Жыл бұрын
Thanks ram!!! Love y’all see you for 🦃 day
@aslife3813
Жыл бұрын
*fam
@danm3346
Жыл бұрын
Do you know if it’s possible to swap out an electric motor for a gas motor on that trailer ?
@aslife3813
Жыл бұрын
You can put an electric backup but not sure how you’d get it to run the hydraulic pump if the the gas motor goes down. Just change your oil and keep up on your maintenance
@andrewkolarek4551
10 ай бұрын
Question, do you have a back up camera to hook up. And because of your 14’ trailer, what size is your dumpsters, thanks
@aslife3813
10 ай бұрын
No camera, just mirrors and lots and lots of practice. My dumpsters are roughly 14’ long rail length
@andrewkolarek4551
10 ай бұрын
@@aslife3813 thanks, I like your set up, and I just subscribed. Looking forward for more videos.
@davidc5808
Жыл бұрын
is your truck on airbags? does the 2500 have any problem towing super heavy loads?
@aslife3813
Жыл бұрын
No air bags, I currently run Timbren bump stops. I have a video on those if you’re curious. And no it seems to handle them well. However, a dually will always be the best option for heavy towing.
@scottlopez7622
Жыл бұрын
Do you ever have any complaints about the noise from the gas motor?
@aslife3813
Жыл бұрын
No sir. I wouldn’t recommend running it in a customers driveway at 5am but no, it’s not crazy loud.
@shanepipkin4041
Жыл бұрын
is protainer cheaper price than nedland? what's major difference in 14k and 16k?
@aslife3813
Жыл бұрын
Not cheaper. Just small differences in materials and motor. They’re very comparable
@tecraptor
2 жыл бұрын
What’s the heaviest tonnage you’ve hauled on this?
@aslife3813
2 жыл бұрын
About 3.5-4 tons. Handled it really well
@danielstrong650
2 жыл бұрын
What is that exact trailer run you ?
@aslife3813
2 жыл бұрын
I’d have to look at the invoice but about $30k
@skillet318
Жыл бұрын
@@aslife3813 is that cost for the trailer only? Or with the bins?
@danthompson1467
Жыл бұрын
It’s not even close to a Nedland
@vinced3410
Жыл бұрын
Why you say that? Looking to purchase a trailer and looking for honest feed back between the two.
@cregxy
11 ай бұрын
Why would you say that? No honda motor, no oil bath axles, what else is it missing?
Пікірлер: 42