This is the quickest way to set up your ESS 5.5kW with 10kWh lithium-ion batteries. We use the COM port of the inverter with the serial cable adaptor to view and control the inverter in "Solar Power". The software is available to download here: voltaconsolar....
Simple steps:
Select your grid standard, voltage, and frequency
Select operating mode: Back up - II
Untick the feed power back to the grid
Untick the discharge battery back to the grid
The AC charger can be adjusted from the SolarPower software or using the inverter screen (see menu 07, 08, 09.
Previously, it is important to wire the Eastron energy meter to the RS485 modbus port using the cable provided in the box.
It is imperative to see the "telephone" icon on the energy meter screen, that way the hybrid inverter will be able to control the exported power from 0Watt to 5500Watt.
The last critical point is the BMS communication, there is a special cable that needs to be connected to the BMS port of the inverter. We have the option for ESS5kWh batteries and Pylontech US5000/US2000/US3000. Please pick up the right cable from the box.
If you see the error 61 means it means the inverter does not communicate with the battery, at this point you must switch off the inverter and inspect the connection.
The product is available here:
voltaconsolar....
Негізгі бет Quick Set Up - Voltacon Energy Storage System 5.5kW with Lithium Batteries. Grid-Tied Back-Up II
Пікірлер: 2