Gostaria de agradecer pois meu plugui do culer ps2 rompeu cabo negativo e difícil acha outro culer conquistei mesmo lugar e agora ele funciono obrigado
@kalamatagames2631
2 жыл бұрын
any Fan cooler work like propeller the sharp side is always look outside it is the input side of air
@edivadR
Жыл бұрын
Great video. Looking into do this , Just wondering what the wire is called you soldered and then plugged the fan into is called? Thanks
@wavy03
3 жыл бұрын
Do you REALLY need this temp wise? I'd go for the fan as well lol, it looks so sick.
@embergabor
3 жыл бұрын
It is not for temps but for noise. PS2 Fat models tend to have loud fans and replacements are not that cheap. I had this big fan on hand so used it as a replacement.
@wavy03
3 жыл бұрын
@@embergabor ohh I see, great work still!
@MassimoAntonioCarofano
2 жыл бұрын
Hi, does anyone know a Brand-Model to recommend for INTERNAL FAN replacement? I know the FAN for PS2 FAT must be 60x60x15mm, 7V powered with a 2Pin connector (7v and 2pin is not so common)..
@manwhoeatsfishinbedwithlig3791
Жыл бұрын
There’s a replacement bracket for a noctua fan (little bulge out the back side but if you have the network adapter then it will fit right in)
@flytie3861
3 жыл бұрын
How can i solder the fan to the pcb?, the layout seems familiar but my ps2 scph 50004 is different compared to yours
@victorchamorro4111
7 ай бұрын
Le soldo un fan cooler de 12v a la fuente ..
@estefannyleon1506
Жыл бұрын
Amigo además de esa modificación. Podrías poner una celda peltier y pasta térmica entre el disipador de calor y la celda con un separador de aluminio
@castellfenix
4 жыл бұрын
Hi dude...good video, I saw that you soldered it directly to the power supply... does it matter if I have a different version of ps2 fat?, the power supply has the same conections for solding?
@embergabor
4 жыл бұрын
They should have the same pinout. However soldering to the PSU means that the fan will run when the power switch at the back is on even when the console isn’t. You can use the 5V USB power instead if your fan can work on 5V.
@embergabor
4 жыл бұрын
kzitem.info/news/bejne/sHqPzJaDgnWpmIY
@mycustardlove4168
3 жыл бұрын
Is the fan on top pulling air in? And is the back one still working or do you disable it?
@embergabor
3 жыл бұрын
I back fan is disconnected and the top fan is pulling air out of the case
@alksnake5703
3 жыл бұрын
Super video, you have pick the 12v on the psu but After you connected the 12v on the yellow cable of the fan or the red cable on th fan ? we need to do two connection or three connection for the fan. Thanks
@embergabor
3 жыл бұрын
You only need the 3rd cable for pwm fan speed control. If you connect with 2 cables you will have constant fan speed.
@alvokolinvocateur6457
4 жыл бұрын
What voltage for the fan ? 12v?
@embergabor
4 жыл бұрын
Alvoko L'invocateur The fan itself is a 12V fan. I connected it directly to the power supply’s 12V output, but later added a dc to dc converter with voltage control to be able to adjust the fan speed. The fan is on when the ps2 power switch on the back is on.
@alvokolinvocateur6457
4 жыл бұрын
@@embergabor I can use the original fan header without problem?
@embergabor
4 жыл бұрын
@@alvokolinvocateur6457 You can, but it is around 5V to 8V only so 12V fan will spin slowly. It may be enough but really depends on the fan you are using. The Ps2 fan header is not a standard pc fan header but you can cut the cable of the original fan and solder a standard fan header on it, or solder directly to the fan's cables.
@Cloud-wq3hf
3 жыл бұрын
Now It Will work at 100% and make even more noise
@embergabor
3 жыл бұрын
It works at a constant slow speed.
@sparki2494
2 жыл бұрын
...why?
@embergabor
2 жыл бұрын
It had a loud fan and a replacement fan costs as much as a console. I had this fan and used it since no other fan I had fit the case
@javiiermartinez4437
4 жыл бұрын
Buen video.. alguien que me diga el nombre de la cancion???
@wellingtonfranco.1793
Жыл бұрын
O ar têm quê sair não entra..
@embergabor
Жыл бұрын
Yes, the fan is blowing air out of the case.
@dstack18
3 жыл бұрын
over kill
@furryslipper
Жыл бұрын
For what??
@middle_pickup
3 жыл бұрын
Why though?
@embergabor
3 жыл бұрын
Got a big batch of faulty ps2s for next to nothing and this one had a very loud fan. I had a big fan at hand. Of course you can do better but not for $0. A replacement fan costs as much as a used ps2.
Пікірлер: 37