Installed one of those larger 1” front sway bays, polyurethane link bushing and Bilstein shocks. Absolutely amazing ride feel and overall performance it has now. The large speed bumps at 3-5-40 MPH cannot even notice them.
@SummitRacing
4 жыл бұрын
Thank you for sharing your experience!
@douglasadams6024
2 жыл бұрын
they make these things they are called lamps or lights, not flashlight but actual lighting devices, they are used to illuminate areas that are being worked on especially being filmed, i know you must have heard of them........?
@oldsgamer72cutlass19
6 жыл бұрын
I like this kit. I want to get rid of the body roll and just wanted to give my 72 Olds 455 a newer feel. What size sway bar should I use for my heavy 455 to take out the roll feeling?
@AZpatriot69.
8 жыл бұрын
this is the kit I been looking for to put in my 71' chevelle.
@SummitRacing
8 жыл бұрын
+jesse j garcia sr, Great choice! Please let us know if you have any questions. Feel free to give our tech line a call at 1-330-630-0240. Thanks for watching!
@AZpatriot69.
8 жыл бұрын
Will do thanks!
@cuzz63
4 жыл бұрын
I see alot of people have trouble with the front tubular A arms...you should do a vid on common problems.
@Greenerplaces
5 жыл бұрын
You didn't mention that the lower A frame bolts need to be tightened when the car is in a resting position on the ground ,failing to do this will preload the lower A frame bushings.
@dcso06
4 жыл бұрын
would have been better if there were more close ups of what you were doing.
@jessicagriffith32
4 жыл бұрын
Whats the average time frame it takes to install this kit? For medium to somewhat advanced skill levels?
@deankay4434
2 жыл бұрын
Who determines the spring rate in pounds for a stock front or rear installing? This videos title may not be vehicle specific but was looking for front 67-72 C10, stock height.
@Roubaixpictures
7 жыл бұрын
Where is a video for installing the QA1 rear sway bar for a Chevelle?? Thanks
@marclehmann1647
8 жыл бұрын
Hi, have an 1977 ElCo. Its called an A Body frame too, but the Kits are only till 1972, so do u have any Ideas for me, to get a Kit like this? oder i have to buy some Shocks of QA1 Lower Arms from Global and so on?
@bryanwolfinger5390
4 жыл бұрын
Hi there, is this kit or one better made for a 1977 Mercury Comet GT with a V8?
@Mrt4247
2 жыл бұрын
What's the weight difference on the A arms, from original to tubular
@789ghost342ghost
3 жыл бұрын
Please recommend full kit front and rear for 1988 Ms131 Toyota crown thanks
@limited50scla
4 жыл бұрын
For the qa1 tubular control arms/coil over kit. Do you have to get drop spindles? Or can you use the stock ones and possibly keep stock ride height?
@SummitRacing
3 жыл бұрын
Hi Mike, Can you give us a call? 1-330-230-3030? We need some additional information from you.
@glifikskils3792
3 жыл бұрын
Do you guys do installs at summit racing?
@adolfii1893
3 жыл бұрын
Everytime he says "floor jack" that horrible guitar comes lol. But 100% helpful and definitely buying these.
@denesvillareal6906
Жыл бұрын
What is the part number for the bracket adapter where the coil sits
@shanewilson2270
5 жыл бұрын
What's the difference in the qa1 trailing atm??
@rcm3851
5 жыл бұрын
I'm having clearance issues between the springs and the rear axle on my 72 chevelle. Any suggestions?
@joeymejia794
3 жыл бұрын
Damn it’s been a year I hope you figured it out man
@johnmilner7603
4 жыл бұрын
Don't forget to grease the bearings.
@michaelthomas-cq9xv
Жыл бұрын
WHY coilovers ?? What is the advantage ??
@bootyman234
4 жыл бұрын
Why aren't more control arms sold with the center mounting bar already installed... so we don't have to F*^K with them when we replace them? I mean how much really would it add to the cost?
@moisesnavarro3013
Ай бұрын
Is there a kit for 1988 monte carlo SS
@leslie7872
7 жыл бұрын
I'm planning to swap my 327 V8 outta my Chevelle into my Toyota Corolla. What do ya'll think?
@carloslego1
6 жыл бұрын
Leslie H. Love it I was thinking of doing the same to my corolla 😂😅
@johnsheetz6639
Жыл бұрын
I believe man can do anything he wants. Just please don't put it in a Ford.lol.
@juliochavez4023
3 ай бұрын
Do I need to add my original spacers back in when installing the tubular control arms?
@SummitRacing
3 ай бұрын
Thanks for your question. Give us a call at 1-800-230-3030 or email us (help.summitracing.com/Email-Us/) to talk to one of our tech experts.
@josephsmith980
2 жыл бұрын
Do you have this kit for a b body. Delta 88 coupe 1983
@rollinassassin9499
8 жыл бұрын
Is there a kit for a 1965 impala ss
@SummitRacing
8 жыл бұрын
+RollinAssassin, QA1 has a new bolt-in front coil-over kit for the ’58-’70 Impala and also offer the Stocker Star noncoil-over shocks for these cars. Unfortunately, they do not have the handling kit available for full-size cars, yet! Here are some of the part numbers for you Impala: www.summitracing.com/search/brand/qa1-precision-products/ QA1-GS507-09450D QA1-GS507-09550D QA1-GS507-09650D QA1-GD507-09450D
@gtogus712
4 жыл бұрын
No parts and parts numbers listed in the description , kit descriptions ?
@SummitRacing
4 жыл бұрын
Hi gtogus, we are so sorry about that! Here is a link to the product. www.summitracing.com/search?GroupBy=ProductName&SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=QA1%20Handling%20Suspension%20Kit%20Installation
@rjprice
7 жыл бұрын
Are these a universal fit? Will these shocks fit my 03 s10? Thanks!
@rjprice
7 жыл бұрын
What front and rear shocks would you recommend for my 2003 s10?
@rcairforceone
6 жыл бұрын
Look at the GM G-body parts for fitment in the front.
@lesterwentworth4502
8 жыл бұрын
is there a kit for a1978ford pinto ???
@christianescobar9806
7 жыл бұрын
is there a kit for a 95 Toyota pickup?
@adolphuslast1731
6 жыл бұрын
Great video
@juanmarquez7441
Жыл бұрын
Were smartest people that put that factory suspension than those guys that supposed to be make improvement but only get to ruin the smooth running of originals suspension.That ideas are for making money from the modern factories which build auto parts in this time not a big deal . They should improve the comfortable driving instead of destroying the dreams of people lived a long time ago who deserve respect for their memory
@jeanvillanueva2186
3 жыл бұрын
1968 chevelle malibu?
@rorydaddy
2 жыл бұрын
I just took these OFF my 70 El Camino, it Drove Terrible, I put the stock stuff back on, Junk Beware
@terranceroybal3222
4 жыл бұрын
Can you do a 4 link?
@SummitRacing
4 жыл бұрын
A video?
@SummitRacing
4 жыл бұрын
We have many different universal an direct fit 4-link kits. www.summitracing.com/search/part-type/suspension-link-kits Or are you requesting a video on 4-link kits?
@gtogus712
4 жыл бұрын
67 GTO ??
@SummitRacing
4 жыл бұрын
Here are the kits available for a 67 GTO www.summitracing.com/search/brand/qa1/year/1967/make/pontiac/model/gto/part-type/suspension-handling-packages?N=part-type%3Asuspension-handling-packages&GroupBy=ProductName&SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=QA1%20Handling%20Suspension%20Kit%20Installation
Пікірлер: 55