Bonjour, Pour les piles, il faut dévisser le détecteur. Oui il y a une veilleuse. Pour cela, au moment de l'allumage, il faut rester appuyer sur le bouton ON. David
@Marvin13250
12 жыл бұрын
salut . j'aimerai acheter ces detecteurs . ma question est peu t'on synchroniser la centrale avec des detecteurs acheter individuellement ?( je pense que oui sinon on ne pourrai pas acheter la centrale individuellement.. mais je prefere avoir la confirmation.. je peche avec 3 cannes et je veux 1 radar jaune un rouge et un vert avec la centrale et on ne peux pas les acheter les 3 comme sa .( sauf en bleu .) merci ;)
@WhiteCarpJRC
12 жыл бұрын
Sehr gutes Video!!! Vielen Dank!!!
@davidloulier
12 жыл бұрын
Bonjour Il est tout a fait possible de parametrer les detecteurs individuellement. Pas de souci
@davidloulier
12 жыл бұрын
Bonjour, Pour les avoir démonter, passer dans l'eau pendant 3 minutes et fais sonner ensuite, je trouve que le test est bon. Je peux vous dire que le Radar est parfaitement étanche....
@Marvin13250
12 жыл бұрын
ok merci pour cette reponse rapide ;)
@oscarortega658
11 жыл бұрын
sorry, google translator...In the instruction manual says: vous avez la possibilite de contrôler vos réglajes de sensibilite et de tonalité grâce aux LED. Lorsque votre detecteur est en marche, appuyez brievement sur la touche On-Off et tournez le bouton S ou T afin de visualiser la finesse de vos reglages.... That option does not work. This function activates the temporary mute from the alarm. Also only is described in the instruction manual in French language
@oscarortega658
11 жыл бұрын
Bon après-midi: Je tiens à m'expliquer le processus de changement de batteries. comprenez pas qui dit que vous devez appuyer sur le bouton ON avant de les retirer, parce que dans les instructions, il ne dit rien à ce sujet. Aussi dans les instructions vous invitant à retirer le capot arrière, puis se reposer pour définir les batteries d'alarme en position verticale. N'est-il pas plus logique de le placer dans une position horizontale, il ne se déplace pas n'importe quel élément?
@davidloulier
11 жыл бұрын
Bonjour Mathieu, si tu n'as pas acheter le coffret, ils ne sont pas synchroniser. Voici le mode d'emploi en 2 messages : Mettez sous tension le ou les détecteurs et le récepteur. Sur le récepteur, appuyez simultanément sur le bouton « PLUS » et le bouton « MOINS » pendant quelques secondes. Après un moment, vous entendrez un bref bip aigue et la LED numéro 1 va s’allumer.
@davidloulier
11 жыл бұрын
Suites: Appuyez sur le bouton « PLUS » ou « MOINS » pour vous positionnez sur le LED correspondante afin de paramétrer votre Radar DSi. Faites sonner votre Radar DSi, le récepteur DSr émet un bip après la reconnaissance du signal. Pour confirmer votre choix, veuillez appuyer simultanément sur le bouton « PLUS » et « MOINS » pendant quelques secondes jusqu’à ce que la LED s’éteigne. Votre détecteur est paramétré.
@davidloulier
11 жыл бұрын
I read all tne instruction manual, and i don 't see that in the French manual
@GG59DK
12 жыл бұрын
Pour le changement de pile sur le detecteur??? (on voit bien sur le recepteur ) Il y a une veilleuse ou pas ??
@davidloulier
12 жыл бұрын
le numéro se trouve au dos de chaque détecteur (SN:000000) et pareil pour la centrale
@davidloulier
11 жыл бұрын
Bonjour Oscar, je ne comprend pas très bien votre message. Perhaps it will better in english.
@TheTrancefool
8 жыл бұрын
Thank you very much. Would you be so kind to copy/paste all of the text of the users manual if possible? Or copy a link where I can find it? Because I was hardly searching but couldn't find it anywher, as I wrote. I'm thinking on buying this set, but I want to be clear of all of it's functions before... Thanks in advance.
@oscarortega658
11 жыл бұрын
Ne pas comprendre une fonction indiquant les directions et cela n'a pas fonctionné. Selon les instructions signifie ceci: la position de la commande des éléments pour régler la sensibilité et leds hauteur du signal sonore par une colonne afficher. Si l'appareil se met en marche, appuyez sur le bouton on-off très prochainement. Je le fais, mais ça ne fonctionne pas, mettez la sensibilité et le ton, mais la LED ne bouge pas .. Merci pour votre réponse. Une salutation
@WhiteCarpJRC
12 жыл бұрын
Très bonne vidéo, Je vous remercie!!!
@carpcat41
12 жыл бұрын
ok merci !
@TheTrancefool
8 жыл бұрын
Hello! Is there a night light function on this indicator? When a light is lighting constantly on the indicator, that signes, that is on, even if there is no signal because of fishes. It would be necessarry during the night. if yes, how to torn it on and off? Sorry, but I don't speak your language, and don't really understand the video. I didn't found any user's manual on the internet.
@davidloulier
8 жыл бұрын
+András Pintér The LED’s placed under the transparent multi-color acrylic sheet (Plexi-glass) provides a clearly arranged visual display. First, the visual indication of the fishing line’s direction has been solved in an attractive and clear way. Line moving forwards is indicated by LED’s that begin to switch on and off from the bottom part upwards. The drop back is indicated by LED’s running downwards. After the movement has been detected, the LED’s latching memory function is activated to draw the angler’s attention to the bite with a few seconds delay to give him the opportunity to detect in which direction the fishing line has moved. If the fishing line has moved forward two LED’s in the upper part of the display indication light up. Upon the backward motion (drop back), the LED’s in the bottom part remain illuminated. Night position lamp:At night, you can switch on the positioning LED. Push the ON-OFF button and hold it for approx. 5 seconds. You can hear a triple sound indication and the upper LED lights will be illuminated. Upon indicator switching-off, this function is cancelled again. Discrete night mode - LED’s switching-off: (it is possible to switch-off all upper LED’s or all LED’s):You also have the possibility to switch-off the LED’s especially at night. It is possible to switch-off just the upper LED’s , the bite is indicated by an illuminated on/off button, or to switch-off all lamps if required. How to switch-off just the upper LED’s …. when the indicator is on, push quickly 5 times the ON-OFF button How to switch-off all LED’s …. when the indicator is on, push quickly 10 times the ON-OFF button. The above function is cancelled, when the indicator is switched-off.
@carpcat41
12 жыл бұрын
salut ; ou ce trouve le N° de serie pour l enregistrement sur le site JRC ??
Пікірлер: 21