I used this video step by step and I managed to do this by myself(no electrical/mechanical bg) and saved the money of letting someone do it for me, you will need a good toolbox with different screwdrivers/screw heads, t20 , t25 , and i think i used a t30 too. You will need a plier to hold a small screw head to get to the screws on top of the outer AC vents, just like the video. My CAS module was malfunctioning which made the clicking sound on the fusebox, made that the backlights stayed on, and the car would struggle or not start at all in the heat, got random warning lights that made no sense, and also if you wiggle your key fob while inserted, the car would turn off. In my case I got the CAS out, and I let a technician take a look at the chip, he told me that there was nothing wrong, so I did a prayer on it and installed the CAS again, the car started normally with no problems what so ever, no warning lights, as if my car was new. Crazy how such a small box could have such an effect on a car. So my theory is that maybe that technician cleaned the chip, or that the plugs were somewhat loose and by plugging it back in it fixed my problem, so try these things out before you buy a new cas, Extra: on ebay there are many services that program a working CAS module to your car, you just have to ship them the old CAS module and they will replicate the code on the working one. They do it for 100 - 300 bucks. Way cheaper than the 2000 dollars at the agency, you have to look for the ones that already have working cas modules and only need the old one. P.s Unplug your battery before you mess with your dash I really hope this helps someone
@geoffreyrawlings9736
6 ай бұрын
Hi I'm taking a mini dash out air bag blown very helpful Thanks.
@giorgos7six
8 ай бұрын
The creaking sound of the dash while driving is driving me crazy, its totally unbearable. I must do something about it and your video is very helpfull on how to unbolt it, but not sure what to do after its out... maybe fill in some pads to make it more solid after bolting it?
@emadfarid5082
17 күн бұрын
Must make sure it’s clipped in all the way back where it meets the windshield
@giorgos7six
17 күн бұрын
@@emadfarid5082 What exactly do you mean by "clipped" in?
@emadfarid5082
17 күн бұрын
@@giorgos7six First of all thank you for the video was definitely helpful as I was taking too much stuff off until I saw the video helped me to short cut and got the cas out. What I mean is all the way back where the windshield meets the dash “area” the dash popped out when I was talking apart. So I’m saying if that part of the dash doesn’t get pushed back in and clipped the right way it maybe causing the creaking sound you are experiencing.
@giorgos7six
17 күн бұрын
@@emadfarid5082 i just noticed that the creaking sound is more noticeable when i slam the dash with my fist, both on its left (behind the revs meter) and right side. Its also more evident in harsh/bumpy roads.
@jdm199422
2 ай бұрын
What kept messing up your cas module?
@MikanikMike
2 ай бұрын
@@jdm199422 the ground cable that led from the negative battery terminal to the body was corroded and rusty. I noticed when i kept trying to start the car and seeing smoke from the battery area. The cas got fried from all the times i tried to jumpstart my car with the ground cable being bad
@uTheJoKeR
2 ай бұрын
@@MikanikMike does the CAS always get messed up when the ground goes bad?
@MikanikMike
2 ай бұрын
@@uTheJoKeR not necessicarily, usually its from a power surge that burns some of the connections in the cas module. The cas acts as a bridge bewteen the key ignition and the starter actualization process. Alot of electrical pathways that can get overloaded when there are power issues or jumpstarting the car with current electrical wiring problems like i personally ran into with my ground being bad
@uTheJoKeR
2 ай бұрын
@@MikanikMikeI have the same issue with mine. Apparently there is power to the trigger wire and to the new motor I just put in. But my ground is bad so I’m going to replace it and see what happens. My battery is probably bad now and can’t be saved. Mine is an R60
@nsteng17
Ай бұрын
Same car. After ignition on press again to start engine no crank and dashboard light gone off.. is it symptoms of bad CAS Module..
@nsteng17
Ай бұрын
Same car same as video description.Press push start button. No crank no start , battery new, got 1 sound clicks...is a Bad. CAS Module..thanks
@carlosbanegas7577
2 ай бұрын
thank you very much
@mundygamez3254
Жыл бұрын
Video quality
@MikanikMike
Жыл бұрын
Yea i know, trying to save a 1080p 24 minute video was too large of a datafile, had to make a sacrifice for the greater good 😞😅
@LonleyJulian
7 ай бұрын
Didn't even remove the freaking dash... fouking a.
@kathyodaniel4044
Жыл бұрын
I have a r55 no power no nothing😢 can you give me suggestions?
@MikanikMike
Жыл бұрын
Could be a multitude of possibilities, check battery, starter and alternator, ensure that engine is grounded properly, test this by placing the red cable on positive battery terminal(red) and black cable(-) on the actual engine block while trying to jump the car. If this method starts the car that means ur ground wire isnt connected correctly, if all these steps fail, then i would check the cas module.
Пікірлер: 22