I greatly appreciate the real-life install videos. It shows the common issues you run into and how you overcame them which is honestly helpful for most of us DIY-ers out here! It's often frustrating to watch a "perfect install" video or a "let's just set this up on a table for a demo" video and it looks all super easy and then you go to do it and end up spending 3 days and 4 trips to Home Depot. Also, one question I couldn't readily find an answer to: What is the maximum distance for running the low volt wires from the Access Ultra (or the Access Hub) to the actual lock? Thanks again for all the great videos!
@DPCTechnology
Ай бұрын
@@DominicRusso17 it's a good question, I don't know but will find out..
@MactelecomNetworks
Ай бұрын
Great video! getting ours setup this weekend
@DPCTechnology
Ай бұрын
@@MactelecomNetworks can wait to compare notes!!
@matthodgson5747
Ай бұрын
Great video! Your Protect videos have helped me tremendously and these Access videos are giving me the confidence to try what has been a daunting and complex endeavor until now.
@DPCTechnology
Ай бұрын
@@matthodgson5747 thanks for the kind feedback!!
@switz11
Ай бұрын
As I have stated in previous videos, yours are some of the best on KZitem. My only comment on this product would be it would be perfect if there was a keypad on this too. I could see this being used at Air BnB's as well as most of the entry doors on my house.
@DPCTechnology
Ай бұрын
@@switz11 that would be cool!
@rpetty
Ай бұрын
Great video. I always thought a hub was required.
@DPCTechnology
Ай бұрын
Not for the new Ultra, it's a great fit for those lower security interior doors.. I love it...
@AlexGompper
Ай бұрын
Thanks for sharing, appreciate sharing the installation process
@DPCTechnology
Ай бұрын
@@AlexGompper 👍👍👍
@switz11
20 күн бұрын
Hey Clay, you are my go-to for anything Ubiquiti. I can't find one but have you done a video on the Ubiquiti EV Station Pro? An in-depth video on setting up accounts and how to track usage would be helpful. Thanks!
@DPCTechnology
20 күн бұрын
@@switz11 I'm installing pro and regular next week 😂😂. U must have esp
@xkareshi3492
20 күн бұрын
Its unfortunate no dps input
@Atoms_Atoms
Ай бұрын
nice videos, are you open to ideas
@user-lq3ji9kb7z
Ай бұрын
Fantastic video; What electric Striker you are using or prefer. It will be interesting to hear base on your expertise which strikers (brand) work best and why same with Cables and wires ...
@DPCTechnology
Ай бұрын
@@user-lq3ji9kb7z I've used a bunch, this time I just used the UniFi one, it was fairly priced and worked.like a champ.. others were just high rated Amazon strikes or mag locks..
@user-lq3ji9kb7z
23 күн бұрын
@@DPCTechnology Thanks
@marklyon
10 күн бұрын
Can the lock output be used as a NC dry contact, or is it always powered? Not insurmountable, but we have several doors that are held locked by power from a separate system, it would be nice to easily add access to them by interrupting that power feed vs installing an extra strike, etc. Could be accomplished with a relay powered by the Unifi gear, but would be nice if it's really as simple as running a wire and splicing it in series.
@NathanSweet
Ай бұрын
Why was the large wall plate used?
@DPCTechnology
Ай бұрын
@@NathanSweet it comes with the ultra..
@NathanSweet
Ай бұрын
@@DPCTechnology I mean that I think it would be cleaner to mount the ultra on the wall without the plate. The plate is larger than the ultra and doesn't look as clean. I'm wondering if the plate is optional?
@DPCTechnology
Ай бұрын
@@NathanSweet you could go either way. It actually looks pretty good in the room.
@ColbyPerry
Ай бұрын
What about request to exit?
@DPCTechnology
Ай бұрын
It has an input for request to exit. Our door does not need it.
@philhagger1668
4 күн бұрын
@@DPCTechnology How do you release the door lock from the inside then?
@DPCTechnology
4 күн бұрын
@@philhagger1668 the door handle opens/locks/unlocks from the inside.
@dw-dj1ii
20 күн бұрын
So I'm a little confused now with the electric lock option. We have a metal frame glass door out front that doesn't have a latch (like the little thingy that you'd turn a door knob to unhook the door from the plate/frame to open it). It's just a handle and you pull or push to open the door, and it has a lock that latches when we close up for the day. We want to do an electric lock but not sure if that would work in our door situation. Would the electric lock make the lock itself turn to lock/unlock as we push the Exit button (or swipe to enter), if that makes sense..? Or would we have to use the magnetic lock option since there's no door latch thingy?
@DPCTechnology
20 күн бұрын
@@dw-dj1ii it needs an electric mag lock
@gthorpe88
Ай бұрын
Just tried to install one of these today, we used the slim plate and for some reason, we cant get it to latch in place. even by hand with the bracket just resting on the back of it!
@DPCTechnology
Ай бұрын
Our fit without issue. Maybe throw up a picture on reddit or fb and Ill take a look..
@brandonreidy6989
Ай бұрын
Does the reader require security screws to remove it from the wall or does it just pop off with a tug?
@DPCTechnology
Ай бұрын
@@brandonreidy6989 if someone wants to rip it off the wall they could, but they could kick the door down too.. it alarms when tampered with and fails to locked..
@brandonreidy6989
Ай бұрын
@@DPCTechnology agreed. More curious if that was part of the design or not. A big difference between a curious person vs. Someone determined to break in. If someone can just grab it and rip the holding tabs off vs someone having the proper tools to remove it with intention. Also says something about the build quality as well.
@DPCTechnology
Ай бұрын
@@brandonreidy6989 agreed, like any security feature I think less info online is better than more.. I touched on it but don't want to over share..
@rpetty
3 күн бұрын
I'm considering this on outdoor doors on a shop. Right now, I have keyed locks that I am sure a pickable by the right burglar. There are windows next to the door, so someone could break the glass and get in. Do you think this is appropriate in this application or am I downgrading security.
@brandonreidy6989
3 күн бұрын
@@rpetty i would not use it for that application. Get the starter kit, its still cheap as far as access control is considered
@waynenocton
29 күн бұрын
This is great and a fair price finally, but, one problem, anyone can now yank that out and put power to the strike plate with something like a battery and they’re in.. So, good for convenience, security, not so much.
@DPCTechnology
29 күн бұрын
@@waynenocton it fails locked...
@waynenocton
29 күн бұрын
@@DPCTechnology I think you misunderstood me, you can pull it from the wall and apply 12 volts and the door will open.
@DPCTechnology
29 күн бұрын
@@waynenocton You can also kick in the door... I think a thief would do that first..
@waynenocton
29 күн бұрын
@@DPCTechnology that would make a break in obvious, compared to no trace whatsoever. I do like it, and the simplicity and price though, have 4 in my cart now, soon as I manage to catch the Display Cast in stock. I use the notification thing from Crosstalk Solutions, but still can’t get it in time, they sell out quick.
@will67755
Ай бұрын
I was thinking to use this for a house side gate, noting that it's IP rated, unlike the lite, and comes with a inbuilt hub unlike the g2 reader. Then a g2 reader pro for the front door, and a g2 reader for the back door to both run off the same hub. I'm trying to think of an elegant solution to not need 2 of these on the gate (one on each side)?
@DPCTechnology
Ай бұрын
@@will67755 don't think this is the solution..
@will67755
Ай бұрын
You'd recommend using 1x g2 reader (preferable, or 2 if i need to) and 1x extra hub?
@DPCTechnology
Ай бұрын
@@will67755 I think u can get away with one
@nicholaslacovara2381
24 күн бұрын
I would respect this video a lot more if he was using anything but Ryobi tools.
@DPCTechnology
24 күн бұрын
You nailed it! The whole team was making fun of Sean when he was filming...
Пікірлер: 51