That click is the rotating mod. Had the same thing on my EVL 34. Put a little string wax on it and it's never done it again (over a year). Stupid problem, but easy fix.
@PAKraig
Жыл бұрын
I appreciate the time that goes into the reviews. Nice to have someone with experience and a shop at his disposal for such content. When you adjust the draw stops from 90 to 80, it shortens the effective draw length. It's even apparent by your anchor point. Please consider adjusting the draw length module at that time too. Thanks!
@l.i.archer5379
Жыл бұрын
I had a chance to set up and tune a PSE EVO XF 33 today. I noticed that the cables don't have separate floating yokes, but split yokes criss-cross routed through that plastic yoke separator due to this new design where they took away the limb tip yoke posts and moved them to the cams. I really like this design, because now you can actually yoke tune the cams again to get them to lean one way or the other.
@heathhenry6083
Жыл бұрын
I didn't know the S2 Cam didn't make that much difference of speed. That very last bit before you hit the wall on the draw looks like it would take some getting used to. Thanks for the review MFJJ!
@stefanwehde330
Жыл бұрын
I would appreciate it if you could measure the noise level of the different bows, because for a bowhunter it is of course important. Thank you a lot for your cool bow comparison- videos.
@bigrainbow25
Жыл бұрын
Mikes Archery did a review on this bow and measured the noise level... its mouse fart quite
@zachlewis9451
Жыл бұрын
I've had a couple friends PSE's make that same click. They had screws backing out all the time in the module system
@YoureSoVane
Жыл бұрын
That's solved easily by using Loctite and/or a washer with the bolts.
@zachlewis9451
Жыл бұрын
@@YoureSoVane cannot use washers but yes we used red threadlocker it was a quick fix but some of those rocket ships PSE make end up backing them out still from such force on the cams at the shot
@YoureSoVane
Жыл бұрын
@@zachlewis9451 Prime added tiny washers on my warranty cams. Made a big difference. I'm impressed that those bolts still walk out, though. I've also used super glue in a pinch and that worked pretty well.
@zachlewis9451
Жыл бұрын
@@YoureSoVane the alien head bolts pse used on my friends were all recessed and had to be flush with the cam. So we couldn't use the washers. They have both since switched to elite and mathews. This was before the new cam systems tho. When all they were making was speed bows.
@ApexPredatorOutdoors
Жыл бұрын
That 80 percent was aggressive!
@glaser73
Жыл бұрын
I bought a PSE Mach Flite 4 back in the day. You know what that means? I’m old 😂
@Cody_Austin
Жыл бұрын
I agree with Stefan, could you get a decibel reader and see how loud each bow is? I’d really like to see that!
@mikereed845
Жыл бұрын
Been waiting for this one.
@WildTines
Жыл бұрын
That popping on the draw does sound scary!!
@BROMETHIUS11B
Жыл бұрын
Would you be so kind as to do a video on how to do that dope ass arrow flip?
@kodijones5348
Жыл бұрын
You should do Athens Archery’s bows in the future!
@gavinatkins2671
3 ай бұрын
This comment didn’t age well….
@chrisu8272
Жыл бұрын
I've never seen a bow increase in speed when going from 90% let off to 80%. It's always less or about the same. Thinking about it, why would it get faster? You're rotating the cam less with the lower let off, so the speed should decrease.
@Makka316
Жыл бұрын
I think you may have essentially answered your own question. The higher the let off the more speed lag there is at the start of the shot as the cams roll over towards peak poundage. On that basis the same bow, set at exactly the same draw length but different let off between shots should potentially be slightly faster at the lower let off setting. The main point here is that they need to be adjusted so the draw length is exactly the same for each let off setting in order to compare. A bow can lose a slight amount of draw length when you lower the let off because the cams don't come over quite so far so, while you may slightly reduce the speed lag at the start of the shot for lower let off, the draw length travel is then slightly shorter which counteracts the speed advantage of the lower let off. Of course I could be talking out my a$$ as I'm no expert on the subject but as an example my Elite Remedy is about 4fps faster at 80% then 90% let off if I adjust the draw length setting longer by a 1/4" to compensate for the slight draw length change in dropping down to 80%. If I leave the draw length module setting the same the speeds are about the same but then the actual draw length is around a 1/4" shorter at 80% let off.
@aaronhall765
Жыл бұрын
That clicking sound the last 4 draws? Was it mod screws loose? $1900 bow.... If manufacturer says use a press to change, I would use the press... lol do so at your own risk 😅 🙃. Thanks for the review.
@allenr6687
Жыл бұрын
That is awesome $1500 bow and it sounds like the bearing in top cam is going to explode..good quality control right there…
@Bluesplayer789
Жыл бұрын
Is the draw worth the extra 4-6 Ibo speed that you measured. I'm 30.5" so the S2 was looking the goods but from your vids looks to have only increased speed 4-6fps (shooting a 495gr arrow)
@toothlessarcher
Жыл бұрын
That hump on the back end looks terrible to get used to at 80%. Also, living in Canada, that bow is $2300 CAD.... terrible price
@calebtenney7871
Жыл бұрын
Did you figure out what was clicking?
@vm859
Жыл бұрын
Gotta wax the back of the module. Has happened to almost all my pses and waxing makes it go away.
@jordanpowell228
Жыл бұрын
@@vm859 ive had happen as well. Which really freaks the eeef out
@hardbodytone06
Жыл бұрын
I know that that clicking is I have the levitate. It’s the mods gotta tighten them down more mines don’t do it anymore.
@dougieripley2095
Жыл бұрын
MFJJ needs to be one of a triplet. 1 MFJJ to do bow and tech reviews 1 to run the shop and 1 to kick Elkshapes ass at TAC 🤔
@christopherwolff4527
Жыл бұрын
You ever figure out what the ticking was when you drew the bow ?
@GlenKimpton
Жыл бұрын
Did you adjust the draw to make up for the reduced draw length when going from 90 to 80 %?
@evang4622
Жыл бұрын
Have you reviewed the PSE Omen?
@kevinwright3564
Жыл бұрын
Do you review any target bows or strictly hunting bows?
@oscarbarraza3613
Жыл бұрын
Test the dominator please
@parkerlipetzky
Жыл бұрын
Has all the check marks except the price.
@DeltaMikeNoshoot
Жыл бұрын
Is there no sound on this video or is it just me? There is only the intro music.
@darrind8697
Жыл бұрын
At 30" draw which cam and at what letoff would you run with ?? cheers
@EntryLvloutdoors
Жыл бұрын
Do the omen
@sagrieff
Жыл бұрын
are you in a hurry or do you just hate making the videos,
@rockyowens2206
Жыл бұрын
It does seem when he does pse reviews he don’t have a lot of love for them. I’ve watched all of his bow reviews.
@TheArrowsEdge
Жыл бұрын
It's a PSE thing, agreed.
@ViCtOrZ803
Жыл бұрын
MFJJ is just so efficient in his reviews.
@deadair5737
Жыл бұрын
PSE pull shoot explode sounds like it's going to blowup
@terrydewayne7690
Жыл бұрын
Whats the click ? That worries me...1900$ bow...youd think every one of them would be quality controlled to extreme.
@loui9102
Жыл бұрын
🏹🦃🦌🇺🇸
@mattgoin
Жыл бұрын
Yeah wax the back of the mods.
@TheSchmuel
Жыл бұрын
Podium Archery---Where the CHRONO is So SLOW... Ive seen a bunch of other vids where same bow and same arrow is getting 340 fps. This particular chrono is ALWAYS 10-15 fps slower than all other testers... maybe he has the only accurate chronology in the business? I know he certainly thinks so
@andrewkieper5613
Жыл бұрын
Yes, those chronos "read slow" but they also match up with any speed calculators or archery programs for sight tapes. So are they really slow, or are the others reading fast? As long as its consistent throughout the bows that's all that really matters for his tests.
@jsienesi
Жыл бұрын
Not going to lie really like the specs of this bow but it sounded and looked awful in that draw cycle 😂
Пікірлер: 50