It would be useful if the 'Dimmer' button on the quick patch had a '16 bit' option attached to it.
@ChamSysLtd
Жыл бұрын
We'll feed this back to our software devs.
@BrianMDPhD
4 жыл бұрын
What is the best way to patch a fixture you have the DMX legend for but is a generic brand or doesn't appear in the list?
@StefanMarkPiano212
11 ай бұрын
How would I add control individual fixtures on the faders if my fixture amount exceeds the number of faders I have on the left?
@ChamSysLtd
11 ай бұрын
You could use 'groups' for this, Groups can contain just 1 fixture, so if needed to have more than 20 fixtures on the LH faders you can use 20 single groups in group mode to gain a further 20.
@Drawzx
2 ай бұрын
The music is hella distracting but the info is there at least
@ChamSysLtd
2 ай бұрын
We're working on our refresh of these in the not too distant future (with less music ;) )
@customsoundnlighting
Жыл бұрын
Can I change which fixtures are controlled on the left faders or do I need to patch them in order of the first 20 faders?
@ChamSysLtd
Жыл бұрын
Yes - this is done via the 'head number'. Head numbers 1-20 are on the LH faders. You can update the head no's in the patch window.
@stephenkamin1345
4 жыл бұрын
How do I add copies of patched fixtures? I currently have fixtures 1 thru 6 running far stage left to center.... I wish to mirror these fixtures to stage right.
@markmcmahan8719
4 жыл бұрын
You can duplicate dmx addresses on fixtures 1 and 12; 2 and 11; 3 and 10; 4 and 9; 5 and 8; 6 and 7
@craigmack7992
2 жыл бұрын
I’ve tried patching but can’t seem to control certain fixtures on higher channel modes. They don’t turn on or they do and then can’t control them
@ChamSysLtd
2 жыл бұрын
Could you send us the manufacturer/model of the fixtures you are trying to patch and we can investiage (support@chamsys.co.uk)
@vabrownyjr
3 жыл бұрын
what visualizer are you using.
@ChamSysLtd
3 жыл бұрын
This is using MagicVis (included Free with the software).
@craigmack7992
2 жыл бұрын
Do you have to assign the dmx address on the fixture first or does the controller do that ?
@ChamSysLtd
2 жыл бұрын
You have to set the DMX address and mode on the fixtures manually. Unless your fixtures support RDM are you are using RDM autopatch on the QuickQ.
@craigmack7992
2 жыл бұрын
@@ChamSysLtd no I’m not using RDM. I actually patch first and then change the dmx address on the fixtures
@ChamSysLtd
2 жыл бұрын
@@craigmack7992 That's correct if not using RDM.
@craigmack7992
2 жыл бұрын
@@ChamSysLtd thank you
@stevienichol1008
3 жыл бұрын
Booked a one-2-one sessions and logged on but no-one turned up.
@ChamSysLtd
3 жыл бұрын
Sorry to hear this - I have raised it with our support team to be in touch with you.
@stevienichol1008
3 жыл бұрын
I can't get it to Patch anything on Mac. Is software compatible with "Big Sur'?
@ChamSysLtd
3 жыл бұрын
It is indeed - please reach our to our support teams support@chamsys.co.uk if you are still having issues patching.
@stevienichol1008
3 жыл бұрын
@@ChamSysLtd not working, can't load fixtures or create a show.
@ChamSysLtd
3 жыл бұрын
@@stevienichol1008 - On first install the heads library needs to unpack, with the program left open this can take 10 mins or so (depending on PC speed). If still not working please reach out to our support team. We are here to help - support@chamsys.co.uk
@stevienichol1008
3 жыл бұрын
@@ChamSysLtd I'm on a brand new MacPro with SSD and 96 Mb of memory, should fly through that. Really slow and whole interface looks very basic. Wondering if I've got correct software. I just get the spinning green ring around the 'Plus' button.
@stevienichol1008
3 жыл бұрын
@@ChamSysLtd It also refers to 'Fixture' files and 'Head' files. Every other company just calls them Fixtures. Why is there two? The dialogue box that comes up looks like something out of a kids game, not easy to navigate.
Пікірлер: 35