Often imitated on KZitem but never duplicated. Still the best video series on the topic
@andyguss1861
9 жыл бұрын
Hi. First off, I spent quite a while last night watching 7 or 8 of your Quincy 325 teardown and rebuild videos. For anybody interested in doing this, you have created an incredible resource. I am a little stunned in reading through your comments that this tjkslice character is razzing you all the time, and secondly, that years later you are still answering every question and trying to help everybody who posts comments. Every single person!!! I'm getting my first 325 now, it is an ROC 7 from 1957 or so, and I know I will have a lot of work to do on it, but I'm not sure I would have even wanted to take on the project at any price without having watched you explain exactly how they work and what is involved in restoring them to function properly. Thank you!
@thomwham2239
7 жыл бұрын
Hey, I just wanted to say THANK YOU for sharing your expertise in these videos. I've now rebuilt two Quincy compressors, a model 306 and a 240, using your approach. It would have been a hell of a lot more difficult without these tutorials.
@rotarycomptech
7 жыл бұрын
Thanks for the nice comment Thom! I am galad they helped you
@charleskutrufis9612
8 ай бұрын
Let me add my appreciation and thanks. This was as good as it gets.
@rotarycomptech
8 ай бұрын
Thanks Charles I appreciate your comment✌️
@ShopDad
10 жыл бұрын
Excellent series. I'm looking at buying my first two stage air compressor and trying to dig deeper for information. Wow, this was it! I appreciated the quality of work and knowledge you shared. Well done, and thank you for taking the time to document this rebuild so thoroughly.
@rogercarrico4975
5 жыл бұрын
They don't make um like they use to is a under statement. With that ole guy. She's now ready for another 50+ years of work. Terrific job rebuilding it. Not many people take the pains and care to do the job right as you do! Particularly impressed, with painting the inside of the case! Very Nice!!
@mohabatkhanmalak5314
6 жыл бұрын
Thanking you for a wonderful tutorial. I did auto mechanics diploma in my teens, learnt a lot about compressors with your tutorial.
@Steve_Just_Steve
3 жыл бұрын
Just wanted to say thanks for sharing your knowledge and nice presentation. It's not often you find a video from 2011 this well done and this useful. THANKS
@andrewhilts2437
5 жыл бұрын
Hello Dave, Thank You for the great videos. I just rebuilt the head on my 325 roc 7, and the hp discharge valve still leaks, but I just realized that I didn't lap the seats before I installed the new valve disks. I'm going to do it today and reassemble. I really appreciate you sharing your expertise.
@bscott433
3 жыл бұрын
Thanks for the videos!! I rebuilt my 325 watching these. One thing I didn't hear you didn't mention how much oil pressure you should run on a 325. Also I have the older vane style oil pump and notice that it takes 10 seconds or so to get oil pressure.
@rotarycomptech
3 жыл бұрын
18 to 20 psig Is what Quincy recommends
@madelinekumm6960
9 жыл бұрын
I'm redoing a 325-16 and these have been very helpful. Thanks for the anti seize reminder. Scraping off the old gaskets was a pain. I immersed the head casting in Esprit rust remover and it made the inside clean up much easier. Dave
@axisvaporhoningindustries4312
3 жыл бұрын
Watching your video 9 years later I am planning on a head job on a Kellogg 331 TV I just acquired I will be vapor honing the head
@DinkieDiesel
11 жыл бұрын
Fixed both valves and now it runs, sounds, acts and pumps like a new compressor. When I put my fingers over the inlet it runs almost silent and the oil pump stops reading pressure on the gauge. I can still feel a little air escaping out of the bleed hole on the tower after it shut off. Maybe the discs will wear in. Pumped to 160 before I unplugged it and did it pretty fast. Interstage operating right at 30psi now. Dave, thanks for all your help! I feel like I have a new compressor again.
@lonewulff36
13 жыл бұрын
Really enjoyed your videos and I think they were the most informative I've had the chance to ever watch on youtube!. Really learned a Great Deal that will more than likely carry over into other compressor projects I do off and on. Real Class Act and easy to watch when you know the person your watching knows all the trick from experiance!!
@mattdomenic6891
7 жыл бұрын
If this were a school project you would get an A+. Made me want a machine like this. Wish parts were more available.
@fritzhvac
13 жыл бұрын
Hey Dave !!! Man you did one fantastic job Brother !!! You have unleashed the Beast , for many more years of Service !!! You are a man very attentive to every last detail !!! Great job my Friend !!! I'm off to get Mom out of rehab , take care Dave !!!
@DinkieDiesel
11 жыл бұрын
Now you really have my attention. Your video is great and now I firmly believe you are going to save me some money too. I did as instructed. Plugged it in, let it pump up to about 60psi, pulled the plug and in about 2 seconds I got the pfffffft sound and then the air started coming out of the tower bleed hole.
@stanleylosh1899
2 жыл бұрын
I'm assembling mine tomorrow. ROC 13 Valuable videos. Thank you
@tobyw9573
6 жыл бұрын
Those are really efficient - looking valves, quite an impressive compressor!
@aaronbauer4039
9 жыл бұрын
Great video series on Quincy rebuilding. I have a couple Quincy 370's that need rebuilding and this video will help a lot. Also really like the video on the dual control installation, as I am planning to run one off of gas engine.
@johnnyjimj
9 жыл бұрын
This has got to be the best sounding compressor I've ever heard. Thanks for the great videos. If I ever find one I'll get back to them for inspiration :-)
@fastst1
12 жыл бұрын
Thanks for the vid, I purchased a good used QR-25 from a screen print shop, all the paint is burned off the output valve and discharge line. It works great, nice spin on oil filter, found a napa cross over. My unloader unloads twice though, one short spit then a longer one with a quarter second pause in the middle.
@DinkieDiesel
11 жыл бұрын
Thanks again, the o-ring is still on the brass plunger and it's in good shape. After I put it all back together but before placing the rubber diaphragm in place I pressed down on the assembly with my finger and it felt sticky. It wasn't free like I think it should be. I'll take it apart again and see what I can see.
@mowin4cash
12 жыл бұрын
Great video tutorial series! Nice to see quality craftsmanship.
@dennisgarrison7970
10 жыл бұрын
Appreciate your time in making the video.I still have 6 of these on campus (actually duplex style, so 12?), out of a total of 41 compressors total, and your video helped me in the task of working on rebuilding the valve components.Most of the Quincy units ,I have, are about 30 years old.
@jster1963
12 жыл бұрын
Great series! Watching you let me know how little I know about restoration;-) I don't have anything like that, but it was cool to see it done rite.....
@rotarycomptech
11 жыл бұрын
I would check the interstage pressure when running should be around 45 PSIG and the relief valve should set for 90 #...If it lifts when running it's typically the HP inlet valve if it lifts after shut down it's the HP discharge valve in any rate it's a problem on the HP side.. A pipe wrench will work to remove the tower the hold down can be removed easier when removed if you don't have the tool
@rotarycomptech
13 жыл бұрын
@turboslag Thanks for your nice comments! I think it would be easier to get the Quincy pump over there to get a Skyline over hear
@rthollenbeck
12 жыл бұрын
Great videos, I love the QR-25s. Work on a little myself.....but nothing this extensive yet. Thanks for some great info!
@rotarycomptech
11 жыл бұрын
Hey Chad to my knowledge Quincy doesn't offer a rebuild kit only individual parts at one time they had a head kit to rebuild the valves but i don't think they offer that any more it was called a VIP kit. The ACFM rating is around 18 SCFM. Good luck thanks for the comment
@donaldprice4183
3 жыл бұрын
Quincy model 325 air compressor was running fine when we unhooked it now about six months later and it won't pump
@rotarycomptech
13 жыл бұрын
@grizzly303 Thanks for your comment I am glad it helped you the Binks compressor is the sam as the Quincy just private labled
@rotarycomptech
11 жыл бұрын
The dual unloader towers are for continuous run operation. If it's slow to recover it's the valves.
@Veikra
8 жыл бұрын
Loved the serie. I'd like to see a rebuild video on a devilbiss/devair 447 as I just bought one. Guess I'll make a video series if I dont find any
@CESARP35
3 жыл бұрын
Excellent job Mate!!!!
@georgespangler1517
5 жыл бұрын
It's clear to see why Quincy is ahead of the rest with the valves instead of Reids,,,are they still useing valves in there new compressors?
@rotarycomptech
11 жыл бұрын
And also remember a to light of a duty cycle causes condensate build up in the crank case and rusted head and valve components
@IBRACIN
8 жыл бұрын
your videos on this are Awesome. I picked up a 325-13, I just ran it for the first time, and when it shuts off it dumps all the tank air out of the un-loader port, if I unhook the un-loader tube there is a small amount of air coming out of it.
@rotarycomptech
8 жыл бұрын
It sounds like the high pressure discharge valve is stuck open
@IBRACIN
8 жыл бұрын
+ROTARYCOMPTECH Thank you' I will open it up and take a look, so a small amount of air will always come out of the hyd un-loader valve? who do you recommend for parts?
@rotarycomptech
8 жыл бұрын
IBRACIN get your parts through a local Quincy distributor, the only time air will leak out of the hydraulic unloader is when there is an absence of oil pressure
@IBRACIN
8 жыл бұрын
+ROTARYCOMPTECH so I took apart the high pressure discharge valve , it was really gunked up, cleaned and reassembled, and that did fix the tank dumping at at very high rate. but it still leaks air from the hyd. unloader after it shuts off, to be clear I know its supposed to dump the head pressure after oil pressure goes away, and it does do that, but then it continues to slowly leak air... it looks like the sealing ring on the brass plunger is just really hard, is that a serviceable part, or do i have to buy a whole new unloader.? Thank you for your help.
@IBRACIN
8 жыл бұрын
+IBRACIN I REBUILT the valves, installed new kick off springs, and a new unloader piston, rebuilt the hyd. unloader... all is well except, after it cycles off it leaks air from the crankcase, its very small but still a leak. just wondering where to look to fix it?
@rotarycomptech
12 жыл бұрын
@fastst1 the hydraulic unloader on your air compressor should be different then mine if your pump has the oil filter the hydraulic un loader should thread into the side of the oil pump housing a quarter inch line should run up to the on loader tower I would suggest you install a pressure gauge in that quarter inch line but don't remove it from the tower stop and start see if the pressure fluctuates
@rotarycomptech
13 жыл бұрын
@lonewulff36 thanks for the nice comment Iam glad I inspired you I will be doing a new video on a 1940 tsh quincy model #310 in HD hope you will check it out :)
@rotarycomptech
11 жыл бұрын
No that's the way it's built, only the suction valves are tight.Plus The valve hold down keeps every thing tight if you know what I mean
@rotarycomptech
11 жыл бұрын
I believe the discharge spring has a bit more tension than the suction.. But Iam not 100 percent on that. Quincy has a KZitem channel they might answer that question for you, but thanks for asking
@DinkieDiesel
11 жыл бұрын
I can't win for losing. I had to replace the motor capacitors which is why the Mag starter burned up. Now I have done the head overhaul and the pop-off on the discharge side is popping off with each stroke at about 100 psi. I used a silcone spray to protect the cast iron valves. I wonder if it is sticking the disc to the valve? I noticed a slight nick on one of the discharge valves seat. I purposely put it on the big cylinder. What next? I will have a mint in this thing if I keep going.
@rotarycomptech
11 жыл бұрын
Interstage pressure should be only 45 psi your problem is the HP inlet valve. Make sure the disc is not stuck open ..Worn valve bumper or pinched between the valve body and bumper or a obstruction, carbon rust ect..The sensor is the hydraulic unloader N/O closes W/ oil pressure so yes it is operating correctly. Also check to male sure the o-ring is still on the unloader plunger.
@rotarycomptech
13 жыл бұрын
hey paul first thing try removing the quarter inch line that goes to the unloader tower when the compressor is running and has oil pressure there should not be a air signal second check to see if the unloader plunger still has the o ring on it also check to see if the piston underneath the diaphragm isn't rusted and stuck down if that's not it then the high pressure intake valve is stuck open it's not uncommon to see rust in the high pressure area causing parts to stick together
@rotarycomptech
4 жыл бұрын
Hey Jim, Sounds to me like your crankcase breather isn't working properly. There should be a 5/16 OD copper tube that runs from the crankcase opposit side of the hand whole cover To the intake portion of the head. From what you're describing it sounds like it's not venting. You can remove the line at the crank case to see if its operating some models had a tube that mount inside of the crankcase and inside of that tube was a plastic ball kind, It acts like pcv valve in a automobile. The motor stalling issue sounds more like a problem with the motor or the incoming voltage rather than the compressor but to confirm or deny there is an issue with pressure you may want to install a pressure gauge on the discharge line before it enters the tank to ensure you're not over pressurizing the compressor if you know what I mean there could be a restriction in the discharge line I think I remember you telling me this unit had the old style cushion chamber on it? Also if you have and amp meter check the amperage when the motor starts to bog down and also check the voltage it should not drop off by more than 2 or 3 Volts at the most. Good luck!!
@jimtrimble3040
5 жыл бұрын
Dave, first of all thankyou to the nth degree for doing this series. Quincy is very tight with allowing quality service manuals to be published or shared. You have saved me and thousands of others, THANK YOU sir!!!! I just purchased a 325 ROC 12 and mine has the 2 unloader valves. It also has a middle area that I havent seen on any others. It is between the pump and the motor and it has a pipe coming off the compressor head and then a square set of cooling fins and then a larger pump type looking contraption that enters into the top middle of the tank.....Do you have any clue what that could be and what it does? I am just starting to gut the compressor and start the cleaning process. If you do not have time to answer, I more than understand. YOU ARE DA MAN!!!!!!! Thanks again for all your time and courteous help
@rotarycomptech
5 жыл бұрын
Thanks for all the nice words Jim! That contraption you're referring to is what Quincy compressor named a cushion chamber, It's designed to take out the pulsation of the compressed air In hopes of making the whole compressor package quieter, A lot of the noise generated in a reciprocating compressor is through the discharge line, That pulsating compressed air entering the tank causes what's known as intank noise. The cushion chamber actually did work but there was one inherited flaw, They had a tendency to become log with oil and carbon, In some cases it would restrict the small tube that feeds the tank, There's also a relief valve located on the cushion chamber that had a tendency not to open or also become plug with carbon, I think you might know where I'm going with all this, What's your say a few of these cushion chambers exploded and therefore Quincy way back in the day discontinued to use of them, I would strongly suggest you just get rid of the thing and plum the discharge line straight into the tank hopefully there will be an opening somewhere that you can use. Good luck in the future!
@jimtrimble3040
5 жыл бұрын
@@rotarycomptech Thank you so much for replying, especially so quickly!!! Can I totally remove it from the tank and run plumb the discharge directly into the remaining hole, or is it too large?
@rotarycomptech
5 жыл бұрын
@@jimtrimble3040 As long as the whole opening isn't smaller than the discharge diameter which I believe is 3/4 inch or 1" some around their,
@jimtrimble3040
5 жыл бұрын
@@rotarycomptech Since I will be using this compressor no more that 5 hours a week, Can I just focus on keeping that chamber cleaned out or would that still be too much of a risk? If so, Could I connect the discharge tube into one of the threaded end plugs? I have one at each end of the tank about 1/2 way up from the bottom. Sorry for the quantity of questions
@rotarycomptech
5 жыл бұрын
@@jimtrimble3040 Either way will work, The cushion chamber was just found to be unsafe
@hardcooling
11 жыл бұрын
no prob. man i love rebuild things like that its badass man good job
@DinkieDiesel
11 жыл бұрын
I took the hydraulic un-loader line off of the tower and the bleed stopped leaking air. Put my finger over the copper line from the un-loader and it built up pressure. So I'm guessing the problem is the small valve at 12 o'clock on the oil pump that is fed by the copper line from the air tank and line going to un-loader tower?
@UB1081
11 жыл бұрын
I'm kind lost posting videos (first attempt) but supposedly three are uploaded. I spared you the time it takes to see pressure rise (about 4 minutes)
@DinkieDiesel
11 жыл бұрын
I'm getting deeper into it and need more help. Earlier I said air was coming out of the PRV, it's not, it's coming from the bleed hole in the unloader tower. I pulled the diaphragm and it is not cracked or leaking. Visited my Quincy dealer. He wants $180 for a Head Overhaul Kit which includes gaskets, two different sets of springs, pins and springs, discs, and an oil pressure gauge. $13 for an oil filter. That seems high. Are the kits available on the internet reliable?
@rotarycomptech
12 жыл бұрын
@mowin4cash Hey man thanks for the nice comment and for subscribing!!
@MaxkwGisKaas
10 жыл бұрын
Where do you buy your parts? Great videos BTW, I've learned a lot from them. Thanks!
@fastst1
12 жыл бұрын
@rotarycomptech Will do that and see if its different than the oil pressure gauge.
@cristiannascimento4159
4 жыл бұрын
Boa noite , tenho um compressor Quincy Illinois, estou com um problema de retorno do ar do balão, ou seja o compressor enche e o ar fica retornando e vazando no filtro , precisava de substituir as válvulas de anti retorno mas não encontro aqui em Lisboa Portugal, tem algum site onde posso encontrar? Help
@rotarycomptech
12 жыл бұрын
@fastst1 the quarter inch line that goes to the unloader tower is a air signal not oil pressure.Installing air pressure gauge in this line will help you determine if it's the hydraulic unloader is at fault or if the problem is in the high pressure suction assembly Remember don't just remove the line and install the gauge actually T into the line
@rotarycomptech
13 жыл бұрын
@carl3422 Try removing the quarter inch copper tube that goes to the unloader towers first, when the compressor is running there should not be any air present on that line if there is then you have a defective hydraulic unloader or 3 way valve depending on what vintage machine you have if you find there's no air signal on the quarter inch line when it's running then you have a valve problem or broken connecting rods but I doubt the rods are broke
@ElectroTechnics
11 жыл бұрын
Great job! It looks like a compleatly different compressor.
@sixtyfiveford
10 жыл бұрын
Nicely done. Great Video series.
@rotarycomptech
10 жыл бұрын
Thank you sir!
@pvcarmon1
12 жыл бұрын
I had a quick question, during the assembly, you mentioned and clearly demonstrated the discharge valve springs are painted white. According to the parts list, there is only one valve spring (Quincy part #7270) available for both intake and discharge valves. I recently purchased this valve spring and found it had no kind of paint or distinguishing markings.Is there a noticeable difference in size, shape, and or gauge between your white and unpainted springs is it safe to interchange part #7270?
@rotarycomptech
11 жыл бұрын
The P/N on the tool is N6664 but it doesn't have Snap-on stamped in it...Might ba a Quincy P/N
@UB1081
11 жыл бұрын
I should add that at 60 PSI the knocking starts back up but if I block the hole on the tower, the knocking will go away
@rotarycomptech
13 жыл бұрын
@worldpowerlabs Thank you very much for such a nice comment
@rotarycomptech
13 жыл бұрын
@swasey1952 The tool is made by Snap-on the P/N is N6664 I don't know if it's a Quincy or a Snap-on P/N it maybe eather or? You might try to heating the the valve cover and try turning the hold down screw clock wise with a piece of angle iron
@helihoot
11 жыл бұрын
I am considering buying a 80 gal 325-7 compressor. It was built in 1958. I saw a complete overhaul kit on ebay for $418 Is this a good way to go? PART: MOK 325-6-Q Quincy style overhaul kits have been assembled to include gasket kit, shims, piston pins (lock rings if used), piston ring kit, piston pin bushings, insert bearings (if used in original rods), main bearings, valve discs, springs, o-rings, oil seal and unloader diaphragms if required, to recondition one compressor.
@sinisterstitchescustomupho1817
2 жыл бұрын
I just picked up a 70s 325. It accumulates water in the crankcase oil very quickly, I have to wipe it out with towels by pulling side plate. I had about 3/4” of white sludge in the bottom over a 3 month period. It runs maybe 3 to 4 times a day. Can you point me in a good direction. Also thank you so much for these videos.
@rotarycomptech
2 жыл бұрын
Simply put your not running your air compressor enough and your ambient humidity is being collected in the crank case. It’s a common problem for people like yourself and me who only use their air compressor for short periods of time or not long enough to get the oil in the crank case up to temperature, after all this is what causes the moisture to flash off of the lubricant. You may try to install a crank case heater but in most cases it doesn’t work very effectively. If you don’t care about power cost and the compressor running you can always install a timer drain solenoid valve to drain the condensate from the tank and have it set to go off every couple of minutes for 20 seconds or so. In any case just like me you have to get in the habit of running the compressor up to temperature before you shut it down for a while
@sinisterstitchescustomupho1817
2 жыл бұрын
@@rotarycomptech really appreciate you answering my question especially on an old video! I was afraid that was the case. I’ll just keep an eye on it and change the oil once a month if need be. My tank leaks down over night so I drain it completely every day but it only takes 10 min to fill to 190 psi so it barely gets warm.
@Warehouse5events
11 жыл бұрын
Nice use on the glass lapping
@UB1081
11 жыл бұрын
I have a Quincy 320 - trying to setup for a friend but it has issues. It knocks a bit on startup (no air pressure) but stops once there is some pressure in the tank. Then when it gets to about 60 PSI, air starts coming out of the unloader valve. I've cleaned up the valves as best I can, new diaghram on the unloader but don't have the tools to go further. Thoughts? I have a Service Shop about 1.5 hour away.
@stanleyrodgers3375
12 жыл бұрын
Hi Dave, great vid series! You did a wonderful job documenting the rebuild process and diligently responded to commenters to provide additional info. Thanks! My question: Do you know the earliest 325 ROC number Quincy still supports with available replacement parts? Thanks in advance for your response!
@mattdomenic6891
7 жыл бұрын
Heavy Duty. Made me wish i had one.
@pvcarmon1
13 жыл бұрын
I recently acquired a "Quincy 325-15" that appears to be in "like new " condition ( reportedly used in HVAC process control). Recently, it started blowing high pressure air out through the hole in the head unloader after establishing normal oil pressure during operation. I have not dissect the problem yet. Can this be a simple case of a torn diaphragm? Thanks for your time.......
@UB1081
11 жыл бұрын
Yes - wasp had made a home in there so took it appart, cleaned it out and put a new diaphragm as the other one was leaking.
@boostv8chevy457
5 жыл бұрын
Hi . tis video is super helpfull. since 2011 still poeple reply. i need your help. i have pictures of what i have. this thing is more then 70 years old i think. i don't know where to buy and what to renew.after the system gets to 50psi. i hear and feel more coming out and less geth in at the intake filter. i like to know how to repair thia item.what to look for.Quincy is good item and expensive i see.hmm.
@patmcbride9853
8 жыл бұрын
Nice video, great commentary! I now think of you as Mr. 4th Amendment (anti-seizure).
@rotarycomptech
11 жыл бұрын
Try removing the 1/4 " controll line off the unloader tower. Should be no air pressure signal when running and maintaing oil pressure
@rotarycomptech
12 жыл бұрын
@oocheewalley Thanks for the nice comment. Whare do you live?
@rotarycomptech
11 жыл бұрын
Ok lets try to repair your compressor with out spending money on tings that are not needed.replace the diphragm or reuse the old one. Restart the compressor I think you just have a bad hydraulic unloader.. When air is escaping from the tower port remove the 1/4" controll line from the tower does this stop the escaping? If not remove the HP tower and check to see if the unloader plunger still has the O-ring on it.Please let me know if this works or not and will go from there
@rotarycomptech
12 жыл бұрын
@jster1963 Thank for the nice comment
@DinkieDiesel
11 жыл бұрын
Switched places with the tank pressure gauge and PRV. Interstage pressure appeared to register equal to tank pressure up to 100psi when the PRV popped and I unplugged the motor. Still getting pressure on the unloader line coming from the sensor on the oil pump when not running. Is that normal? No air escaping out of the intake filter inlet. That's a good thing!
@johnf1631
9 жыл бұрын
I find it simply amazing how many people you have helped, or given the "idea" to rebuild an old piece of history. I myself saw one of your videos and made it a point to go hunting for one. Night and day difference between the compressor that I had been using for the past 12 years. I found a 325-13 that ran great... however had been sitting for quite sometime. I tore it down to noting and pretty much followed your videos to the T. I am having one slight issue that I know you have addressed on here... The HP unloader tower leaks at the 1/8 npt hole. You have said that it is an issue with the valve assembly... however I am curious... how exactly? When I did my valves i started with 500 grit and worked up to 1200... extremely smooth with no imperfections at all. I really don't want to tear up the paint job... and know I could just add a check valve to resolve the issue... but I'm just curious what exactly would need done to fix this issue? The only thing I didn't replace that I probably should have was the brass plungers.... but from what i gather... that isn't my issue and I am just paranoid for no reason. A side note... has anyone told you that you sound JUST like Nicolas Cage?
@rotarycomptech
9 жыл бұрын
John F Thanks for the comment does it leak when running or off or both?
@johnf1631
9 жыл бұрын
It is only when it is off. I honestly had no idea it was leaking until it kicked on in the middle of the night. I sprayed down the very few fittings from the tank and found nothing... then I remembered seeing a video somewhere about one that had air leaking from the air filter (tower was plumbed to the top head port) obviously had a large leak. Thanks for all of the support you have given everyone.
@rotarycomptech
9 жыл бұрын
John F Than it's the HP discharge valve, if it's just slight It may just need some run time to seat the disc and seat
@EdBreitenbach
3 ай бұрын
Where is the best place to buy new valve components for rebuilding my top end of my 325?
@rotarycomptech
3 ай бұрын
At this point, I don’t think it really matters much after Atlas Copco bought the company. I think most of the parts come from China.
@jif988
9 жыл бұрын
Your videos are great and really helped me rebuild my 325. Many thanks. Mine is running great but doesn't unload after stopping. When the oil pressure drops from 20 to zero I don't hear any hiss of air to unload the head. Also there is no air coming out of the (upper) port on the hyd. unloader when the unit is running, thus no air to the diaphragms, but the unit pumps air anyway....don't know how this could be. Any suggestions? Again, thanks for sharing your knowledge and expertise with so many watchers.....JF
@rotarycomptech
9 жыл бұрын
it sounds like you have a bad hydraulic unloader when the compressor is running and has developed oil pressure the hydraulic unloader should close and remove the signal to the unloader tower diaphragm. you need an air signal to the diaphragms to unload the compressor not to load it up thanks for the comment !
@jif988
9 жыл бұрын
ROTARYCOMPTECH Thanks, Dave, I can see that the hydraulic unloader piston sticks and doesn't open and close easily. Is it any big deal to rebuild this unit? does it just come apart after driving out the roll pin? Thanks again, and keep those Quincys chugging. JF
@rotarycomptech
9 жыл бұрын
Joel Fisher Your better off replacing it
@socopolos
11 жыл бұрын
I dont know but i dont have the part that u dismantled that have D side and R side my unloader tower is connected to a part attached to the oil pump and i need to dismantle
@DinkieDiesel
11 жыл бұрын
If let it pump just for a minute it gets up to 40psi or so and the pop off valve in the head starts leaking and drains the tank. Will a new PRV resolve this or is it indicative of something else going bad, i.e. diaphragm? Should I buy a head rebuild kit online and a new PRV and do what you did in this video? Will I need the spanner wrench and huge hex for the diaphragm tower?
@rotarycomptech
12 жыл бұрын
@mojomd17 Thanks it would be interesting for me to see if the people that are teaching you how to rebuild these compressors use the same techniques as I did using locking hoans bead blasting the valve assemblies and hold downs ect.. it's not a big intrest to me it's more of a way of life. Unfortunately there's not a lot of $ in the small piston market everything is kinda gone the way of the rotary screw compressors
@DinkieDiesel
11 жыл бұрын
Just bought one of these QR-25 (325) compressors. Actually it is the second one. My dad had an old one but it has two diaphram towers on it. This one only has one. What's the difference? This newest one is a 1990's vintage. It needs some help and so do I. When I plug it in and and it starts pumping it seems slower to build pressure than it did when my company bought it new 23 years ago. Could the valves be causing this?
@Savannahjbo
3 жыл бұрын
do you still remember any specs on this , I have one from 1975, motor ( electric) went bad, had some ppl mess with it who should not have and .... now I need to know clockwise or counter clock wish and the RPM I likes so I can replace the motor .. I through a cheap 2hp 1800 rpm one on there to make sure it still works, and it will build pressure both directions , but with the pully having "fan blades " on it im sure it ment to go a certain way .... thanks
@rotarycomptech
3 жыл бұрын
There should be a directional arrow on the fly wheel itself. The older compressors with the old vane type oil pump will make oil pressure in either clockwise or counter clockwise rotation
@rotarycomptech
11 жыл бұрын
I think your problem is the HP discharge valve when shut down does air escape from the inlet filter? does your machine have a interstage relief valve?...Can you shot a video of the compressor and it's related problems? It may be helpfull...Thanks Dave
@georgespangler1517
5 жыл бұрын
Do you know much about speedaire,,,I know they was Smith and now taken over by American eagle,,,,I just bought a 1980 four cylinder compressor,,,I'm restoring,,,,she's a beast,,,
@estebangamer92
2 жыл бұрын
I repair these every day very easy
@rotarycomptech
2 жыл бұрын
I’m very proud of you!
@rotarycomptech
11 жыл бұрын
Checked out your video,hate to tell you your compressor is obsolete only a few parts are available. but I am pretty sure what the problem is after watching the vid the HP inlet valve is loose and the obsolete unloader plunger is missing the rubber seat, thats why air is leaking from the port. You need to remove the unloader tower to tighten down the valve.the unloader plunger is under the tower you may have to get creative to repair it. Also it's splash lubricated..verry old pump
@DinkieDiesel
11 жыл бұрын
Okay, bought a head overhaul kit which is just gaskets, copper valve seats, diaphragm, valve discs and springs. When I took the valve covers off I noticed rust on all but the big cylinder intake side. One discharge valve is loose. The shoulder bolt will not tighten enough to draw up the bottom of the valve to the top. Maybe that is part of my problem? I have all the parts soaking in Evapo-Rust. Hope to assemble tomorrow. Can I put a washer under that shoulder bolt so it draws up tight?
@rotarycomptech
11 жыл бұрын
Get me a part # there is a aftermarket compressor supply co that may have new aftermarket pistons
@rotarycomptech
11 жыл бұрын
Not sure on the paint code. I used a high temp engine paint that was a close match
@rotarycomptech
12 жыл бұрын
@oocheewalley The guy at the Quincy distributor was lying to you this is not a boat anchor the only concern is the oil pump which had a loss of prime issue.Looking at your video I noticed that the line that goes from the hydraulic unloader( the valve on the side) should go to the top of the unloader tower not the side. The fitting in the head needs to be plugged and you don't want to reduce the size of the discharge.& the 1/8 in fitting w/90ebo needs a oil press gauge.Have you run it yet?
@daand12
12 жыл бұрын
does it need regular 10w40 oil? same as in the car. Infact the piston is almost the same as in a car
@johns1403
8 жыл бұрын
can you give me advice on this. I just picked up a 325 ROC 104. Looks brand new but it seems the ropes that moved it dropped it and bent the crank pretty good. wobbles bad. can a machine shop straighten it. New crank is really pricey. Also there's an older Champion nearby that looks clean. Is the 325 a much better pump. I'm up for the work if its a better machine. Really a shame. Thing looked perfect.
@charlietanner6211
5 жыл бұрын
when did quincy go to oil filters on 325
@socopolos
11 жыл бұрын
thx and for the dismantling the unloader their are many types of unloader i'm asking about the one installed on the oil pump direct can you help me with this
Пікірлер: 273