That was a great tip- and I'm a qualified mechanic of 19 years. Never thought to do it that way. On ya Lucky... Cheers from Down Under
@ml.2770
5 жыл бұрын
Spring: I will never amount to anything. Lucky: I'm gonna make this guy's whole career.
@Joesmusclecargarage
2 ай бұрын
Springs are inanimate objects and do not have speech capabilities.
@steveveness3829
5 жыл бұрын
G'day from West Australia, yep an oldie but definitely a goodie. The visual and audio delivery is much better than mine though,love it😉🙂👍👍
@erikwordal6096
5 жыл бұрын
Sweet ride. I have a 1964 4 door wagon. I put a 2004 LS1 4L60E in it for my wife😜. Get more attention than Camaros and Mustangs and very practical. Good luck with the 2 door. Erik
@richardrichard4394
Жыл бұрын
Tried it today worked awesome mostly with my 30 year old pulling on it have used chain in the past this is much better rubber gives you traction Thanks Lucky
@MJTAUTOMOTIVE
5 жыл бұрын
This thing is Rad. Great find Lucky. Cant wait to see the build on this machine. Cheers
@deatheragefarms
5 жыл бұрын
Damn Lucky, that one's useful. Nice work!
@transam4555
2 жыл бұрын
Boom chacalaka!!! That was quick and to the point thanks for the tech tip homeboy
@the_langss
5 жыл бұрын
Thanks for the Video. That was great....You made it look so easy. Great Tip.
@natey881
5 жыл бұрын
I’ve always done it with a sturdy screwdriver, thanks for sharing this belt trick.
@dcrane62
10 ай бұрын
Thanks Lucky,...I have a couple springs I need to remove and this makes it look pretty simple
@MultiDriverman
5 жыл бұрын
Looking forward to seeing more of this project!
@rayjon237
5 жыл бұрын
Needs a 65 front clip... .. love the 2 door wagons... now throw a l76 and a 6l80 in it...
@cockasorrus7475
3 жыл бұрын
Nice tip brudda! They red van is nice too!!
@j.r.m.yr.s.l.e5293
Жыл бұрын
Thanks for the great tech tip!!
@gadsdonflag4289
2 жыл бұрын
Super idea.....thanks!!!
@user-kf8qc7cx4n
5 жыл бұрын
That’s a good one. Thanks Lucky
@snake_eyes_garage
5 жыл бұрын
Nice. This should also work for the annoying brake pedal springs used on older trucks. 👍
@dixie_bill
9 ай бұрын
genius. wish id seen this trick years ago
@BOOT
5 жыл бұрын
Simple and works!
@terminalpsychosis8022
5 жыл бұрын
Masterful demonstration. Useful Protip. Method to get them annoying garter straps off too.
@larrymorgan2635
6 ай бұрын
I used wedges instead of the washers, but I like this much more.
@brianantoni1761
5 жыл бұрын
love the shit that happens at Lucky’s garage ,looking forward to this build 🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦
@chicagovasko
5 жыл бұрын
Lucky thatnks for always showing us short cuts and showing bad ass cars.
@all6t7
5 жыл бұрын
Cool tip, thanks.
@hpower8311
5 жыл бұрын
why didnt I ever think of that?! good one!
@beezo2560
5 жыл бұрын
Love the "new" wagon
@michaeljohnson404
5 жыл бұрын
Lucky goes beast mode on some punk ass springs. Your the man lucky, hope John didn’t get hit with any manhood flying off you.
@shanewright6958
5 жыл бұрын
Great tip 👍
@ricgross5815
2 жыл бұрын
OH YEAH, less than 5 minutes to do mine! You ROCK Lucky
@frankm8533
5 жыл бұрын
Damn nice little trick😎👊
@friebrid
5 жыл бұрын
going have try that thanks Lucky
@Timrsnakess
5 жыл бұрын
I also have used the male end of a seatbelt, works the same
@ulis_garage
5 жыл бұрын
Kewl! Thanks Lucky!!
@MrDhess68
5 жыл бұрын
Now that's cool! I'll remember that.
@abefrohman1759
5 жыл бұрын
Great tip
@bennyfactor
5 жыл бұрын
Legit tech tip!
@motecalevol
5 жыл бұрын
Very impressive indeed.
@gasratzcustoms
5 жыл бұрын
Too easy!!!! Badass 👍
@JDWorkshop-wn9tt
5 жыл бұрын
Good stuff
@ericfaley9019
5 жыл бұрын
Nice tip
@mcmc8496
5 жыл бұрын
That is Jam up and Jelly tight! To borrow a phrase from my 8 year old...
@VideosByAl
5 жыл бұрын
Nifty !
@mikepoint4983
5 жыл бұрын
Boom shock A lakka . Great tip
@davidjames2788
5 жыл бұрын
That is a good tip. I'd probably end up punching myself in the teeth with channel locks. But now I know better.
@davidstilwell925
2 жыл бұрын
Well, that’s too easy. Thanks
@threesquared6720
5 жыл бұрын
Hey Lucky, heard about the 6.4 quake the other day, hope all is well with you, Thoughts from NZ
@luckysgarageshow
5 жыл бұрын
David Dundas All good. Thanks
@wills705
10 ай бұрын
Cool 😎
@kennypinkerton5818
Жыл бұрын
My 56 plymouth hood springs are vertical, and between the hinge bars (one bar outside, one bar inside. Recommendations?
@garylivingston9052
5 ай бұрын
Thanks, a lot less chance of chipping up the paint that way.
@threesquared6720
5 жыл бұрын
What, no zip tie tips?
@lurch2332
5 жыл бұрын
Genius
@jeromefreer1258
5 жыл бұрын
It's all fun and games till someone loses an eye. Great tip . Peace
@raylarkin5004
5 жыл бұрын
MORE! MORE! MORE! 😉😊👍
@frederickdominguez4829
9 ай бұрын
Hey man awesome tech tip. And thank you for not saying hack. I'm sick of the woke crap. See ya lucky !!
@punkinsgarageandpaint8299
5 жыл бұрын
Would be cool to get a wrecked camaro and take the full interior and drive train and install in the wagon. I'm sure some stuff will need modified but this would show everyone that they can make this work
@notj5712
5 жыл бұрын
Ok, here's one for a tech tip. How do you remove a spring from a door hinge. I'm thinking specifically of a 65 mustang, but many are the same.
@stevenvanheel3932
5 жыл бұрын
Not J cutting torch
@notj5712
5 жыл бұрын
@@stevenvanheel3932 great, but how do you get it back in?
@stevenvanheel3932
5 жыл бұрын
Not J the opposite of a cutting torch- a welder
@stevenvanheel3932
5 жыл бұрын
Not J I’m just kidding, don’t take my advice and wreck your car lol.
@jerryclaypool2791
5 жыл бұрын
That is way better than having a pair of vice-grips lamped to the spring and pulling as hard as you can while your helper hold the hood up as far as he can. The vice-grips slip off and you elbow your helper in the eye and you both fall off the car. Just sayin'...
@TheCanadianBubba
5 жыл бұрын
Winner winner chicken dinner ! and no mangled paint !
@ipaddlemyowncanoe.7441
5 жыл бұрын
👍👍🇨🇦
@912ruckus2
3 ай бұрын
Using a brake spring tool worked far easier with new springs
@colescrustycars
5 жыл бұрын
Lucky, go grab one of your 1in ratchet straps. Just the long side. Dont even need the ratchet. Get whatever length you want, wrap it around your hand and use the hook same way your using the belt. Little more adjustable that way.
@mandocastanon2337
5 жыл бұрын
Man bad rotator cuff I've been out of work wrenching for 3 months almost cause of that the pain from it, sucks, mine is bad enough I can't even drink a beer with my right arm anymore
@hamreracing333
5 жыл бұрын
Another way to do it is use a wire and vise grips instead of the v belt
@jason-ge5nr
5 жыл бұрын
'i think i pulled a muscle' oh please, you're tough.
@396M21
5 жыл бұрын
Great tip Lucky.you are a real fart smeller....I mean smart feller.
@xozindustries7451
5 жыл бұрын
Ha, so funny, sometimes the simplest things escape us
@moparedtn
5 жыл бұрын
Dang, Lucky gets all 'roided up in a hurry when he does strenuous stuff, eh? :-)
@setevn11
5 жыл бұрын
I just use two screw drivers and pray I don't stab my face. I like this way better
@JeepMurphy
5 жыл бұрын
Luck Brevity, your new name. Paint the damn car!
@dewaynewofford6486
5 жыл бұрын
Wheres the mike drop........nice Lucky more content please it is boring here at work........
@scottpella7419
5 жыл бұрын
If I woulda' known this when I was a kid...I probably would of taken every hood spring out of the local bone-yard. Just because.....
@BustedWalletGarage
5 жыл бұрын
Last
@luckyskitchen4472
5 жыл бұрын
That's way easier (safer) than having the hinge on a vise...
@zarz3049
2 ай бұрын
Thank you American car manufacturers keep putting a cheap rods in cars 🙏
@Profabdesigns
5 жыл бұрын
Luck, for crap sake, buys $20 mic!! Holy crap dude nobody heard a thing when you 12ft from the iPhone.
Пікірлер: 83