Thanks! This is super helpful! Where do you buy your wheels and tires?
@Eason_RC
Жыл бұрын
Hi the wheels come with Mini z body, I’m not sure if the wheels sold alone. Tires with round surface provide minimum friction you can find them on online RC shop :)
@yGustaSadzinn
Жыл бұрын
hello bro, you send me the link for buy this bodies for the k969?? Please
@Eason_RC
Жыл бұрын
Hi you can search online for Tamiya 1/24 Mx5 model kit:)
@ferrucciosanchezz07
Жыл бұрын
Are u use lock differential?
@Eason_RC
Жыл бұрын
Yes rear is stock lock diff. 🙂
@hightorquerc
Жыл бұрын
Tidy chassis 👍
@Eason_RC
Жыл бұрын
Thanks bro 🙂
@YOOPDLRC
Жыл бұрын
Great 👍👍👍
@TheMeister308
Жыл бұрын
Ayy thanks for the help finally getting my car to slide how it should
@Eason_RC
Жыл бұрын
hi i'm glad it helps, enjoy the slide :)
@Jemoms
Жыл бұрын
Awesome, the video I was waiting for 👍
@rc-trassa
Жыл бұрын
Thank you for information!
@Mawcout
11 ай бұрын
hey man, thanks for the explanation, great build. Do you still have the 3D files for the servo horn and gear pinions still laying around ? No 3d printing or upgrade parts needed for the monoshock ?
@Mstom178
11 ай бұрын
Do I need both front and rear diff locked?
@gstmetemete
Жыл бұрын
bro can you help me please i converted my wltoys k989 to rwd but the only thing it does is keep spinning i dont know what else to do
@Eason_RC
Жыл бұрын
Hi did you have gyro installed? Is the gyro set reversed? Have you tried to increase gyro gain? Also check 4 wheels are all contact ground without lifting.
@Overdoz59
3 ай бұрын
So clean 😮👍
@ericm8167
Жыл бұрын
Where did you get the mini-q adjustable rods and ballheads?
@Eason_RC
Жыл бұрын
Hi its from taobao China. Or you can find it on Aliexpress :)
@Stiefel420
Жыл бұрын
Good Job! I am new and i want to build my Own K989 like this. DO i really need a Radio for slowing it down because mine is too fast? or is it enough to Print a Gear und Put a Resistor in?
@Eason_RC
Жыл бұрын
Yes you can slow down speed by change gear and put a resistor. But I still highly recommend to change a radio that can set EPA. Not only for slow down speed but also for set up steering angles. Because for RWD, you might have to set left and right turn EPA independently in order to have equal steering angles. 🙂
@Stiefel420
Жыл бұрын
@@Eason_RC Thank you!
@MiniBProduktions
Жыл бұрын
Nice video, super helpful and clean :) Great job! I set up my K989 just the way you did it. Since my front upper arms are shorter now the wheels barely touch the ground... Did you cur the chassis underneath the lower front arms so the suspension got room to travel?
@Eason_RC
Жыл бұрын
Hi no I didn’t cut the chassis underneath the front arm. Have you check upper/lower swing arms all move freely without any interference?
@MiniBProduktions
Жыл бұрын
@@Eason_RC yeah the swing arms have been the problem. Thanks a lot for replying! :)
@villa_fpv1682
Жыл бұрын
Buen video, el soporte de cuerpo magnético de donde lo has comprado?
@Eason_RC
Жыл бұрын
Try here m.aliexpress.com/item/1005003822065008.html
@carlosmariscal7348
Жыл бұрын
Could you send me the 3d angle of the T ?
@Eason_RC
Жыл бұрын
Sure please leave your email address and remember original designer is Zeus Garage
@nathanleon5039
Жыл бұрын
The advice for finding scale model wheel base is genius!
Пікірлер: 37