I forgot to mention the Auto-calc function for the flushing volumes. Follow this link to the Bambu labs wiki and look for the "Auto-Calc Flushing Volumes" heading: wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change
@chuysaucedo7119
Жыл бұрын
Thanks for adding this
@bonovoxel7527
8 ай бұрын
That's a must to know, well done. This printer poops too much... That feature is essential, and set as it comes makes a terrible amount of plastic waste!
@Donorcyclist
8 ай бұрын
This is a great overview of the tool. No fluff, or wasted time, just the facts. I appreciate this! Thank you!
@3DPrintStuff
8 ай бұрын
Appreciate the comment, glad you liked it.
@TheLouisianaHobbyGuy
11 ай бұрын
Thanks! I've been struggling with this feature for a few days since I got it. Lots of great info here!
@3DPrintStuff
11 ай бұрын
Glad it was helpful! Thanks for the tip! You're the first person to use that feature and it really means a lot.
@Zeldalovesme
Жыл бұрын
Thank you for a quick, to the point tutorial! Just received my X1C this week and had no idea how to do the coloring and now I am confident in starting with it.
@3DPrintStuff
Жыл бұрын
Glad this video helped, welcome to the club.
@chuysaucedo7119
Жыл бұрын
A brief video, but to the point and helpful. Thanks
@3DPrintStuff
Жыл бұрын
Thanks for the comment
@boddlook
6 күн бұрын
THANK YOU! It was such a simple answer I needed but I couldn't figure it out with the help of this video😅
@3DPrintStuff
5 күн бұрын
Glad it was helpful and you found your answer :) what exactly were you looking to have answered?
@timetempest86
Жыл бұрын
awesome to the point video! thank you so much for giving us what we need so concisely.
@3DPrintStuff
Жыл бұрын
Thanks for the positive comment, glad this video was helpful.
@Nixlplix
3 ай бұрын
The height range option is exactly what I needed to make my raised text a different color!
@3DPrintStuff
2 ай бұрын
Glad you found it useful!
@melvyn99
4 ай бұрын
I am doing my first colored print. I didn't know about the various methods to paint, so you saved me time. Thanks for the video!
@3DPrintStuff
4 ай бұрын
Glad it was helpful, thanks for the comment!
@Parken26
Жыл бұрын
Very nice walkthrough🌼 you mention when you insert the stl, thatbit will adpot the first color, which is true. You can also type - on your keyboard, 2, 3 or 4 as the next step before doing anything else, that will change the color to whatever is in that position.
@3DPrintStuff
Жыл бұрын
That's really cool, I didn't know that. Thanks for the tip.
@cardsander
9 ай бұрын
Thank you!
@darhopkins5433
Ай бұрын
Excellent video. Perfect depth and pace. Greetings from Cincinnati, Ohio.
@3DPrintStuff
22 күн бұрын
Glad it was helpful
@DAYLON_
Ай бұрын
10/10 video man, thank you! Easy to follow, perfect video!!!!
@3DPrintStuff
Ай бұрын
Thanks man! I usually get comments saying the audio is too low on this video haha. Those comments get old so your comment is much appreciated, thanks!
@DAYLON_
Ай бұрын
@@3DPrintStuff audio was perfect. Lmao no issues seen. Keep up the amazing work! Learned alot and can’t wait for my printer to arrive!
@curnowornever
Жыл бұрын
Fantastic! Exactly what I was trying to find. Well explained. Thank you!
@3DPrintStuff
Жыл бұрын
Glad it was helpful, thanks for the comment.
@Thejigholeman
2 ай бұрын
i was worried that this was going to be an absolute B and a half, but it looks like bambulab really thought shit through.
@305doveridge
5 ай бұрын
A very good explanation. I will be following you more in the future. Thanks!
@305doveridge
5 ай бұрын
I was surprised to see a 40 min print jump to 14 hours.
@3DMaker-Andi
2 ай бұрын
just great, thank you!😀
@3DPrintStuff
2 ай бұрын
You’re welcome :)
@TheJimiboys
17 күн бұрын
I have a pre-made, pre-coloured object (i don't have to paint it) but I can't figure out how to change individual colours in the "prepare" section. I can definitely select the right colours in the "print plate" sectiopn as in this video, so it's not the end of the world, but I'd love to figure out how to change their colours in the prepare section so I can get an idea of what they'll look like
@3DPrintStuff
17 күн бұрын
If you click on the number to the left of the filament you can choose what the color is in your project. I think that's all you need to do.
@damptabs8710
23 күн бұрын
Thank you!
@3DPrintStuff
22 күн бұрын
You’re welcome!
@caseyhutson3572
5 ай бұрын
Awesome tutorial, thank you!
@3DPrintStuff
5 ай бұрын
Glad it was helpful!
@Anonflare
Жыл бұрын
Just wanted to say while yeah okay audio is a bit lower than normal, it's not that bad. Quiet room watching this on my phone full volume and this sounds normal
@3DPrintStuff
Жыл бұрын
Appreciate the positive comment. It's still something that should be corrected in future videos.
@tylerbell6796
2 ай бұрын
So if I want to change the black cube to all pink, can I do it without painting? Would I just change the number one slot to pink? Physically and in the software? Great video by the way! Thanks!
@3DPrintStuff
2 ай бұрын
Yeah you can do that or select the part you want to change and then hit the corresponding AMS slot on your keyboard. So hit the "1", "2", "3" or "4' key for whatever colors you have loaded in the AMS.
@tylerbell6796
2 ай бұрын
@@3DPrintStuff Big help. Thank you!
@SGTBaconese
18 күн бұрын
thank you that helped
@3DPrintStuff
17 күн бұрын
You’re welcome, glad it helped
@darhopkins5433
Ай бұрын
Thanks!
@3DPrintStuff
22 күн бұрын
Thanks for the super thanks, very appreciated
@vanhelzer22
8 ай бұрын
Great tutorial. Thank you
@kevinrivera1094
11 ай бұрын
Straight to the point. Thx
@3DPrintStuff
11 ай бұрын
You're welcome
@ReloadingQuest
5 ай бұрын
Man great video! Thanks a lot!!
@3DPrintStuff
5 ай бұрын
Glad you liked it!
@3dmagictricks
9 күн бұрын
does it show how much filament is wasted? do you think the current 489.00 A1 combo is good.
@3DPrintStuff
8 күн бұрын
Yes there will be a window in the preview tab that shows you how much filament is used in the model, flushed (wasted) and in the purge tower. The A1 combo is a great option. Haven't had any issues with mine so far. Love the AMS lite for being able to pick between my most frequently used filaments without having to load/unload every time. I don't do much multicolor printing at the moment but it's nice to have that option too.
@uncannyrecovery3980
7 ай бұрын
New sub. Thank you for the great video
@3DPrintStuff
7 ай бұрын
Thanks for the sub!
@weekendwireless
Жыл бұрын
What happens if you haven’t the ALS feature and need to change manually ?
@3DPrintStuff
Жыл бұрын
I believe you can incorporate a pause into the G-code and swap the filament manually at that layer. I wouldn't want to do this with multiple color swaps but if all you're looking for is a 2 color print that changes at a certain height then it's definitely doable. Here is a write up someone else posted on reddit: www.reddit.com/r/BambuLab/comments/10p9lfn/p1p_without_ams_change_color_at_layer_height/
@Erichev
5 ай бұрын
Does it really matter what color you choose? I mean I have pink in #2, but I just use red or orange instead of searching for the correct pink. Would that work?
@3DPrintStuff
5 ай бұрын
The color you choose doesn’t matter too much. It just makes it easier to match the project color to the color loaded in the ams. You get to choose what color gets printed when you go to print. It could be red in the project but you select pink in #2.
@TC-dk6do
Жыл бұрын
Hi, thanks for the video. I was wondering if you knew a way that I can color a section of the part that travels all the way through the part. Picture a desk plaque that has a white block with the persons name on it, The block lettering is black. I want to be able to print the black all the way thru the part not just the top layers, but have the white block around it. Is this possible that you know about?
@3DPrintStuff
Жыл бұрын
Hi TC, I don't know of any tools that do what you're looking to do... If you have modeling software you could potentially model the part as multiple bodies and color the bodies individually. Or you can model a small groove in the outline of the lettering on the opposite side to be the outline of the letters and allow for quick color application. both of those might be more effort than it's worth and require some modeling.
@TerminalOingoBoingo
3 ай бұрын
Is there any way to save a sliced model with the multi color selections applied so I can print multiple of the same model?
@3DPrintStuff
3 ай бұрын
When you save the 3mf file the color selections are saved in the file. You can also copy paste the part within the slicer if you want to print multiples at the same time.
@TerminalOingoBoingo
3 ай бұрын
@@3DPrintStuffthanks! Also, is there a way to change infill color to be 2 toned on inside? Im trying to print a miniature with a black base and yellow figure standing on top. The problem i have is that for either the base or figure my printer is unecessarily purging between infill and outside color.
@3DPrintStuff
3 ай бұрын
@@TerminalOingoBoingo The problem you're describing can be solved by using a "change color at layer" and I have a video on how to do this: kzitem.info/news/bejne/poCg2IZrpHd4hZg
@Drakanis25
11 ай бұрын
Awesome guide. Did you end up making the video on how to reduce the material use for colour prints?
@3DPrintStuff
11 ай бұрын
I did: kzitem.info/news/bejne/qrCFtX5ur3mrjag
@bradstevens4491
8 ай бұрын
Any tips on getting prints that color change multiple times in many layers to behave? Example: If you changed the model shown to have a different color in each quadrant ( an example might be: bottom 4 corners are black, pink, orange, and grey, with the top for corners being orange, grey, black, then pink). I'm having issues where I am able to see/feel the seams when the color changes and getting what appears to be layer shifts. Since the ability to use multiple colors in the same print is one of the reasons I bought my P1S, I'd like to believe there is something I am missing in the settings that is causing my issues. Thanks!
@Morcego538
Жыл бұрын
I have two filaments of different colors on the bmbu studio. How do I get back to just one? or How do I print with just one of them? One more thing. To paint the object I have to use two filaments of the same type or can I use pla basic for the object and pla cf for the painting?
@3DPrintStuff
11 ай бұрын
You can open the paint bucket tool and click "Erase all painting" that will bring you back to one color and with that part still selected you can press the numbers on your keyboard to switch between the filaments loaded in your AMS. You can use different filament types on the same part. Just be careful and check that the materials are compatible. PLA basic + PLA cf will work. Hope that answers everything.
@cheizaguirre5494
4 ай бұрын
i have a ams setup and i have black PLA in holder 1 if i want to print something only in black how can i get it to print without it printing a prime tower , my print keeps printing a tower even if im only using one color .
@3DPrintStuff
4 ай бұрын
wiki.bambulab.com/en/software/bambu-studio/parameter/prime-tower Third picture on this article has a “enable” checkbox for the prime tower that you can deselect to force the software to not use the prime tower on your specific parts.
@cheizaguirre5494
4 ай бұрын
@@3DPrintStuff thank you so much! One more question i have a print dimension issue. I’m trying to print a round part that’s 2.0 inch diameter 1 inch tall. . The part is coming out 2.000 on one side and if i check a different spot (180) it’s at 1.990 ( .010 difference) out of round. How can i get this dimensions closer to 2.0 inches diameter? I have default settings pla P1S
@robertaskey1479
3 ай бұрын
Very confusing. How do you even get the object on the work suface in the first place?
Yup, multi color printing takes ages to do color swaps. Especially when you’re using all 4 colors.
@AceFreehley
Ай бұрын
Maybe you could turn up the volume?
@3DPrintStuff
Ай бұрын
Yeah it's been mentioned a few times now. I've made an effort to check every video after this one. Thanks for the feedback.
@teearr9120
Жыл бұрын
Need a better Microphone or speak up. Thanks for the video, I'll wait till there is no other noise in the hose to rewatch
@3DPrintStuff
Жыл бұрын
Hey thanks for the feedback, I think I have this corrected on my more recent videos. I wish there was an option to increase the audio levels through KZitem but that doesn’t seem to be an option.
@kajekage9410
4 ай бұрын
How does the printer switch colors as needed?
@3DPrintStuff
4 ай бұрын
There's a filament management system called the AMS (Automated Material System) that holds 4 spools of filament. You can use up to 4 AMS's together to get 16 colors but that is way less common. For color switching the printer will cut the filament and then feed the new color. Purge a set amount of filament as waste to switch fully to the new color and then start printing again. This happens on every layer that there are different colors and does a switch for each color used so the waste can add up. Here's a video that shows that waste: kzitem.info/news/bejne/rWOFv3ifjZGLdqw
@jamesbarratt593
8 ай бұрын
You rock mate
@3DPrintStuff
8 ай бұрын
Thanks
@jamesbarratt593
8 ай бұрын
@@3DPrintStuff i wonder something. So you have letters raised on a surface. You dont want the whole letter in say green. You just want the top surface. Is that whats happening when i touch the paint bucket to the top, or is it changing all layers of the letter beneath to green ?
@Amn2k9
Жыл бұрын
I thought the select edges variant great, in my case selecting letters on a Cryptex code wheel, and while in prepare it looked perfect, then when sliced a few letters looked ok, but many others only were little or half filled with color…. I did not try all functions showed in this video at the time, but just thought it looked great in prepare, and then horrible in preview…
@3DPrintStuff
Жыл бұрын
Strange, I’ve had the multicolor prints create weird internal patterns with the colour but never just ignore outer sections in a specific colour. Did you find a solution to your issue in the end?
@Amn2k9
Жыл бұрын
@@3DPrintStuff I tried coloring the letters which came as a separate stl and then assemble with the letter wheel itself, and in preview looked ok, but result after printing did not look great. Instead I ended up printing the variant with recessed letters which turned out great.
@HayleyPayleyHuburn
Жыл бұрын
You went through all options but fill gaps!
@aleksandrassaraskinas713
11 ай бұрын
can you also control the depth of infill of the text?
@3DPrintStuff
11 ай бұрын
only if you paint it using a sphere tool. The fill tool automatically determines how deep to make the color.
@aleksandrassaraskinas713
11 ай бұрын
@3DPrintStuff great! Thank you for the tip I will try that
@TheProfesionalGamerGGN
4 ай бұрын
Any video on how to do 5 colors
@3DPrintStuff
4 ай бұрын
Hope this answers your question: kzitem.infoPBJvDYAhrJs?feature=share
@TheMoody876
Жыл бұрын
I'm having an issue with a 2-color print body is one color letters are another color. letters are extruded into the main body. main body is blue letters are white but when it makes its first color change it starts printing partially white infill even when flush to infill is off. it does this for every layer except the top layer making the white infill show through.
@3DPrintStuff
Жыл бұрын
Hard to tell just from this description but it sounds like your flushing volumes aren't sufficient between color changes so there is still some of the previous color in the nozzle when it tries to print the new color. Look up how to auto calculate the flushing volumes and try it again.
@TheMoody876
Жыл бұрын
No the slicer intentionally prints the in fill a different color.
@3DPrintStuff
Жыл бұрын
@@TheMoody876 Have you used the slicers slider bar to scroll through the sliced model and see where the slicer has said to put the colors? When you use the paint bucket on something like letters the slicer will create some weird inset geometry to make sure the 2 colors still hold onto each other if that makes sense. Maybe that's what you're seeing? Maybe try starting a new bambu studio project and repainting the model? Maybe you accidentally painted inside the model at some point? Just spitballing at this point...
@TheMoody876
Жыл бұрын
Yes I have used the slide bar and I selected to only put the colors on the countersink letters. The bottom layer and the vertical walls of the letters. I wish there was a way to post a picture on here to show it
@3DPrintStuff
Жыл бұрын
@@TheMoody876 you could post on reddit or on imgur and share the link. www.reddit.com/r/FixMyPrint/ OR www.reddit.com/r/BambuLab/ Would be good options
@chavavazquez1
7 ай бұрын
thanks
@3DPrintStuff
7 ай бұрын
You're welcome
@Nosferatu1717
Жыл бұрын
Great tutorial but I can barely hear the audio
@3DPrintStuff
Жыл бұрын
Yeah sorry about that. It has been fixed in following videos.
@bonovoxel7527
8 ай бұрын
Where are all those timelapses saved? Seriously. I haven't found'em yet. I'll probably have my first print ever timelapse and Idk where it saves them!
@3DPrintStuff
8 ай бұрын
Saves them to the micro SD card so you can remove the memory card and put it directly in your computer or you can also access them through bambu studio. "Device Tab" on the top -> "MicroSD Card" on the left
@bonovoxel7527
8 ай бұрын
Dude, thanks! :) It will be fun to back in the memories of 3 months of prints!@@3DPrintStuff
@kiritokun7142
Жыл бұрын
you got a coolplate not text* plate?
@3DPrintStuff
Жыл бұрын
Yeah I have the cool plate + engineering plate that the x1-carbon came installed with. I haven't bought a textured plate yet, but I probably will.
@kajekage9410
4 ай бұрын
How do other high end printers not have this?
@3DPrintStuff
4 ай бұрын
Most other printers just don't prioritize multi color printing. There is a lot of waste generated which probably turns off most professional users shopping at the higher end of printers.
@kajekage9410
4 ай бұрын
@@3DPrintStuff How does this handle a lot of color mixed on the same layer?
@3DPrintStuff
4 ай бұрын
@@kajekage9410 Every color change requires a purge of the nozzle that is ejected out the back of the printer. So there is wasted material on every color change.
@kajekage9410
4 ай бұрын
@@3DPrintStuff so extremely slow is the answer, lol.
@3DPrintStuff
4 ай бұрын
@@kajekage9410 Yes. It does add a ton of time to your print but that's the tradeoff for not using multiple print heads. (edit: typo)
@TheHopson
Жыл бұрын
So a multi color calibration cube will take over 5 hours??? Ouch!
@3DPrintStuff
Жыл бұрын
Color changes take a looong time... it's the price you gotta pay on this printer for a very cool feature.
@SantaDragon
11 ай бұрын
Maybe you should pump up your voice ... or at least during cutting check that you reach master volume 0 ...
@3DPrintStuff
11 ай бұрын
Yeah I’m not sure what happened to the audio on this one. Sounded good in the editing software… Wish there was an editing feature in KZitem Studio to adjust the videos volume level.
@kevinpezzi6777
6 ай бұрын
Your sound volume (relative to countless other KZitem videos) is considerably too low even with my sound set at 100%.
@3DPrintStuff
6 ай бұрын
Yes, thank you for letting me know. It has been addressed in videos published after this one. Wish I could modify it within KZitem, but they don't have this feature.
@HeyNodnoc
6 ай бұрын
That's weird thought he sounded loud 🤔
@MarcusKeeler
4 ай бұрын
LOUDER
@3DPrintStuff
4 ай бұрын
Heard
@jamesgillis8122
8 ай бұрын
volume is low
@3DPrintStuff
8 ай бұрын
yes
@oclaser
Жыл бұрын
just FYI Sound level very low,
@3DPrintStuff
Жыл бұрын
Thanks, I've had several people tell me the volume is low. I wish youtube gave me the option to increase the volume but I've made sure my following videos have better audio.
@oclaser
Жыл бұрын
@@3DPrintStuff But the visual and the every step that you show is so great that I achived my goal, and I thank you for that!
@3DPrintStuff
Жыл бұрын
@@oclaser You're welcome, I'm glad the video helped you.
@nassozeebo
5 күн бұрын
66 grams flushed for a 20 gram model 😢
@3DPrintStuff
5 күн бұрын
The unfortunate trade off of multicolor printing with one hotend. Add a bunch of the same part to the build plate and the waste stays the same so the waste to part ratio looks much better.
@blackivy011
2 ай бұрын
dude fix thine audio. SOOOO quiet
@LoneHawk
Ай бұрын
Sounds just fine to me
@blackivy011
Ай бұрын
@@LoneHawkI saw you replied to someone else and acknowledged that you would adjust the volume in future videos. So why would you do that if the audio sounds fine to you? It seems to be fine for me too on mobile. But when I play it on my computer, it’s really quiet.
@SeniorClayton
11 ай бұрын
WTF is wrong with your volume?
@3DPrintStuff
11 ай бұрын
It has been brought up before. It is fixed in future videos. Sounded fine in the video editing software but it is clearly too low.
@BanglesAU
Жыл бұрын
even with my speakers turned up full... I cannot hear you
@3DPrintStuff
Жыл бұрын
Thanks for the feedback. I will increase the volume on future uploads.
@beardeddragonheadquarters
Жыл бұрын
I can hear fine
@blessguy5330
Жыл бұрын
I can hear fine😊
@Phreekanon
8 ай бұрын
I hear it fine. Check your own settings bro
@JK31201
7 ай бұрын
1/4 up and can hear perfect
@momo_the_great6969
9 ай бұрын
Thanks. Your voice is really quiet though
@3DPrintStuff
9 ай бұрын
Thanks for the comment, sorry about that. It has been fixed on future videos.
Пікірлер: 156