Another significant difference between Radar and Ultrasonic technologies is in responsiveness to the target material. In both cases the returned signal to the sensor is a reflection from the object being measured. The strength of a reflection from an interface is based on effective change in impedance going from air to the object. In the case of ultrasonic you tend to get a good reflection from most flat objects whose acoustic impedance will normally be orders of magnitude different from air. Generally speaking you will get an equally strong reflection from a flat surface made of steel, plastic, drywall, or calm water surface. In the case of Radar technology the important factor for a material is it's DK value - related to how well the material conducts electricity. So a radar sensor will get very high amplitude reflections from a metal surface, while getting almost no reflection from a plastic surface. Strong echoes can be achieved off of a water surface, but you'll get a much weaker echo from a low DK petrochemical material. If the object of interest is high DK (like water), but there are higher DK obstructions present (eg. metallic objects nearby) then you will get disproportionately stronger response from the false metal targets compared with the water surface compared with an Ultrasonic technology.
@InstrumentCalibration
11 ай бұрын
Hello Yes, you are absolutely correct. Thanks for sharing your knowledge in comment box. I really appreciate it.
@bukadakfighters3578
Жыл бұрын
Thanks a lot for this video it so helpful
@mdirshadahmad578
Жыл бұрын
Sir ur video is so helpful
@InstrumentCalibration
Жыл бұрын
Thanks and welcome. And keep supporting us.
@surendrakverma555
Жыл бұрын
Thanks Sir
@InstrumentCalibration
Жыл бұрын
Great to hear that you enjoy our videos
@AnkitYadav-kr8tz
Жыл бұрын
Can you explain some transistor like NPN and PNP. Where to use and which type is most useful??
@InstrumentCalibration
Жыл бұрын
Hello Ankit In this channel, our core focus is to concentrate on instrumentation only. But I will send you the documents, Please send me your email id
@kehhkhuantan2550
10 ай бұрын
Hi can I have it also?
@kadali1987
Жыл бұрын
Sir please make a video on different types of control valves and its uses ,
@InstrumentCalibration
Жыл бұрын
Hello Kadali Sure...I will make video on this topic
@kadali1987
Жыл бұрын
Thank u very much
@pontsholekoala6247
11 ай бұрын
Great stuff
@InstrumentCalibration
11 ай бұрын
Thank you. Thanks for watching our videos
@bongumusainnocentmavuso7359
Жыл бұрын
Sir can you please share drum level control calculations...
@InstrumentCalibration
Жыл бұрын
Hello Sure... Please share me your email address
@ayyappaakula8821
Жыл бұрын
Hai sir please share Analyzers calibration and maintenance I need SDI Analyzer and TOC Analyzer
@InstrumentCalibration
Жыл бұрын
Hello Will make one video on this topic once i have content.
Пікірлер: 19