Hi! What is the least expensive amplifier you suggest to drive these speakers? Could you please name a few? (Do they have an active speaker sibling?)
@QacousticsCoUk
4 жыл бұрын
Hello. Q Acoustics loudspeakers will produce great sound when matched with any good quality amplifier or receiver. There are a great number of very good amplifiers available today and we cannot be familiar with them all. Some of the brands we respect and have used in demonstrations are Cambridge Audio, Denon, Marantz and Arcam. Just check to ensure that the power capability is compatible with our recommendation for the 3010i loudspeakers, so 4-6 Ohm, 15 - 75w. As a general rule, it's better for a loudspeaker to be driven by a high powered amplifier used responsibly, rather than a low powered amplifier being over-driven. Here's a link to a blog which we have created on the subject for more information: www.qacoustics.co.uk/blog/2017/08/14/beginners-guide-matching-speakers-amplifiers/
@AJ-us8wm
3 жыл бұрын
Can they be used with Onkyo HT-R340..Its has power output of 120 watts at 6Ω per channel.. Its a pretty old one but still works great with good quality sound
@QacousticsCoUk
3 жыл бұрын
Yes, 3010i are compatible, all you need to be aware of is that the amplifier goes beyond the max wattage capabilities of the loudspeakers so, restraint/common sense needs to be employed when turning the volume up and not going beyond this point. Enjoy your music. Thanks
@UGuyU_
4 жыл бұрын
what the point of showing the design without demo of the sound , are they having subwoofer inside , are they good for rock music ..?
@QacousticsCoUk
4 жыл бұрын
Hello, there are sound demo videos comparing different Q Acoustics speakers from other audio experts. We wanted to show what is inside the box with this video. 3000i range speakers are passive speakers. 3010i is the most compact model in this range. However, it boasts a room-filling deep bass and clear sound. We have bigger models if you are looking for speakers with bigger drivers to enjoy your rock collection; 3050i floorstanding model or even Concept Speaker range Home Theater Hobbyist reviewed most of our speakers and compared them to other brands. You can watch the 3010i demo here. 5:35 - He is playing the music. It is not rock music though. kzitem.info/news/bejne/2n6A1KZ7a2eXa2U Thank you.
@psyber84
4 жыл бұрын
Can someone use these as desktop speakers?
@QacousticsCoUk
4 жыл бұрын
They are passive loudspeakers so in order to connect them to a computer, in this case you will need a two channel stereo receiver of some type. I would like to add that you ensure the front of the loudspeaker is either level with or forward of the surface they're sat on. Thank you.
@luissal89
3 жыл бұрын
@@QacousticsCoUk can I use them horizontally or just vertically as usual?
@QacousticsCoUk
3 жыл бұрын
@@luissal89 Hello, yes, you can use the speakers on their sides, but please make sure the tweeters are outside on both sides. The rubber feet will be visible and they are not easy to remove on some units, so that may be an issue. We would recommend using rubber feet of some description to isolate the speakers from the surface but unless you're an avid listener and know the music you're listening to intimately, you'll probably not pick up anything untoward by having them on their side. Please also ensure the front of the loudspeaker is either level or forward of the surface it's sat on. We do suggest a 72 hour running in period - for more information on this, please see 'Breaking-In' or 'Running-In' loudspeakers. desk.zoho.com/portal/armourhomeelectronics/kb/articles/breaking-in-or-running-in-speakers
@Rider4683
2 жыл бұрын
Hi. Should they be set large or small on the receiver? And how much crossover setting? I have the 3010i. Thanks
@QacousticsCoUk
2 жыл бұрын
Hi , we would suggest they are set to large and the crossover would be determined by what the subwoofer crossover is set to. If you have further questions, you can always contact support@qacoustics.co.uk Thanks.
@Rider4683
2 жыл бұрын
@@QacousticsCoUk ok. And with audissey app. What's the frequency filter job? I've to let him at 20000 hz or set it at 500 Hz or less?
@QacousticsCoUk
2 жыл бұрын
Hi, the technical support team member never used the Audissey app so, he is not entirely sure. However, he imagines it's some form of LPF (Low pass filter), 20000 Hz will provide the full frequency range, but it really depends where this filter is being applied. Hope it helps. Thanks
@Rider4683
2 жыл бұрын
@@QacousticsCoUk ok, so I'll not use the filter. It's ok. Thank you guys😊👌🏻
@kenjifox4264
2 жыл бұрын
Designed and engineered in UK? And at 2:36 it says “made in China” 🤦🏻♂️ Are there any speakers made in UK?
Пікірлер: 16