I’ve watched 5 other DIY videos. This was by far the best one. Laying out the disassembled parts in the order they came apart was a great tip. Thanks for sharing.
@juli12345istRecorsi
4 ай бұрын
Did my struts today and this video really helped. A few tips from my side: - make sure your spring compressor is set up in a way that lets you reinstall the parts on the new struts. Mine was in the way and i had to reposition it. - when reinstalling the strut it was sitting way lower than the rest of the suspension. I removed the sway bar link on one side to lower the suspension. - the lower bolt should be torqued at ride height. I started the bolt, then put a jack under it and raised it to ride height (even better if you measure that height before jacking up the car). This is also the time to reinstall that sway bar link All in all a pretty easy job if you take your time
@stevendupper1573
Жыл бұрын
Greta in-depth video. Thank for this! I was confused because at first I thought I had to remove the mount bolts from inside the car like some vehicles are. One of the easiest set of struts I’ve done.
@OMF911
4 ай бұрын
Thank you Mike ! There is a small mistake. The tightening of the wheel bolts according to MINI's specification is 140NM and not 122NM. Amazing video!
@fcpeuro
4 ай бұрын
Thanks for the info!
@chilewithlime
Жыл бұрын
Can y’all please do a F56 mini coilovers install in the near future! 🙏🏼
@michaelvanna8982
Жыл бұрын
Thanks cool Mike❤
@taetaebts2372
Ай бұрын
Can you explain which spring compressor that is?
@michaelvanna8982
Жыл бұрын
If it will be a lowering spring will the torque specs like the retaining nut on the strut/spring be the same? Tnx
@GraysonVsLife
9 ай бұрын
Are you not supposed to torque the lower strut bolt to spec when its under load?
@kevinnjau3582
8 ай бұрын
You are correct
@V.Galeana
Күн бұрын
Nice video bro where do you get your spring compression tool please let me know @fcpauto
@cooldude5611
Жыл бұрын
I see Hidalgo, i watch
@papadajnia268
Жыл бұрын
Big bolt is realy 160 torque nm ???? Thats a lot for aluminium??
Пікірлер: 17