Here is a quick video of a do-it-yourself transmission fluid change (not a flush) using the OEM Nissan Matic S fluid following medianJoe's procedure. It was pretty straightforward. If you'd like to keep track of the amount of fluid that comes out let it pour into the drain pan and pour the fluid into an empty 5-quart motor oil jug. Those jugs have a way to measure fluids up to 5 quarts. That way you can be absolutely sure of the amount of fluid that drained out, but 3 qt's is what drains.
*For anyone wondering if they should cycle through the gears after each fill. I did cycle through the gears, but I didn’t demonstrate that in the video because I didn’t want to change Mediansjoes procedure on his write-up. That’s what I did on my GTR and I did on the Q50 as well. You do that on your own risk though. You will find that the fluid is still a bit dark when you cycle through the gears. It will require more than 12 QTs to see it clean.
[Affiliate Links]
NISSAN MATIC S: amzn.to/3oTeZv0
GEAR LUBE PUMP W/ ADAPTER: amzn.to/3ttA96I
5MM HEX SOCKET: amzn.to/3cGCTr8
INFRARED THERMOMETER: amzn.to/3jmNvNs
DRAIN PAN: amzn.to/2N0OqqM
TORQUE WRENCH: amzn.to/3tPjN7Z
MECHANIC TOOL SET: amzn.to/3DNIfuP
Low profile floor jack: amzn.to/3DKm08X
Jack Stands: amzn.to/3EPzdyu
Support the channel and grab some merch here: zillafullboost.creator-spring...
Music produced by Colossal Mind
#vr30 #diy #zillafullboost
Негізгі бет Автокөліктер мен көлік құралдары Q50 Q60 DIY Transmission Fluid Change | Carbon Forged Caps Giveaway
Пікірлер: 290