Hi, im on V7.0.24.166 with boot 5615 on my Talisman Estate 2017. I have activated AA in the developer meny but since forever im trying to get the garage to update to V8 to get fullscreen AA but they keep telling me i dont have an update waiting to be installed when they connect to my car. Looking at your video that seems to be a bad idea. Do you have any way to get AA in full screen with V7 of R-link 2 8.2 inch screen? Im getting kind of tired of R-link 2 system and considering to throw it out and get something after market. Would you say its a good or bad idea? Any recommendations? Thanks in advance
@sori2067
Жыл бұрын
changing your system with an aftermarket one is not a bad idea, but you need to have a little knowledge to change it. If you think you can do it, I wish you luck.
@jameshograth3763
Жыл бұрын
@@sori2067Hi, thanks for replying. Ive seen some videos of Talisman with another dash and infotainment but cant find a good non-chines one. Do you have any knowledge of any good one? Im travling to hungary in a day and hoping they might have a good garage i can talk to about this. Or is there a way to get AA in fullscreen that you know, while standing in V7?
@sori2067
Жыл бұрын
kzitem.info/news/bejne/0bB_qI6Zn6mYZpg Try to look at this guy because he has a lot of videos about r-link, he can help you make it appear on the whole display
@salahahmed3819
Жыл бұрын
Hello my dear brother . I see you answer and help all people. God reward you . I also have a problem with this falling asleep from the screen. I have a Renault Koleos 2018. The old software was 2. I switched to Virgin 3. And then the map system does not work for me. Can you help me and can this software be installed on Koleos 2018? And not disable another program?
@sori2067
Жыл бұрын
Try one of these v3. mega.nz/folder/6ZNywAIb#PggWmvCYA4cu4r37P7zkWw
@franciscososa7640
Жыл бұрын
Hi Sori. I had installed Rlink with version 3.3, after I installed Version 9, was a disaster. I did rollback with fabric version 2.2.15. But if I want install a version 3.3.x or 7.0.24. I get errors. My boot version is 4996. I get the file log for installation: [mirror_partition][199]mirror_partition 2 [mirror_partition][213]Read from /dev/block/mmcblk0p2 [mirror_partition][248]Write to /dev/block/mmcblk0p11 [mirror_partition][275]Read from /dev/block/mmcblk0p11 [upgradeimage][998]Success recovery mirror to 0 [upgradeimage][1002]Error: Recovery partition change to 11: -159 [main_update][1188]main update error partition [2] Regards.
@sori2067
Жыл бұрын
unfortunately, you will get errors. Your boot version only supports up to software v3. you have several software versions here, try different versions of 3, maybe you will succeed mega.nz/folder/6ZNywAIb#PggWmvCYA4cu4r37P7zkWw
@GiannisKantzeas
2 жыл бұрын
Hi Sori during process to update v2 to v3 by accident i my son open the door and now i have black screen nothing working and center dashboard lighting blue and green what to do to fix it or must go to dealer i have renault megane 4 1.5cc diesel grandtour 2017
@sori2067
2 жыл бұрын
Hi. Try to see if you can do just that ... kzitem.info/news/bejne/qHl83pWgsICCdo4
@adyboy
4 күн бұрын
salut ! cred ca la alt filmulet ti-am postat ! exact aceleasi simptome cu clima si temperatura le am si eu ! radioul functioneaza .. ai vreo solutie ??! ms
@sori2067
2 күн бұрын
salut
@ridah6033
Жыл бұрын
Thank you Sori! I have a 7.0.24.166 version and 5476 boot version, do you know which is the best upgradable version for me ? Also, do you know how to activate Carplay and Android auto? I tried to activate it in developer mode but it doesn't work because it never saves my modifications when i enable it
@sori2067
Жыл бұрын
stay at 7, if you go to 8 or 9 you will ruin your whole car, because your boot system does not support
@sori2067
Жыл бұрын
After you activate Carplay in developer mode, press the POWER button until the system resets, and that way your settings will remain saved.
@28tucano
2 жыл бұрын
Hi Sori20 I have a 2017 Megane with version 2 .. can I go to the next versions ?? v.3 and v.7 ?? !!! Thanks
@sori2067
2 жыл бұрын
mega.nz/folder/lzY2BKya#g418DsxcxAHQV63I1dSJhg
@sori2067
2 жыл бұрын
Hello. Yes you can install up to version 7. Plus it doesn't support your software. I sent you the link where you can download v7. (download ZIP - top right)
@28tucano
2 жыл бұрын
@@sori2067 Hi thank you very much ... I can do this update easily or it can cause me some damage !! the software version is 2.2.19.300 4992 !!!??
@sori2067
2 жыл бұрын
You can Update very easily, all you have to do is take a USB and format it FAT32, then create a Directory on USB named R-LINK, and in that directory copy only the 3 files (* .PEM, *. LGU and * .SIG). And that's about it, then take the USB and go to the car (but first insert the USB into the car, you must always have the car engine running throughout the installation), then it asks you to be I agree with the installation and that's about it, the rest is done by the software itself.
@ricardocarvalho850
4 ай бұрын
Hello. I have a Megane 4 version 3.3.16.986 5376 and would like to know if it's possible or you recommend to upgrade to other version without bugs. Regards
@sori2067
4 ай бұрын
Hi. Normally you can only go to v7, but there is a risk that it won't work and then you kind of lost the radio. That depends only on you if you want to risk it or not.
@sori2067
4 ай бұрын
you have v7 here in case you want to risk it mega.nz/folder/lzY2BKya#g418DsxcxAHQV63I1dSJhg
@mehmetunkun
4 ай бұрын
Hi,did you try?
@sori2067
4 ай бұрын
I only tried v3 and v9
@piotruslondon
3 ай бұрын
Hello my frind . Its is possible do this update yourself , i have version V3.3 , someone told its only possible if I have Access to renault database, its true ? If not what i need to do this ?
@sori2067
3 ай бұрын
If you have boot version 5376, the system supports up to v7 software. But there is also a risk that it won't work (for some it worked with boot system 5376 to install v7 and for others it didn't work) and if it doesn't work, unfortunately you've damaged the car. So it depends on you if you take the risk or not.
@IvanRodriguez-cw2zo
Жыл бұрын
Hello Sori, could you help me please, to go to the previous version V3? It is that being a higher version V9 it does not let me and it is that it fails I do not hear the radio or the camera, the interior lights flash etc.., ¿ if you fixed it can you tell me how?, thanks
@sori2067
Жыл бұрын
Hello. kzitem.info/news/bejne/qH6Yv6yPgaySa5w - v3 to v9 Total Disaster (Boot Sistem 5092) kzitem.info/news/bejne/1oyotG13q4ygonY - Downgrade v9 to v3 ...OK but the Map stopped working. (Boot Sistem 5092) kzitem.info/news/bejne/0Zyf16umbGhilqQ - after I came from the service with another Boot System number v9 OK (Boot Sistem 5615) I managed to fix it with version 2 Standard, but the Map didn't work for me at all. mega.nz/folder/GyxkRIxK#6pJWyhRrQgWNRYfz8soz0g I struggled to keep installing different versions and still in vain, the Map stopped working. mega.nz/folder/6ZNywAIb#PggWmvCYA4cu4r37P7zkWw Then I went to the car service and the people there tried to make a Map for me, but they didn't succeed either. But they did it somehow (I DON'T KNOW HOW), but when I took the car from the dealer, I had a higher Boot System 5615 number than I had before 5092, but the Map was still black, it didn't work at all. Then I tried again to install software version 9 (exactly the version with which I broke the software in the car) and this time it worked perfectly. The only thing I can help you with is to give you the link to install version 2 for the first time, which will delete everything, and then you can install version 3 again and all the car software will work OK, except for the Map. That's all I can help you with.
@skrpan
Жыл бұрын
Hi , i have exactly the version and boot 5092 like in first seconds of video. What version is safe to upgrade? Thank you.
@sori2067
Жыл бұрын
Hi. Normally it works with v7, but I had 2 people that it didn't work with v7, so you're taking a bit of a risk if you install v7. V3 is OK.
@salahahmed3819
Жыл бұрын
I hit Software Factory. You were given to someone in the comments. After that, the screen did not open completely. Now black screen no longer works. What's the solution?😢😢😢😢
@sori2067
Жыл бұрын
kzitem.info/news/bejne/qHl83pWgsICCdo4
@sori2067
Жыл бұрын
I inform you that it did not work for me on the first try. I tried for several days and after about 3-4 days of trying, about 2-3 resets a day, suddenly the display came back and since then I haven't had any problems with it turning off.
@salahahmed3819
Жыл бұрын
I also 2 days I do it still not work
@salahahmed3819
Жыл бұрын
@@sori20675 days I do it still black screen not working 😢😢😢
@salahahmed3819
Жыл бұрын
Hello . My R-LINK is working now
@BLAZ3133
Жыл бұрын
hello sori, i have a problem, i upgrade from v3 to v9 and my rlink2 does same things ( no sound, blinkimg door leds, functions not work etc etc ) i see there in coments you post a link to downgrade from v9 to v2 but with 50/50 change the gps work or not, i try to install the v2 and all functions the sound and the leds working fine but i am unlucky and the gps not work, i have the official v2.2.19.300 now with boot version 4992, is there any solution for this to bring the gps back ? the car is megane gt iv 2017 with bose sound system and came with v3 in rlink2
@sori2067
Жыл бұрын
Hello. I have tried several times to repair the navigation and I have not succeeded. I installed v9 again, and again I came back with v2 and then v3, but still the navigation did not work. I went to RENAULT by car and told them that the navigation was no longer working, but I didn't tell them what I had done. The car stayed with them for 3 days and when I took the car back from Renault service it still worked like that, without navigation... but it had v7 installed by them without navigation of course. When I got home, I noticed that the Boot system had a higher number. Then I tried again to install v9, exactly the version with which I broke the car, and everything worked perfectly, including the navigation. I have been searching several times how to increase the number of BOOT System, but I have not found this anywhere. That's how I managed to do it with my navigation. Maybe I was a little lucky?
@BLAZ3133
Жыл бұрын
@@sori2067 ty for reply, i wake this morning and i go for a ride, when i go to the car and start up the screen is black, i did the 15 seconds power push for force restart but didnt work also disconect the battery to do power drain on the system but same, is it strange because the rlink works yesterday with official v2 and today full black
@elektra_9
Жыл бұрын
hello.. thank you for your videos i want to ask you what is the latest update i can dot it safely on the home talisman 2018 software release 3.3.16.986 boot release 5376 thanks.
@sori2067
Жыл бұрын
I think maxim v.7 but you have to take into account that with any version you install there may be failures, so you go at your own risk, no matter which version you install.
@elektra_9
Жыл бұрын
@@sori2067 okay thank you sir another question if i make the dealership update it to get 5615 can i update all the way to v9 or i need to do v8 then v9?
@sori2067
Жыл бұрын
it's good to switch from one version to another (v8 then v9, but I switched directly from v7 to v9 and it was OK)
@elektra_9
Жыл бұрын
@sori2067 okay thanks
@mehmetunkun
5 ай бұрын
Hello, which bootloader is required to install the v7 version on a v2 device via USB?thanks
@sori2067
5 ай бұрын
for v7 you need a boot of at least 51XX
@mehmetunkun
5 ай бұрын
@@sori2067 Thanks, if you have boot version 51XX or above, we can update V7 via USB. Correct?
@sori2067
5 ай бұрын
Correct
@mehmetunkun
5 ай бұрын
@@sori2067 thanks
@dawidkopec3045
Жыл бұрын
Hello I need help updating my R-Link 2 from version 2 to 7 and then from 7 to 9 can you help me??? do you have updated files? Will you share ? you can send me sptawdzine files for Renault Espace V with versions v2 v3 v7 v8 v9 can you give me instructions on how to upgrade and which version to stop with so that it would be best for me? thanks for the help 😏
@sori2067
Жыл бұрын
you can go from v2 to v3 and then to v7, without problems. mega.nz/folder/6ZNywAIb#PggWmvCYA4cu4r37P7zkWw (from this page v7 and v8 did not work for me) I sent you another site with v7 OK. during the installation, you must start the car engine, and not open the door or open the window, in principle, do not touch anything during the entire installation. How to make USB or SD Card bootable see here: kzitem.info/news/bejne/03ucnXqIjKujhYI and then see the installation here: kzitem.info/news/bejne/0Zyf16umbGhilqQ until about minute 1.30 because after that there is something else with the map, but you won't need it at the moment
@dawidkopec3045
Жыл бұрын
@@sori2067 okay thanks for the help I'm new to the Renault theme and I'm learning what about map update? do you have any update files?
@sori2067
Жыл бұрын
Hi. Unfortunately, I don't have an update file. If you no longer have the car under warranty, then it seems that you will have to buy the update file from Renault.
@dawidkopec3045
Жыл бұрын
@@sori2067 okay Thanks I thought it was possible to update maps without contacting Renault
@tarikkayki7798
Жыл бұрын
Hi Sori..i have Renault Talisman 11/2016 2.2.19.300 boot 4992..which update can i install?
@sori2067
Жыл бұрын
Hi. With your boot version 4992, you can install up to v7 Software. If you switch to v8 or v9, you will ruin your radio, and you will only have problems with it. So you can only update v3 and v7 Software.
@tarikkayki7798
Жыл бұрын
would v3 also suffice for Android Auto? could you give me link for the right software? Thank you 👍
@sori2067
Жыл бұрын
yes, it is enough for android auto mega.nz/folder/6ZNywAIb#PggWmvCYA4cu4r37P7zkWw v7 didn't work for me from this site. If you want v7 that worked, it is on this link: mega.nz/folder/lzY2BKya#g418DsxcxAHQV63I1dSJhg
@sori2067
Жыл бұрын
v8 and v9 do not try to install them as you will damage your car
@tarikkayki7798
Жыл бұрын
Thanks for the info.. I don't install v8 and v9. want to start with v3 first. Which is the correct 3.3.16.960 or 3.3.16.980?
@marcoantoniomelfi5917
2 жыл бұрын
Ai greșit, a trebuit mai întâi să aduci mașina la Renault pentru a face upgrade la versiunea 7. Abia atunci ai putut face upgrade la versiunea 9
@sori2067
2 жыл бұрын
Ai dreptate, dar nu am stiut ca nu pot face upgrade de la vers.3 direct la vers.9
@patrickvandijk9048
Жыл бұрын
Meine ist mégane hatt auch 3.3 Will gerne nach 9 hast link? Danke!
@ionutnrunu
2 жыл бұрын
Cum pot schimba sunetul motorului clasic in mod sport? Espace 2018 cu r link 2
@sori2067
2 жыл бұрын
kzitem.info/news/bejne/qLCI25WHjox3eo4
@GiannisKantzeas
2 жыл бұрын
Can you tell me how you fix it same problem!
@madeinspainouhyeah2474
2 жыл бұрын
Me too
@sori2067
2 жыл бұрын
you can try with this link: allmega.nz/folder/GyxkRIxK#6pJWyhRrQgWNRYfz8soz0g I managed to install version 2 Factory, but the map I did not succeed, to me simply did not work to install, but maybe you are lucky more and manage to install and file MAPVUI and to work to you. If you do not succeed, then at least the whole car works OK, except for the Map that will not work at
@sori2067
2 жыл бұрын
Yes. Please read everything before you start Download mm2014_factory.zip then unzip it and then tab mm2014.lgu copy it to a USB, but first you have to format the USB and then insert it in the car for about 2 minutes with the engine running. Then copy the mm2014_factory.lgu tab to the R-LINK directory on the USB. Then insert the USB back into the car and after a few seconds the installation starts on its own, all you have to do is OK or Yes. With this version you delete everything and go back to the factory settings, but version 2, but then you can install verse 3 and everything works OK, except MAP. Now you have a file 2.2.15.703_mapvui_wmap.zip You have to download this one too and then unzip it and do the same thing with the USB as before ... Form all that, then copy all the tabs that appear after unzipping to the R-LINK directory and back to the machine for installation. That should be all, but for me it took another 4-5 minutes with the installation of the Map, and in the end it was still in vain that the MAP did not work, it was only BLACK instead of the map. and that's about all you can do right now, you can do everything, even everything functional, but without the MAP. Maybe you are more lucky and the map will work for you. Good luck
@sori2067
2 жыл бұрын
I forgot to send you the link mega.nz/folder/GyxkRIxK#6pJWyhRrQgWNRYfz8soz0g
@Antunhr1
Жыл бұрын
Tnx Sori20 for all your videos. I have Espace 5 2016 year v2.2.19.300 with boot 5327. In local renault they dont wont to update software. What is a max ver to go safe. Android auto will be great but if not posible ok.
@sori2067
Жыл бұрын
Hello. I said that it works when booting the 5327 v9 system, but I have seen many people who have this boot version and have installed v9 software that their display no longer works. My opinion is to install MAXIM v7 because it works for sure, and at least the interface does not differ at all from v9.
@Antunhr1
Жыл бұрын
@@sori2067 from 2.2 to 7 or first 2 to 3 ver and then to 7
@sori2067
Жыл бұрын
yes
@konstantinkhruschev9165
2 жыл бұрын
Good afternoon! My Espace version is 2.2.19.300. Can you help me upgrade to version 9?
@sori2067
2 жыл бұрын
Hello. what boot version do you have? if you have less than 5615 boot version, I do not advise you to install ver 9 because it is not compatible, and then you will encounter a lot of problems with the car. I think the maximum version 7 will work for you (I'm not 100% sure that I never managed to install version 7, it failed the installation and returned to the previous system, it didn't change anything), but verse. 3 works 100% for you mega.nz/folder/6ZNywAIb#PggWmvCYA4cu4r37P7zkWw P.S. - Be very careful with version 9.0.34.610 as it completely deletes the system, it does not upgrade like the other versions
@konstantinkhruschev9165
2 жыл бұрын
@@sori2067 Hey! Thanks friend for the info! Have a nice day!
@manu99956
2 жыл бұрын
@@sori2067 me puedes decir como hacerlo y si puedo ya que no me deja gracias un saludo
@mohammeddeebyaseen8923
Жыл бұрын
hi i have result talisman model 2017 its on v3 can it go to 7 or 9
@sori2067
Жыл бұрын
Hi. Only up to 7 is safe, with 8 or 9 you can damage your car if it does not support the software
@mohammeddeebyaseen8923
Жыл бұрын
@@sori2067 can you help me how to do that and the link plz for talisman
@sori2067
Жыл бұрын
v7 mega.nz/folder/lzY2BKya#g418DsxcxAHQV63I1dSJhg
@sori2067
Жыл бұрын
kzitem.info/news/bejne/03ucnXqIjKujhYI
@omerkurtay4150
2 жыл бұрын
How did you do the update? Can you share the v9 update file? Please
Hi sir, thank you for the video, I have R Link with v3.3.16.946 with boot 5276, which update is safe for me? Can you give me the link for the update? I want to be able to activate CarPlay through dev mode. But right now, only Android Auto works. I’m tired buy all ELM reader, none of it works so ddt4all is quite hard for me.
@sori2067
Жыл бұрын
Hi. Maximum v7 software works with your boot version. Do not try v8 or v9 because you will suffer as I suffered and you will damage your car. As for the design, there is no difference between the v7 and the v9 (I didn't see any difference in the design, maybe the functionality is better in the v9 than in the v7, but I didn't notice that. They were the same for me). Here you can find v7 if you want to install it : mega.nz/folder/lzY2BKya#g418DsxcxAHQV63I1dSJhg After you have installed v7 and android auto still does not work, you will have to enter DEVELOPER MODE to activate it from there. This is how you prepare your USB stick for Developer Mode: kzitem.info/news/bejne/2mNtqGGEmH1zgXo ...and this is how you activate Android auto in developer mode: kzitem.info/news/bejne/pnqvyXh4jX6joJg That was about it. Good luck.
@Suhaeng
Жыл бұрын
@@sori2067 thank you very much for your help sir. Is there any specific video on how to manually update the r-link from v3 to v7 by ourself? Are there any changes in the dev mode so that I able to turn on using dev mode, not ddt4all
@sori2067
Жыл бұрын
Hello. This is how you make a Bootable USB with software for installation: kzitem.info/news/bejne/03ucnXqIjKujhYI It works the same with all software versions. And here, if you follow carefully, it shows you where you have to check to activate android auto. You just have to watch this video carefully kzitem.info/news/bejne/2mNtqGGEmH1zgXo
@Suhaeng
Жыл бұрын
@@sori2067 Hi Sir, I managed to update my R-Link to V7, but I think there’s a complication. On/off button won’t work, and likely my AC is not functioning as appear on screen. Either is wind direction or the temp, is it known issue?
@Suhaeng
Жыл бұрын
@@sori2067 Hi Sir, I just want to update my current R-Link state, maybe it will become useful for others. With the version and boot as stated before, now I’m in the version 7.0.24.166 with boot 5276, temperature not showing anything, rearview camera not working when in R gear (working fine when I check manually through vehicle setting), also the parking sensor not working (front, side), A/C indicator doesn’t seem reflect the actual state (it’s always on) and the only way to turn off R-Link is by shutdown and lock the car. Other than that everything works fine, and the update also keep my previous settings (BT paired, profile, map, etc). Is there a way to reenable again those function (maybe with dev mode)? Or should I downgrade again to 3.3.xxx, if so how can I do that and which os I need to install? Again, thank you very much for your help brother.
@spirosdamkas303
2 жыл бұрын
Καλησπερα έχω ένα renault espace 5 r link 2 και μετά από developer mode κάτι πατήθηκε κ η οθόνη είναι μαύρη μπορείς να ανεβάσεις κάποιο βίντεο για βοήθεια, ευχαριστώ
@sori2067
2 жыл бұрын
kzitem.info/news/bejne/qHl83pWgsICCdo4
@GiannisKantzeas
2 жыл бұрын
Hi Sori i update my renault megane 4 factory settings all work now except maps can you send me the link for version 2.2.19.300 thanks
@sori2067
2 жыл бұрын
mega.nz/folder/6ZNywAIb#PggWmvCYA4cu4r37P7zkWw
@bigbasswoofer
2 жыл бұрын
News?
@sori2067
2 жыл бұрын
in connection with the car currently no news, now everything works OK
@basylbasyl
Жыл бұрын
Salut Sorin ma poti ajuta si pe mine te rog frumos sa imi fac update la navigatie
@sori2067
Жыл бұрын
salut. ma intereseaza ce versiune de software ai si ce versiune Boot Sistem ai, ca asta face probleme si nu poti sa instalezi orice sistem vrei
@user-dg3nl3we4h
Жыл бұрын
Hy bro! 2016 megane it is work? 3.3.16.986 software And boot 5327 Plz send info and link with downloads. Thx. Have a nice day!
@sori2067
Жыл бұрын
mega.nz/folder/6ZNywAIb#PggWmvCYA4cu4r37P7zkWw
@berkaytaskn
Жыл бұрын
3.3.15.411 software (5092) Please ? V9
@sori2067
Жыл бұрын
if you install v7 or 8 or 9 you will experience this: kzitem.info/news/bejne/qH6Yv6yPgaySa5w ...my opinion, stay with v3
Пікірлер: 109