The key is pressing the escape instead of saying ok you're done once you set it up to chain print. That tells the label maker you want to keep chain printing. The escape key is how you chain print.
@carolineduchscher6768
2 ай бұрын
Quick tip: instead of backspacing all the way back to the beginning you can hold down the shift key and the backspace key and it will clear your text back to the start space. Also, another fun thing, if you do scrapbooking and have the scissors that cut wavy patterns you can line up your label in the arced part of the scissor blade and cut it so the label has rounded ends instead of sharp corners.
@stonechops
2 жыл бұрын
I’ve one of these machines and when I first used it, there was so much waste. I bought four more cartridges. Now I’m so happy these next four cartridges will last much longer! Thank you Queen Nicole! (I also didn’t know I could print two lines per strip…I’ve been cutting them down the center horizontal.)
@NicholSpohrLLC
2 жыл бұрын
Great to hear! I'm so glad I could help!
@lesliedoerhoefer6030
2 жыл бұрын
Thank you Nichol for this video! I have struggled so hard with everything that you just showed! For me, I do better by seeing in person not by reading instructions! I have this video saved! You are awesome! Thanks again!
@NicholSpohrLLC
2 жыл бұрын
Oh good! Glad I could help!
@melodiefreund2026
2 жыл бұрын
This is awesome! I didn’t even realize that I could do two rows. I need to play more.
@NicholSpohrLLC
2 жыл бұрын
Yay! I'm so glad I could help!
@bethgutzwiller5374
2 жыл бұрын
They need you to write their instruction manual. Thanks, you're a life saver.
@NicholSpohrLLC
2 жыл бұрын
Yay! Glad it was helpful!
@carriearii2675
2 жыл бұрын
Thank you so much for this tip! this will save tape and money!
@NicholSpohrLLC
2 жыл бұрын
You're so welcome!
@preetirodricks1
2 жыл бұрын
Genius☺ I've played around with the settings but didn't take note of the Chain Piecing. Yah! no more wastage 💃💃Thanks Nichol.
@NicholSpohrLLC
2 жыл бұрын
You're welcome 😊
@mrsdarcy290
2 жыл бұрын
Thank you! I never knew. The label tape is expensive so this will save some money. More more to buy stamps and dies. 😉
@NicholSpohrLLC
2 жыл бұрын
YES!!!!
@NancyLynn
2 жыл бұрын
BEST TIP EVER, Nichol.....huge THANKS!
@mikeywilkens3478
2 жыл бұрын
Thank you so much Nichol. I quit using my Brother label maker because of the waste. Again, thank you!❤️❣️❤️
@NicholSpohrLLC
2 жыл бұрын
You're so welcome!
@caroladams3949
Жыл бұрын
Great video. Been doing that for a long time. Jennifer McGuire showed that a few years ago. You made a great video to show people how to do that. Thats for showing the new ones how to do it. You save a lot of tape.
@pjolander1506
2 жыл бұрын
Thank you SO much!! I have tried to find this on other videos and can’t locate. Some of the videos are horribly long and cluttered with other information. This is the best!
@NicholSpohrLLC
2 жыл бұрын
Oh good! I'm glad it was helpful!
@kristen2439
2 жыл бұрын
I love chain printing since I learned about it
@NicholSpohrLLC
2 жыл бұрын
Yes!
@karlatipton1501
2 жыл бұрын
If I'm making a lot of labels I just hit space 3 times in between then keep typing. I'll have to try it your way since it will only let you put in so many characters my way.
@NicholSpohrLLC
2 жыл бұрын
Awesome!
@lisaseter913
2 жыл бұрын
If only this was last week. I just labelled all of my dies this past weekend. This will come in handy doing spice labels for my sister in-love.
@NicholSpohrLLC
2 жыл бұрын
I just did all my spice labels over Christmas break! Love that!
@donnawalker3910
2 жыл бұрын
OMGosh! I have this exact label maker but I quit using it for this very reason. Great video, thanks!
@NicholSpohrLLC
2 жыл бұрын
Glad it was helpful!
@carolbannister8754
Жыл бұрын
OMG! I've had my P-Touch for years and I didn't know this! (Guess it would have helped had I read the instructions lol). I just went and changed mine so it will chain print for me. THANK YOU!!!!
@c.smythe4806
2 жыл бұрын
I love this hack, Nichol! This has been the bane of my existence lately. Thank you!! ❤️
@NicholSpohrLLC
2 жыл бұрын
You're so welcome!
@sheriwhite9756
2 жыл бұрын
Thank you so much for this info. I hadn’t used mine for 2 years cause I couldn’t figure out how not to waste tape so kept using my old machine.
@NicholSpohrLLC
2 жыл бұрын
Glad I could help!
@susananglesey6219
2 жыл бұрын
Thank you!! I have 2! P touch and don’t know how to use either one of them!
@NicholSpohrLLC
2 жыл бұрын
Glad I could help!
@TannaLohouse
2 жыл бұрын
Such a great tip, I was just making a ton of labels the other day and hated all that waste, I’m sure I threw out at least ten labels worth of tape.. I have the slim brother ptouch looks kind of like a big remote. Your tip worked with this one as well
@annmarieruda8166
2 жыл бұрын
Thank you Nicol for that great tip. I have always struggled with my label maker.
@NicholSpohrLLC
2 жыл бұрын
Glad it was helpful!
@traceereiter3751
2 жыл бұрын
Thank you for this tip!! I hate wasting tape!! Your nails are super cute today!!
@NicholSpohrLLC
2 жыл бұрын
Thank you Tracee!
@traceereiter3751
2 жыл бұрын
Thank you for spelling my name right!! LOL I appreciate it 😌
@nanagriffin2887
Жыл бұрын
Thanks for this information. You did a wonderful job tilting it so we could see the label screen. I always find your videos helpful and this one certainly helped me with my labeling.
@dd-du7qt
2 жыл бұрын
Thank you very much Nichol. I have the same Brother P-Touch printer as yours and your video helped me to understand how to chain print and that pressing the escape key is required to do so. I am an electronic technician and am making many labels to organize all of my resistors and chain printing will help me to conserve tape.
@Vintage_USA_Tech
Жыл бұрын
Thank you, I have a ton of small electronics parts that I have been labeling that made me angry as heck at the wast this neat little label maker produces now I can save almost half of my tape! Such a great tip.
@Bunny_the_Rabbit
2 жыл бұрын
This is great information I can't find a menu on mine. I have a PT 1750 model and it must be a much older machine. I have had so much waste from my machine.
@robbieglynn2855
2 жыл бұрын
Oh thank goodness you showed this!!!! I literally just got my label maker and I am so loving it but having the darnedest time figuring it all out!! Thank you for the tip!! 😉👍💗
@NicholSpohrLLC
2 жыл бұрын
You are so welcome!
@hazelyoung2046
2 жыл бұрын
Thank you so much you are an angel, this will save me loads xx
@NicholSpohrLLC
2 жыл бұрын
Glad it helped!
@suesmith2353
2 жыл бұрын
Such a helpful video. Thanks for sharing with us. This will definitely help my budget !! 🙂
@NicholSpohrLLC
2 жыл бұрын
I'm so glad!
@jeanettedonahoe3293
2 жыл бұрын
Great tip, Nichol. That is such a great money saving tip. Really appreciate it. Thank you.
@NicholSpohrLLC
2 жыл бұрын
You're so welcome!
@annesmith291
2 жыл бұрын
Great tip Nichol , thank you!
@traceylandt9026
2 жыл бұрын
Most helpfil information, thank you Nichol. Take care T x
@NicholSpohrLLC
2 жыл бұрын
Thank you so much Tracey!
@virginiaellison8227
2 жыл бұрын
Thank you so much for this tip....I hate wasting so much tape....I don't have exact P-touch but hopefully mine will have this option....🥰🥰🥰🥰
@NicholSpohrLLC
2 жыл бұрын
Crossing my fingers yours will do something similar!
@lisah.6796
2 жыл бұрын
Thank you so much for this tip! I have this exact label maker and never knew how to adjust the margins!
@NicholSpohrLLC
2 жыл бұрын
Awesome! Glad it was helpful!
@pinkaboo6691
2 жыл бұрын
This is awesome!!! Thank you for sharing!
@NicholSpohrLLC
2 жыл бұрын
You are so welcome!
@norinemueller4588
2 жыл бұрын
Great tip thank you
@NicholSpohrLLC
2 жыл бұрын
Glad it was helpful!
@marygettinger7515
2 жыл бұрын
Thanks for the tips!
@NicholSpohrLLC
2 жыл бұрын
You're so welcome!
@noreenhennessy9299
2 жыл бұрын
Thank you for the great tip
@NicholSpohrLLC
2 жыл бұрын
Happy to help
@amberadams4698
2 жыл бұрын
This is wonderful! Thank you for sharing this. ❤️
@NicholSpohrLLC
2 жыл бұрын
You're welcome!
@melvinnieves1964
2 жыл бұрын
Thanks for the tip!
@NicholSpohrLLC
2 жыл бұрын
You're so welcome!
@stellaolejar9007
2 жыл бұрын
What a wonderful and most appreciated tip. Nichol, thank you for sharing your knowledge with us. Have a blessed day.
@NicholSpohrLLC
2 жыл бұрын
Thank you Stella!
@lorrainedurgee1761
2 жыл бұрын
Great video - wondered how to use the brother label maker - thanks .
@NicholSpohrLLC
2 жыл бұрын
Your'e welcome!
@grannieannie40
2 жыл бұрын
Oh thank you for this information!👏👏👏👏😊
@Annika626
2 жыл бұрын
Great tip!!! I hate waste too, this is perfect!!! Thanks so much!!
@strykermomCA
2 жыл бұрын
I'm a little late to the party, but thanks so much for this!!
@freedomofreligion3248
2 жыл бұрын
Thx so much!
@NicholSpohrLLC
2 жыл бұрын
Happy to help
@Snail_mail_4_zoe
2 жыл бұрын
Omg thank you so much for sharing this 👏🏽👏🏽👏🏽. So helpful!!
@NicholSpohrLLC
2 жыл бұрын
Glad it was helpful!
@KreationsKimberlyRae
2 жыл бұрын
Ohhh you're a doll! Thank you for this Excellent!!! Yes, please show how to print and personalize ribbon 🎀 😀
@craftyag390
2 жыл бұрын
This video was so helpful! Would you mind sharing the size and font you used for your labels? Really appreciate that you respond to our comments! Thanks!
@NicholSpohrLLC
2 жыл бұрын
I'm using Helsinki for the font and Large for the size. (Because I'm printing 2 lines of text it still prints fairly small. If I only print one line of text it's big. 😉) Hope this helps!
@annlroe
2 жыл бұрын
Hi Nicol, thank you for a great tip with the chain printing. I have had my brother label machine for about 2 years now and have wasted so much tape -so thank you again Ann 🙂
@NicholSpohrLLC
2 жыл бұрын
You are so welcome!
@nelidam8289
2 жыл бұрын
Oh my goodness!!! Thank you so much for this video! I’ve struggled to try to do this very thing and could never figure it out! Thank you, thank you!
@ChrystalsChreationsWycoff
2 жыл бұрын
I love ❤️ my Brother Label maker.
@NicholSpohrLLC
2 жыл бұрын
me too!
@giorgio.nmazza
2 жыл бұрын
Thank you. This is very helpful
@NicholSpohrLLC
2 жыл бұрын
Glad it was helpful!
@lindamitchell3871
2 жыл бұрын
Wow! Thanks
@NicholSpohrLLC
2 жыл бұрын
No problem!
@j9cardstock354
2 жыл бұрын
Thanks so much for the tip! Jeannine
@debbiepiccolo7846
2 жыл бұрын
Great tips thank you.
@itsmeamanda01
2 жыл бұрын
this was EXACTLY what I needed. THANKYOU!
@teriwilson897
2 жыл бұрын
OMG! Thank you so much! That was beyond helpful! And BTW - I am still having issues with my Patreon account with little help from support services…😕
@NicholSpohrLLC
2 жыл бұрын
Glad it helped! Teri, I just messaged you through Patreon and also sent an email to you. Let me know what you need help with! Thanks!
@teriwilson897
2 жыл бұрын
@@NicholSpohrLLC What email address did you send the message to? This is part of the issue (long story but my technical ineptness played a part in the issues I am having) and I am going in circles with Patreon Tech Support to resolve the issue but my bank account is showing my support pledge is being deducted…..😫😫
@suzanneelliott6572
2 жыл бұрын
I do not think you told them to hit the Escape key after they hit the Print key ‘twice’. I think leaving that step out was a mistake. When it says OK to Feed? you must hit Escape to continue inputting for Chain Printing.
@artcrafty8004
2 жыл бұрын
Thank you Nicole. I would get so annoyed each time I printed a label and had to waste so much tape.
@NicholSpohrLLC
2 жыл бұрын
You're so welcome!
@margarete6888
2 жыл бұрын
Awesome tips!
@NicholSpohrLLC
2 жыл бұрын
Glad you like them!
@judibradshaw1948
2 жыл бұрын
Awesome tip! Thank you 😊. It always annoys me that there is so much wasted tape!
@pjolander1506
2 жыл бұрын
Thanks Nichol. I was having problems because of the “Margin” setting, even though I had “Chain Print” selected. Do you want to update with setting the proper margin? And I think a commenter pointed out you must hit the “escape” key each time too and that probably needs emphasis. I know you’re busy and may not have time for this, but I think those 2 things would really upgrade this video! I think Brother could make this much more user friendly. Just hope the scan ‘n cut isn’t so difficult.
@bethjackson8727
2 жыл бұрын
Did you hit print twice each time.
@traceybartlam5940
2 жыл бұрын
I have a different Brother label maker and it annoys me so much, the waste is ridiculous and I’m sure it’s so you have to buy refills more often! I found identical refills so. I found cheaper non Brother identical refills in the end because I wasn’t prepared to waste so much.
@sangeetabeads7162
Жыл бұрын
I just type one word then put press space button twice and then type next word and again 2 spaces then third.... it prints like a long sentence and I cut it myself
@bdbear10
Жыл бұрын
Which size label did you use here?
@pjolander1506
2 жыл бұрын
Never mind😂. I think my label maker is newer and I think I had to do both things.
@NicholSpohrLLC
2 жыл бұрын
ok.
@PoshPaperPerfection
Жыл бұрын
thank you! All that wasted tape was driving me nuts!
@grannieannie40
2 жыл бұрын
My P-Touch doesn’t come up with margin when I press Menu, back to the drawing board. 😯
@strykermomCA
2 жыл бұрын
Hi. Not sure if you'll see this, but my P-touch doesn't bring up MARGIN when I press MENU either. Do you have some keys (a 2nd row) right above the keyboard? Is there one titled LABEL? If so, hit LABEL, then use Arrow Keys to find MARGIN. Hit OK. Then use Arrow Keys to find CHAIN PRINT. Hit OK. I hope this helps!
@madelinelittman1863
2 жыл бұрын
My P Touch is so old it doesn’t have a menu button.
Пікірлер: 122