New 3D Channel: youtube.com/@Just_Print Buy X-smart 3: geni.us/y8O3lIU
@MisterkeTube
Жыл бұрын
X and Y definitely do matter on a corexy. Despite having 2 stepper working together for both X and Y movements, you still only have the printhead to move around when moving in X whereas a movement in Y still has to move the entire X gantry.
@logan_kes
Жыл бұрын
Update the firmware, mine didn’t have any issues out of the box but after the first print I did and it’s been rock solid so far. I’ve owned 16 other printers from ultimakers to Printrbot and diy machines and this is probably my favorite
@omegadeepblue1407
Жыл бұрын
Can you tell me more about your experience with the printer? please.
@AuroraColoradoUSA
10 ай бұрын
@@omegadeepblue1407 No
@meanman6992
Жыл бұрын
I just want to print cf nylon reliably with a low cost machine, I don’t care if it’s super fast!
@justice0952
Жыл бұрын
Apparently this can print cf-nylon if you buy the hotend/nozzle upgrade.
@paulbradley6271
Жыл бұрын
There is a firmware update that fixes lots of issues..
@woltea
Жыл бұрын
hey dude, when we compare the creality ender 3 v2 neo with the Creality Ender 3 s1 print quality, which one do you think is better v2 neo can print at 0.05mm layer height, s1 is 0.1mm layer height. I'm thinking of buying the v2 neo because it's both cheaper and more up-to-date.
@omegadeepblue1407
Жыл бұрын
I had seen the v2 neo is known to be less problematic than the S1.
@CreativeVlogs03
6 ай бұрын
Great demo. I just bought this printer it should arrive today. I am a little concerned with the malfunction that you got at a higher temp. Did you find out what the problem was?
@shekiba.646
3 ай бұрын
I had own QIDI tech but I frustrated.. QIDI can't any plugin to Markfrog, Rasied3D, Unimaker, etc.. wrong with QIDI??
@AK.Navy.Veteran
Жыл бұрын
The update resolves the auto leveling at start up
@trugbilddrachen
Жыл бұрын
Was the firmware updated? What does the interface log file show what happened? Being klipper there is a lot more feedback. Thanks
@AuroraColoradoUSA
10 ай бұрын
I have had their old slow X-Maker since April 2020, still works. I check for Wi-Fi when looking at 3D printers. I wipe off the print head before each print, but having to mess with a flash drive for transferring files, every single time, would be VERY annoying. Every 3D printer should have Wi-Fi by now.
@petercallison5765
9 ай бұрын
If you are making recommendations on 3D printer then you need tp look at the cost of parts. Companies that rip off their customers need to called out. I got a good deal on one of these $419 AUD but if I need a new mainboard it is $311 AUD. You can get 10 Creality boards for that price.
@joshansbridge2564
6 ай бұрын
Really useful video thank you
@QuadirIsmael-o9u
7 ай бұрын
show me sothing elsel then a benchy please
@d2diecastkustomz75
9 ай бұрын
I thought this printer can print directly from your smart phone no computer or flash drive needed. How come you didn’t go over that?
@klave8511
Жыл бұрын
Lots of mention of the speed, nothing about acceleration, is the acceleration included in the speed or is it a separate parameter? Maybe it’s automatically calculated from some other tests.
@pablosalazarcomposer
Жыл бұрын
Every Qidi review has issues. It feels like Qidi really rushed these
@_MicZ_
Жыл бұрын
The main problem seems to be the pre-sliced model on the USB stick they provide. At least in the reviews I've seen of this particular printer that was always an issue. It seems like it was sliced wrong or for a different printer.
@logan_kes
Жыл бұрын
@@_MicZ_ Exactly, I’ve got the X Smart 3 and I’ve not had a single issue. First print was perfect and everyone since. Already through 2 full spools
@bburns21
9 ай бұрын
Does anyone have a link for the frimware that he downloaded?
@edwardhunter8292
8 ай бұрын
How did you resolve the problem?
@monkeywrench1951
Жыл бұрын
Can you test the torture toaster ?
@logan_kes
Жыл бұрын
That was the third print I did on mine and it came out perfect!
@omegadeepblue1407
Жыл бұрын
@@logan_kesthanks for sharing your experience
@mehoynoy8560
Жыл бұрын
That intro montage music is FIRE
@infernape28
11 ай бұрын
Why can't you have the top on while printing PLA?
@Condamine123456
11 ай бұрын
Because of heat creep pla is a low melt filament
@Bonjour-World
Жыл бұрын
Speed means little when too much quality has been sacrificed.
@joeking433
9 ай бұрын
Yeah, speed doesn't impress me, quality of print impresses me! Quality and reliability are key.
@JezzyCrazyTV
Жыл бұрын
Worse bambulab
@Just_Print
Жыл бұрын
The missing segment of this video: kzitem.info/news/bejne/pYd8uZ5jnXeclII
@Zeltroix
Жыл бұрын
Strange option now that the BambuLabs and Creality K1s are out.
@_MicZ_
Жыл бұрын
What is strange about it ? Bambu Lab X1C and P1P have been out for a while now, they are 256x256x256 and much more expensive. Creality K1 just came out (after this printer actually) and is either 220x220x250 or 300x300x300 (Max version). This Xidi X-Smart 3 is 180x180x170 for a (much) lower price, seems like a market Bambu Lab & Creality aren't in (yet).
@Zeltroix
Жыл бұрын
@@_MicZ_ How much is the QIDI? Says out of stock with the amazon link.
@JustVlads
Жыл бұрын
$449
@ArchonLicht
Жыл бұрын
@@Zeltroix $400 at their site ATM
@joeking433
9 ай бұрын
@@_MicZ_ When did the Bambu Labs A1 Mini com out? LOL! Must have been after your post here. This printer is now $279. The A1 Mini $299 price must have scared them into a lower price!
@PrintPaintConstruct
Жыл бұрын
can I have a shoutout please?
@CB_agotchi
Жыл бұрын
Lol don't let the fact that this printer is broken out of the box deter you from buying it
@rhotix403
Жыл бұрын
Overall it looks great? Do you even look at what you print?
@sergeyirbis
Жыл бұрын
Its a fast printer, but you cannot print fast because of crappy cooling. It has enclosure, but it overheating and stop printing when you closing it. It has super board, but it broke while you tested it. Its realy impressive printer, but its total garbage. Qidi knows how make good looking printers that cannot prints. 😂😂😂
@joeking433
9 ай бұрын
Yeah, I hate device that try to titillate buyers with fancy tech at low cost but don't have the tech worked out well yet. Prusa is still the best consumer grade printer maker because they go slow and make sure everything works and will last. That's why all the print farms use Prusa. Can Bambu Labs compete? Hmmm.
@photo_n_art
6 ай бұрын
Well, Toyota Corolla is also reliable and slow... does this makes it the best car out there?
@rampart1234
Жыл бұрын
That would be an O.K. printer if it was $299 or less. On second thought $29.99.
@joeking433
9 ай бұрын
It's now $279 on Amazon. I think the $299 Bambu Labs A1 Mini scared them into lowering the price. ;)
@TuncayAyhan
Жыл бұрын
just add BED_MESH_CALIBRATE to your Gcode(startcode) in the slicer somewhere after G28.
Пікірлер: 52