Hi Fred I have the same soldering iron station and I like it a lot it’s very good for the price. I’ve used my soldering station with a 19v laptop power supply for a variety of soldering jobs. including soldering a earth wire to the outer braid of rg58 mil spec coax, set iron bit temperature at over 400 deg c and it coped very well with a good soldiered joint. I am very pleased with this soldering station so far it is good value for money.
@CB-RADIO-UK
2 жыл бұрын
Thanks for the info!
@oooo-xu7fx
2 жыл бұрын
1q2
@walesunt
2 жыл бұрын
Great wee soldering station very compact Fred for the money 👍
@johnward182
2 жыл бұрын
Hi Fred Great review and a lovely tool for the hobbies mate , love the content keep them coming , 🙏👍 keep safe and well
@CB-RADIO-UK
2 жыл бұрын
Thanks, you too!
@petesilvestri
Жыл бұрын
Hey Fred … new sub Thanks for the video
@CB-RADIO-UK
Жыл бұрын
Thanks for the sub!
@mindblast3901
2 жыл бұрын
1st super nice tool just run lower rate it work
@settingshadow
9 ай бұрын
what is the thickest wire gauge can this handle
@pablosoto5407
2 жыл бұрын
the shaking sensor in the handle is one with a mercury blob? regards.
@TheBronDancing
Жыл бұрын
Hi Fred thanks for the video, please what size is the power jack?
@pablosoto5407
2 жыл бұрын
there is a mercury sensor inside of the handle? Regards.
@Evilslayer73
26 күн бұрын
Hi i have a question which other model of handle are compatible with this model?
@jamesbarrett3192
2 жыл бұрын
Hi Fred I have some info on your CRT SS6900N you was talking about the talkback feature it's n09 in the function menu
@jamesbarrett3192
2 жыл бұрын
Cheers from Kentucky USA
@CB-RADIO-UK
2 жыл бұрын
Thanks James nice one.
@irishguy200007
Жыл бұрын
Can you grind the tip?
@CB-RADIO-UK
Жыл бұрын
Prob not.
@turboomni848
2 жыл бұрын
Will this display voltage in Fahrenheit too? Nice video and thanks.
@jgstevens5169
2 жыл бұрын
I had the same question too. I will check Banggood, can probably find the answer there. Thank you Fred, nice video. Keep up the great work.... And... Good luck with your project build.
@Perthshire
2 жыл бұрын
(X°C × 9/5) + 32 = Y°F
@Perthshire
2 жыл бұрын
Use this formula instead. ;-)
@CB-RADIO-UK
2 жыл бұрын
Hi. Iam not sure TBH. Banggood will know.
@Fredorando
2 жыл бұрын
Interesting name....
@salilmahadik9396
2 жыл бұрын
Is this similar to Hakko Fx 951 ?
@nickb5091
2 жыл бұрын
Would this work with a 24V 2.7A power supply?
@LeviBulger
Жыл бұрын
Definitely
@RIP123
2 жыл бұрын
Does this model come properly grounded? I've heard the other chinese stations (KSGER) aren't actually grounded at all but i did hear that the quicko models were grounded. care to confirm this for me please?
@CB-RADIO-UK
2 жыл бұрын
Hi. There is no separate ground terminal iam afraid.
@SnekSnack
Жыл бұрын
It´s DC powered. You need ground wire in AC tools with metal casing.
@amigator7789
Жыл бұрын
It's not grounded by default from factory, but you can do it by yourself easily. There is one pin on the handpiece connector which is connected to outer shell of the soldering tip (don't remember exactly which one, but it's easy to find by beeping it out with multimeter). I drilled a hole to the back of the station (just between DC socket and power switch), put banana socket there and internally connected it by wire to that pin which leads to soldering tip shell. So, when I'm soldering some basic stuff which doesn't need to have grounded tip I work with non-grounded station, and when I'm working on MOSFETs etc. which needs to have ESD safe equipment I just connect that banana socket on the back by wire which has banana jack and crcocodile clip on it to some ground point (I'm using ground in 230V power socket, in my country we have Euro sockets with earth pin sticking out so it's easy to clip crocodile clip on it).
Пікірлер: 32