The engine has 3speeds on that engine that engine is a bad engine to the bone if I could get that push mower going again I would do it because that push mower was my work horse
@scttchm
2 жыл бұрын
I like how the engine is running about 6000 rpms too. Lol.
@LostGenes
Жыл бұрын
Definitely saved me at least a grand, making one of these tomorrow.
@randythomas3478
2 жыл бұрын
Larger motor for sure...sure do miss my Earthquake brush cutter
@anthonylegendary7292
2 жыл бұрын
I’m thinking about turning my old riding mower into a small bush hog.
@keithienmason4643
2 жыл бұрын
Push mowing my hole back yard with that push mower about on my last strip of grass the gas tank broke and busted a hole in the gas tank
@vlvtopcat
Ай бұрын
Nice Job
@bigtorrisi
2 жыл бұрын
OK the next question is can you then mow the scrub that you have cut down with the same machine?
@anthonylegendary7292
2 жыл бұрын
That’s a good question? I may haft to find out ..
@timpatterson2147
2 жыл бұрын
You need three pumps osha violations everywhere Hahhahhaahah
@anthonylegendary7292
2 жыл бұрын
It takes 3 pumps to get her primed good
@daxinventor3542
6 ай бұрын
Outstanding results without having to buy a $2,000 brush cutter. Good job bro.
@keithienmason4643
2 жыл бұрын
I have the same power of that engine to all I need is a gas tank for it then I'm back in business I blew a hole in the the gas tank from running it to hard
@anthonylegendary7292
2 жыл бұрын
Yeah I need to come up with something new maybe a riding mower motor 15hp idk yet
@metalworksbokse1844
2 жыл бұрын
Good job Brother can you check my project
@anthonylegendary7292
2 жыл бұрын
Thank you
@jonboyer4058
5 ай бұрын
Thats a small small engine too. Can you imagine if it was a bigger engine. I was thinking about doing this everything time I get a call for an overgrown yard
@joeblowjohnny2297
2 жыл бұрын
Outstanding boss 👏 ! Now that is a brush cutter in action ! Everyone else is demoing there brush cutter in normal grass ! Lmao 🤣 THANKS FOR UPLOAD !
@anthonylegendary7292
2 жыл бұрын
Thank you !! I still use mine on the tall grass .Like,Share and subscribe friend
@randythomas3478
2 жыл бұрын
Good deal! I'm gonna make this too!
@netgod3com-FUYouTube
2 жыл бұрын
Bend that front lip up further to completely expose about an inch of blade at the center along with others suggestions to change to a stick blade, it will deal better with saplings.
@anthonylegendary7292
2 жыл бұрын
I will try that thanks
@rlsaxton1
3 жыл бұрын
I did the same thing with one of my old mowers and it works pretty good. I never thought of putting larger wheels on the deck. Great idea. Thanks.
@anthonylegendary7292
3 жыл бұрын
You’re welcome..
@dubes5594
2 жыл бұрын
2 things different I did on mine.. 1. I cut the sheetmetal off all the way across to the wheels... and back, so the blade sticks out 2 1/2 inches making the mouth bigger. Then bent and welded in a 1/2inch solid bar to the new opening , down to the wheel bolt holes with some 1/8" plates 2. I sharpened the tips of the blade. This allows everything to get chopped without interfering with the sheetmetal body and it works super fast. It seems dangerous as hell cause it shoots grass out to the right but doesnt bother me unless I run over poison ivy and I get covered with it.
@keithienmason4643
2 жыл бұрын
The power of this engine is 3.75 horsepower about the same as yours my mom bought that push mower from the stock yard I still have it
@bobbg9041
3 жыл бұрын
Id just drive my lawn tractor over that stuff. Boom done.
@hafizhadi8434
3 жыл бұрын
Because u have one. Hahaha
@RideaKawasaki77
3 жыл бұрын
Appreciate the video. Was thinking about building one of these. Need it for some veey tall brush. I subbed to you. God bless you and your family
@anthonylegendary7292
3 жыл бұрын
Thank you
@timpatterson2147
2 жыл бұрын
Your the man. Legendary
@derrickbarnes5352
2 жыл бұрын
Outstanding video!!!!
@anthonylegendary7292
2 жыл бұрын
Thank you
@jacobcarter5223
4 жыл бұрын
Thanks bro I'm bout to clear 2000 sq ft of land this way.
@jasonglover5989
3 жыл бұрын
I wonder if it would make a difference if you where to sharpen the lip that got bent out?
@anthonylegendary7292
3 жыл бұрын
That’s a good idea .I might try it .
@nickphil596
4 жыл бұрын
Anthony, use a stick brush cutter with Oregon's mulching blade to do the job cheap and far more effortless. You will find a lot KZitem videos showing Oregon's $8 to $10 mulching blade.
@kdjoseph4316
3 жыл бұрын
I agree with you it quicker and easier to use in tall grass like that😂but he did good job with it
@mrgoodtimes05
4 жыл бұрын
I've cut the same part to the front, but put a hinge on it to mow short grass. With a 7 hp turning a gator blade it's a hoss. I'm gonna try a push bar to keep the tall stuff from falling back on the mower. Big wheels on the front has crossed my mind and now I know itll work.
@anthonylegendary7292
4 жыл бұрын
mrgoodtimes05 The big wheels definitely make a difference
@billycheek168
Жыл бұрын
Shaking hands with danger!
@jasondonahoe410
4 жыл бұрын
I did the same thing with an old mower I had to make some access lanes at the property where I dear hunt at in WI. Haven't added the larger wheels yet but I will now.
@anthonylegendary7292
4 жыл бұрын
jason donahoe The larger wheels makes it easier.
@feargach2107
4 жыл бұрын
Good job.
@charlievella5829
3 жыл бұрын
On my mower, many years ago, I had replaced the wheels with larger ones. When cutting very tall grass, It will reduce the stress on the mower and makes it much easy to cut. If possible replace the push handle with a longer one. Then when you get much longer brush. Push down on the mower, when you go forwards. This will help reduce some of the brush from fowling on the mower. When you need to lift the front of the mower, the longer push handle will help you from bending too much on your back.
Пікірлер: 46