This helped me a lot.. Thank you sir for recording this video
@wanderlustadventures8850
Жыл бұрын
Your explanation is better than the one from racetorx! Thank you Markus 🙌
@everythingtenere
Жыл бұрын
Thanks bud
@sissou.6817
Жыл бұрын
I mounted mine yesterday! The benefit is obvious !
@NomadSweden
Жыл бұрын
Great explanation with the sketch :) It's clear as körvspad.
@everythingtenere
Жыл бұрын
Körv för hela slanten. På onsdag blir det test av däck och shift support i enfurospåren, skulle dock behöva hjälmlampa 🫣. Träningen börjar 17, så lär bara bli en snutt
@elvispusley3515
Жыл бұрын
I have had one for 9 months and I think it may help during an impact to the shifting rod
@Abdal-RahmanI
Жыл бұрын
In case of a crash, now you can break not just the shift shaft, but also a couple of side engine bolts! Epic.
@everythingtenere
Жыл бұрын
Haha, naa.. super slim risk
@762851
Жыл бұрын
ok, finally good explanation of what it really is :) thanks mate, cheers!
@everythingtenere
Жыл бұрын
😊 glad I could be helpful hehe
@scotty3630
Жыл бұрын
maybe a good idea. never thought about it 👍
@everythingtenere
Жыл бұрын
For sure, but Not really needed for the T7 maybe. Other bikes/brands have more issues where this gadget helps a lot more. But still, you do feel a better and crisp gear change (in my mind)
@BikerGirlTraveler
Жыл бұрын
Did you inow that according to studies, when people were asked to tighten something to a given torque, the vast majority of times (about 92%, if I remember correctly) people over torqued the bolt. And that was true regardless how how experienced the person was. From DIY weekend mechanic to professional and seasoned mechanics. And the problem is accumulative. See when you torque a bolt to whatever spec the manufacture gives, you put the bolt under tension. The bolt slightly stretches and generates enough fiction between the bolt threats and the threads of the nut or whatever the bolt is being screwed into, to prevent it from loosing up, among other reasons. After a kittke while, the metal in the bolt "relaxes," one of the reason some mechanics and in some extremely crucial installations, the tech has to ways some time and then check the torque again. One of the problems with over torquing is that you over stretch the bolt. Not a big deal unless you over torque way too much. Then you can snap bolts or strip the threads. But repetitive stretching from removals, eventually can cause the bolt to fail. Similar to an elastic after it has been over stretched over and over. I am way over simplifying to may it easier to understand. I could get into what happens to the metal down to the molecular level. But ai'll leave it as it is. Sadly, most people have no understanding about the science behind it, and they'll argue with you as if they were experts. 🤦♀ Hay chihuahua! Yeah, they'll arque that they have never used a torque wrench in their lives and they have never caused a bolt to fail. Hmm, the maker of Helicoil will agree (wink wink) and laugh... laugh all the way to the bank. Thanks mainly to those who never use torque wrenches or never have they torque wrenches calibrated. Using cheap torque wrenches doesn't help either. Oh well, to each their own.
@mikemulligan7140
Жыл бұрын
Hey Marcus...looking forward to your long term evaluation, particularly during your trail riding 😀How long before the snow comes? We have had the driest, hottest Sept/Oct on record in Vancouver Canada
@everythingtenere
Жыл бұрын
Heeey Mike! I think we will see snow anytime in November, so not a lot of rides left. Going out on Wednesday for probably the last enduro training this year. But I will most likely be able to join some sort of gravel group ride too.
@Antti4548
Жыл бұрын
Do I need one? No. Do I want one? Yes!
@everythingtenere
Жыл бұрын
story of my life LOL :D
@skybluetenere
Жыл бұрын
Gear shifting improved on my T7 after changing engine oil to MOTUL 5100 10W-40. This part now looks like Version 2.0 💙💛🏁🤛🏼 BTW vendor website says 6.4 Nm torque for the bolts and regrease every 5.000 km.
@everythingtenere
Жыл бұрын
Yea I heard oil change aided for those that had issues. I try to have an eye on the little oil level window, as long as it’s semi clear it’s 👌. When it starts getting dark brown I replace it. We will see how the shift support feels on my Wednesday enduro practice 🤪, will be nice to test the Tracker tires and Racetorx in the mud
@alrightdave6135
Жыл бұрын
Moving to semi synthetic? From what ?
@glight5205
Жыл бұрын
Tbh if you change the engine oil at 5000Km the gears are smooth enough, at least they are for me.
@everythingtenere
Жыл бұрын
That is true, but it does makes it all more crispy. For sure a unnecessary add on, but I like it
@gabrielkopp2036
Жыл бұрын
Have you had a chance to test it yet
@everythingtenere
Жыл бұрын
Yea, and it does make everything feel a bit more crisp
@gabrielkopp2036
Жыл бұрын
@@everythingtenere good to hear..I am considering putting one on my tenere just for peace of mind and to avoid any future issues with the bearings in the transmission
@cliff1551
Жыл бұрын
Looks good mate 👍 but a bit upset no sticker 😔😀
@everythingtenere
Жыл бұрын
Haha, I mentioned that in one of the edits that I cut out of it. Lol. Man a big bummer, I want stickers 😂
@cliff1551
Жыл бұрын
@@everythingtenere cut the decal of the bag print it on to sticky paper
@racetorx9702
Жыл бұрын
@@cliff1551 we usually add 2 stickers in all orders, but possibly we were in the middle of new stickers being made as we have plenty to provide in every order now :)
@alrightdave6135
Жыл бұрын
Looks like it won't fit with the r &g engine case covers.
@everythingtenere
Жыл бұрын
That’s what I thought at first too, but there was no problems at all. Not with Tripleclamp covers though. But R&G is like same same.
@alrightdave6135
Жыл бұрын
@Everything Tenere thanks for response. R&g uses the 2 bolts. It is higher than yours. Hopefully someone will comment . Ride safe
@majormassenspektrometer
Жыл бұрын
waste of money. Better spent on gas for the bike to ride.
Пікірлер: 35