0:00 intro
0:14 what's in the box?
0:39 set delivery
0:53 presentation of the ProWELD MIG832e device
1:34 wire winder.
2:14 mounting the coil with flux wire.
2:55 flux cored wire welding
3:10 how much current does it consume when welding with a 1.0mm flux wire?
3:35 some advantages of flux cored wire welding.
4:33 stick welding (MMA/SEI)
5:13 welding cord with electrode.
5:23 how many amps does it put out?
5:36 how much current does it consume when welding with an electrode?
6:06 preparing for LiftTIG welding. Modifications to the WP-17 welding torch, 4551521048.
7:23 Lift TIG welding samples (with argon).
8:07 A good time to subscribe to this channel ;)
-----
MIG/MAG, MMA and TIG multi-process welding machine, recommended for welding a wide range of materials.
Welding function with 1.0mm FLUX wire. Wire coils of max 1kg, diameter 100mm can be used.
The MMA welding function with coated electrode allows welding of alloyed and non-alloyed steels, stainless steel, with electrodes up to 3.2mm.
Lift TIG welding requires TIG torch with argon valve, optionally available (WP-17V).
Technical data:
Supply voltage (V) Single-phase 230V±15%
Frequency (Hz) 50
Nominal input current (A) 21.6
MIG output current (A) 30-140
TIG output current (A) 10-140
Output current MMA (A) 20-140
Output voltage (V) 15.5-21
Voltage at idle (V) 60
Absorbed power (kVA) 5
Operating mode (%) 60
Power factor 0.73
Efficiency (%) 85.00%
Wire speed (m/min) 2 - 13
Post time (s) 1
Wire roll diameter/weight (mm/kg) 100/1
Welding wire diameter (mm) 0.8 - 1.0
Housing protection degree IP21
Insulation class F
Corresponding thickness (mm) Over 0.8
MIG/MAG / TIG / MMA functions
Inverter technology
Weight (kg) 5.7
Dimensions (mm) 325x145x275
Негізгі бет Тәжірибелік нұсқаулар және стиль ProWELD MIG832e multifunctional inverter MMA / FLUX / TIG
Пікірлер: 45