I guess its pushed out at the same time as the video.. in 2 hours, the link is "We Couldn’t Find This Page"
@EClipChannel
Жыл бұрын
@@psychogen604 the page will be available in the same time as video. 18:00 CET , in 3hrs
@Plotkin_
2 ай бұрын
Man you’re a true professional
@myriaddsystems
Жыл бұрын
Hurray! A Kick 2 indépendant tutorial😁
@swisavi
Жыл бұрын
graet turturial!! watining for the bass line ////
@Skanoh
Жыл бұрын
This is some great knowledge you dropped on us! Thank you so much:)
@theunconciousmind7314
Жыл бұрын
I've been waiting for this 😁
@arthurcuevas5432
Жыл бұрын
amazing tutorial and amazing bassline Clip
@cryptout
Жыл бұрын
The last tip is golden, don't over tweak the Kiba in the beginning of the track but at the end.
@EClipChannel
Жыл бұрын
😉
@DigitalMatterMusic
Жыл бұрын
Big thanks x the preset, as always, big content!
@kenjipereznagano3811
Жыл бұрын
Tnks so so so much! i apreciate a lot a lot!!!!!
@EClipChannel
Жыл бұрын
You are welcome
@pamayaatra
Жыл бұрын
this topic is so logic but i was never thinking about it so exactly like you :D great 👍👍👍
@EClipChannel
Жыл бұрын
Yea, I also never had the same thoughts before started making videos. I’m learning so much by doing this!
@pamayaatra
Жыл бұрын
@@EClipChannel then make more videos 😁
@100PEACEOFLIFE
Жыл бұрын
Cool track !
@papuyonic
Жыл бұрын
What a beautiful masterclass ❤
@ricardolimalopes2343
9 ай бұрын
Thank you so much
@zenyonnocomment4399
Жыл бұрын
Iove you bro. ❤
@floatinganarchychannel3204
Жыл бұрын
Thank you for this amazing tutorial!
@myriaddsystems
Жыл бұрын
THANKS!
@Solarisbr
Жыл бұрын
keep the great work =D
@ColdRane
Жыл бұрын
Hey E-Clip, I really appreciate your Videos. I learn a lot from you. Could you please remove the Lense flares flying over the video? I find them very distractive. Thank you very much! :)
@Nenko_Music
Жыл бұрын
good stuff.thk you sir😎
@SuckeroftheYear
Жыл бұрын
@truthbetold2012
Жыл бұрын
can you do one on making the high end wide and shimmery especially the hats.
@EClipChannel
Жыл бұрын
Sure
@digitalbraincreativegames
Жыл бұрын
Perfeito!!
@matheusmartins6125
Жыл бұрын
Eu n entendi nd , mas sei que ele e foda d mais kkkkkkkk
@morsecode_GR
Жыл бұрын
Hi E -Clip! Another great video. apply in my group kick - bass a pha-979 and with -1 or +1 i see a difference in hole mix. i hear more clear the kick bass. what your opinion?
@EClipChannel
Жыл бұрын
That’s good, but I didn’t understand -1 or +1, but anyway, if you are getting results you need, then I don’t need to understand 🙂
@deoananas4745
11 ай бұрын
14:10 how did you made the totalyzer visible on top of everything in cubase while you click on other plugins? Very nice channel and video clips btw
@EClipChannel
11 ай бұрын
Yes, there is “always on top” option!
@Martin-vj7zx
Жыл бұрын
Kick is not tonal, but isn't it nice when the lowest frequency of the kick ends where the base starts and to make them the same frequency?
@EClipChannel
Жыл бұрын
Defo. But not for all keys.
@ehlerszorgman1298
Жыл бұрын
With so much Eq and processing on the kick.... doesn't it effect the shape ? I have see on a scope after applying only eq on the kick in kick2 the shape of the kick changes dramatically
@EClipChannel
Жыл бұрын
Of course, it does! That is the purpose of EQ!
@drdubs8934
Жыл бұрын
What kind of settings do you use on ur Digicheck? I know this is more or less taste but , are there some important ones i need to consider?
@EClipChannel
Жыл бұрын
I think you should use what you are used to. I use other ones if I need to analyze in detail, spectrogram or waterfalls, as free response won’t show the decay of the frequencies which I believe is one of the most important things
@Kikudoxx
Жыл бұрын
At 10:26 u say the kick is ending at 50hz. But the window size of kick 2 is at 340ms. Obviously in the amp envelope the kick is stopped before reaching 340ms. So the kick is not ending at 50hz. I always asked myself how the window size and pitch envelope is corresponding to each other
@EClipChannel
Жыл бұрын
I said “for example”, the kick ends frequency dot is at 42hz but as I said, It's only for example, to me it doesn't matter what’s the frequency as I set it by the ears. I just used it as an example. But you can rewind and see that the end dot is set at 42hz and it can be possible that the end frequency is 50hz. But again, it doesn't matter. I just spoke about the hz to make a point on which I spoke about. And if you pay attention closely, I’m sure you understand the point.
@v_north
Жыл бұрын
Amp envelope adjusting itself to kick length? If you draw back the amp env the kicks last ozillation goes, then the next etc. It's been a while but I believe that was how it worked.
@EClipChannel
Жыл бұрын
@@v_north not sure what you are referring to. The Kick amp in the video is around 340ms, and the envelope is ending a bit earlier. You can check the grid in Kick2, and I know that 2x1/16 on 138 bpm is around 200ms. That’s why I said it's around 200ms. About the frequencies: The endpoint is 42hz. This means that at the 340ms point, the end frequency is 42hz, so I said around 50hz as a guess that if the frequency on 340ms is 42hz was that on 200ms the frequency ending around 50hz. That was only a guess, as I am not interested in exact numbers. The kick was designed by the ears. So the first comment was that I said something which I didn’t. The end frequency point in the video is 42hz, not 50hz as you wrote in the first comment.
@Kikudoxx
Жыл бұрын
@@EClipChannel ahhh now I get the point!
@v_north
Жыл бұрын
@@EClipChannel I think we answered the same time, thanks for the explanation😂👍
@PhreaSpirit
11 ай бұрын
phase correction on a mono synth?
@EClipChannel
11 ай бұрын
Of course! Why do you think that phase can be refered to a stereo only? If you have two mono signals, their phases can cancle or boose eachother. As well, the phase position of the mono signal can influence how it will sound ( not much, but it will ).
@PhreaSpirit
11 ай бұрын
@@EClipChannel Interesting. I need to wrap my head around it. Thanks for your answers and videos - they're very helpful!
@EClipChannel
11 ай бұрын
@@PhreaSpirit phase is just a direction of the cycle. The most important is when two oscilations of similar frequecy are meeting together. It can be one of more, stereo, mono, can be two mono…
@Solarisbr
Жыл бұрын
how much latency does this cause? ty
@EClipChannel
Жыл бұрын
Latency coused by what? But whatever the latency is, once the kick is designed, it will be bounced to wav, and whole channel with Kick2 and processing or saved as preset or exported. So the whole process won’t cause any latency for the track
@Solarisbr
Жыл бұрын
@@EClipChannel Thanks master. But after you have the kick sampled... do you cut the space before the transient on the audio? Therefore, do you phase align it with the bass, also sampled? Btw, you played on my party, Deep Forest. Hugs!
@EClipChannel
Жыл бұрын
@@Solarisbr as I said, there are so many things going on and it’s a too wide a topic to answer in one video. We could go on for a very long time with so many questions like this. There are many videos on my channel on the same topic
@theunconciousmind7314
Жыл бұрын
I make my kicks so diffrent! I have so much more mids in the click or punch. I wonder if its because of my bad speakers or if i just have a diffrent style or taste.
@EClipChannel
Жыл бұрын
🤷🏻♂️
@TheTraveller604
Жыл бұрын
why your fab eq is clipping red ? everything is red on the road
@EClipChannel
Жыл бұрын
It’s red bacuse it’s clipping! E-Cliping!
@TheTraveller604
Жыл бұрын
mmm what ?
@Yobott
Жыл бұрын
@@TheTraveller604 it's a joke mate haha, as far as I see it's only the pro-q, probably boosted it a bit too much without pulling it down back in the chain, happens.. probably a mistake
@diegopedrada7584
Жыл бұрын
Why would I waste so much time doing the kick if I can use a ready-made kick from some Pack???? Is there a logical reason for this???
@EClipChannel
Жыл бұрын
Did anybody say that you need to do it? I don't remember saying it even once. But just because You don't want to make your kicks doesn't mean that nobody else doesn't want to do it! This video is for the ones that want to make their own kicks and that way avoid using the same kick as everyone else!
@Styles2psr
Жыл бұрын
You just talking too much....bla, bla, bla, bla.........
Пікірлер: 68