Featured Glue: www.stormsure.com/stormsure-f...
-----------------------------------------------------------------------------------------------------------------
How To Repair Wellington Boots
This video demonstrates how to make a strong, waterproof and durable repair on rubber wellington boots. The boots have started to crack around the toe after years of wear and are no longer waterproof. The repair with Stormsure Flexible Repair Adhesive will make the boots waterproof again and extend the life of the boots.
1. Ensure the repair area is clean and that there is no excess shoe material in the repair area.
2. Squirt some of the glue onto another surface (this will be thrown away afterwards).
3. Mix some Stormsure Accelerator with the glue (the ratio isn't too important - just do it by eye).
3. Paint the glue onto the repair area with a paintbrush.
4. Use a small brush or just lick your finger and use that to neaten up the repair.
5. Leave the glue to cure for around 20 minutes (if you have used Stormcure Accelerator).
*pro tip: you will get the best result if you leave it to cure in a dry environment at room temperature.
If you have not used Stormcure Accelerator, leave to cure for around 12 hours (in the same conditions).
-----------------------------------------------------------------------------------------------------------------
Music by Lofi Geek on Stomp's Playlist
Instagram: / stormsure
Twitter: / stormsure
For enquiries: sales@stormsure.com
Негізгі бет Тәжірибелік нұсқаулар және стиль Quick and Easy Wellington Boot Repair | Waterproof Repair
Пікірлер: 1