Had a similar issue with similar noise. End float was all within spec, but when fitting reverse / 5th gear would get a clunk. Had fitted new main shaft. What I found was the shims on the main shaft to reduce the end float was causing the reverse gear to contact the intermediate plate. To fix I had to reduce the shims on the main shaft and machine a shim on the input shaft bearing to achieve the correct end float. Noise gone. Thanks for the content and information.
@BritannicaRestorations
2 ай бұрын
Interesting!
@TheNorthernExplorer
2 ай бұрын
I had a noise with mine, I thought it was the clutch, I was getting rattling in neutral. Turns out it’s common for the teeth to chatter when cold and in neutral. The noise goes once it’s up to temperature
@Reaper4367
2 ай бұрын
'take a deep breathe', have a cuppa cha and it will come to you. :) This is exciting! Cheers for sharing Mike.
@BritannicaRestorations
2 ай бұрын
Enjoy!
@jamescaron6465
2 ай бұрын
Hey Mike, the next time you’re looking for sockets try Tekton. You can get a 38 mm deep impact socket for like $14 US. And they have a great warranty policy just take a picture of the broken tool. I’ll upload it and they’ll send you a new one in a couple days.
@BritannicaRestorations
2 ай бұрын
I have Tekton ratchets
@jamescaron6465
2 ай бұрын
@@BritannicaRestorations cool. I’ve gotten to become a big fan of their tools.
@billsoucess2448
2 ай бұрын
About 1800km so far
@odhranquinn8992
2 ай бұрын
Tekton make great tools. Bought some about 6 years ago. Still perfect
@jamescaron6465
2 ай бұрын
@@odhranquinn8992 And not alot of money either! Their chromes are as nice as anything I have and their impacts take a beating with no problems.
@Pedrofidalgo
2 ай бұрын
23:13 To change from td5 to tdi its easy you just need the to buy the inputshaft(TUD102580), but from a tdi to td5 it need machining, because of the OD and height of bearing in the front plate of housing(there are no shaft for td5 with "tdi bearing" ). i thing the v8 have less or more teeth, and the layshaft is different too. I have a td5 r380 on my 300tdi, and i just have to change the input shaft and bellhousing. To change the input shaft it's tricky, i made the lay shaft lose, to make space to the input shaft pass on the 4th sincro ring(without taking the everything apart)
@barbellbell
2 ай бұрын
Hi Mike. Nothing to do with this video. But if you could remember probably not a will ago..I asked a question about a disco 1 changing a automatic box for a manual. And changing a electronic diesel pump for a manual pump .we'll I went with my intuition and learning of you channel I have done it.i bought a ashcroft box .a pump and had it checked off diesel bob of England and its a OK.thats why we look and learn off channels like yours.keep up the good work Mike what will we do when electric takes over.fn knows.many thanks my friend.
@BritannicaRestorations
2 ай бұрын
Glad it all worked out!
@user-qr6vv7lk7r
2 ай бұрын
There is nothing worse than someone who is playing the gearbox when they know absolutely nothing about the chatter that commonly occurs in the gears. Japanese fixed it with a little tin plate with a spring on it so the girls were constantly intention but not so for the British manufacturers
@BritannicaRestorations
2 ай бұрын
I think the extension housing bearing spinning in the housing didn't help
@berndeikers8924
2 ай бұрын
well i am not shure if it helps, but maybe it would be nice to know how much miles the gearbox ran and if someone overhauled the gearbox and what changes exactly have been made and what not. this would be my starting point. from my novice point of view this ratling noise comes from excesive play of the shaft. but where - the shaft itself, maybe some bearings are out of specs. which is not something new. this looks more and more like a crime scene - CSI britannic restoration- lets see how it continues
@donbar6480
2 ай бұрын
👍🏻
@jameskerr5756
2 ай бұрын
What are the marks in the gear teeth at 18.57? Maybe that's what was partly on the drain plug magnet? No idea what I'm looking at in terms of noise so no help, but I'm sure you'll have it up and running as it's supposed to be in no time.
@BritannicaRestorations
2 ай бұрын
JP measured up the rear housing and the housing for the bearing is 0.001 oversize which is why the bearing fell out - could be the source of the problem
@sweed58
2 ай бұрын
Could just be very slight wear on tapered bearing
@BritannicaRestorations
2 ай бұрын
Hardly done any miles
@iceman9678
2 ай бұрын
As an amateur KZitem mechanic - could it be a teeth alignment issue?
Пікірлер: 32