Thank you and appreciate your effort. Greetings to you from Turkey .
@AllAmericanFiveRadio
3 ай бұрын
Thank you! You may like this follow up video. LC Oscillator Why and How Does it Oscillate The Basics kzitem.info/news/bejne/kW9ttGSfmqVim5g
@radiofun232
Жыл бұрын
Thanks Richard, brilliant video about a peculiar (though working...) radio circuit. Kind of peculiar self oscillator mixer stage! They knew (in those days) exactly how they could manage a radio tube to its precise properties. And your explanation is very precise, many thanks, again. 9 may 2023.
@AllAmericanFiveRadio
Жыл бұрын
Thanks Ko! This video was challenging to put together because I had to keep track of four items on each drawing. I hope this video can helps people understand this type of oscillator. Thanks again!
@francismannion7075
Жыл бұрын
Thank you for an excellent lesson. Your teaching style is both fun to watch and very informative.
@AllAmericanFiveRadio
Жыл бұрын
THANK YOU!
@stevemar7952
Жыл бұрын
Excellent video. I like how you show the schematic and the scope at the same time. It really makes it easier to understand how it works. Thanks!
@AllAmericanFiveRadio
Жыл бұрын
Thank you and your welcome!
@mmayhem29
Жыл бұрын
Excellent video thank you!
@AllAmericanFiveRadio
Жыл бұрын
Thank you, and your welcome.
@rob_scooter6199
Жыл бұрын
Thank you!
@AllAmericanFiveRadio
Жыл бұрын
Thank you, and your welcome.
@W1RMD
Жыл бұрын
Thanks for showing and have a great day!
@AllAmericanFiveRadio
Жыл бұрын
Thank you! Hope your doing well!
@macgvrs
Жыл бұрын
That was a very clear explanation. Thanks!
@AllAmericanFiveRadio
Жыл бұрын
Thank you, and your welcome.
@n1chp
Жыл бұрын
Hi Rich, Very nice explanation. Drawings are great.
@AllAmericanFiveRadio
Жыл бұрын
Thank you!
@DERB_Seymour_Indiana
Жыл бұрын
Hi Rick. This is an excellent demostration of how the local oscillator works. You illustrations are spot on and very easy to understand. Curious about your capacitance meter, I've had a few, but yours seems to be pretty steady. Has it worked well for you? Thanks for the info. :)
@AllAmericanFiveRadio
Жыл бұрын
Thanks Doug! The capacitance meter has been very good. I bought it from Antique Electronics Supply. It is still accurate!
@DERB_Seymour_Indiana
Жыл бұрын
@@AllAmericanFiveRadio Appreciate the info Rick. :)
@buddyhoover57
6 ай бұрын
Excellent video. This is the information I've been searching to find. Now I know the local oscillator can probed with an oscilloscope and verified. It looks like the amplitude was approximately 2.5 volts from peak to peak. I assume that was a 10:1 probe to prevent loading? Thanks!!
@AllAmericanFiveRadio
6 ай бұрын
Yes. Thank you, and your welcome. I’ll be working on a new oscillator video some.
@majorfifth3708
6 ай бұрын
Excellent video! What I don’t understand is why, when the current from cathode to plate is at maximum, that the magnetic field in L2 starts to collapse. Why does it not maintain its field as long as that steady maximum current is flowing? Is a cycle of the oscillator tank circuit affecting the negativity of the cathode and control grid?
@AllAmericanFiveRadio
6 ай бұрын
It is the Grid that controls the Tube. It is the voltage on the Grid that that runs out making the Tube start to turn off. This would make a good video. Why does a Tank Circuit oscillate.
@AllAmericanFiveRadio
5 ай бұрын
I just put up a new video LC Oscillator hope it answers your question. kzitem.info/news/bejne/kW9ttGSfmqVim5g
@hhhh3551
Жыл бұрын
Thanck you very much .so if you make video to explaining uhf vhf eleectromagnetic and the oscilator to any one thanks
@AllAmericanFiveRadio
Жыл бұрын
Thank you, and your welcome.
@ronpearson1912
Жыл бұрын
This is awesome, so a critical design aspect would be how fast that heater is heating up as thats whats effecting your oscilator frequency? Or perhaps you would just have an erroneous oscillator frequency until the tube was fully warmed up since the rate of field build up in the inductor when its first turned on will be based on the warm up rate. Once warmed up it will just oscolate back and forth. Is this correct? Then pin 6 is held positive so that when its the electrons time to go they GO (like a boost pump for the plate)?
@AllAmericanFiveRadio
Жыл бұрын
The heater heats up the Cathode so that the Cathode can emit electrons, does not affect the frequency very much. The tank circuit is what determines the frequency.
@ronpearson1912
Жыл бұрын
@@AllAmericanFiveRadio I started to write another confused question and then I saw it, thank you for your help and patenice. I used to be a process engineer and went back for electrical, super excited for every little light bulb of intuition I build.
@AllAmericanFiveRadio
Жыл бұрын
@@ronpearson1912 I thought you was my friend from Texas. My name is Richard McWhorter My first Book. www.amazon.com/All-American-Five-Radio-Understanding-Transformerless-ebook/dp/B07Q7139SP/ref=sr_1_2?keywords=all+american+five+radio&qid=1636241858&qsid=146-8490440-5519616&sr=8-2&sres=B01DNICB7K%2C1886606196%2CB07TC546HG%2CB0013KV19K%2CB07TXL4XJP%2CB00HSHH5DI%2CB008EAT00E%2CB00GUDH4PU%2CB081H65635%2CB00004T8R2%2CB00UMVVUOC%2CB0977FTG2C%2CB08FDPW8KR%2CB08XX1WRVZ%2CB09BQ7TQNS%2CB004T9Y428 My free Ebook. Password is allamericanfiveradio kzitem.info?event=channel_description&redir_token=QUFFLUhqbUQzWUpQXzh1SFNpaE1fMlVrS1drU0pIMk1pZ3xBQ3Jtc0tsRWRfMHFaUUpzRzdoeU5uWG1nREprS3YtTnlHNnFSTmhoQnE0X1YyR2tqV1BoUHljS2xFZHFTS05Dd1A5bWpCZDdNNHcxZ0I1VzNleDlSZ3FPZ1VxaDN4czZCWElYZUVib1czTi1yLTFUdW1xNDVhMA&q=https%3A%2F%2Fdrive.google.com%2Ffile%2Fd%2F1HHmaWYr7UMACfmS4W5uL6PADoem2KlRp%2Fview%3Fusp%3Dsharing Keep askng your questios. My email is allamericanfiveradio@yahoo.com My friend from Texas. www.youtube.com/@Ronbob59
@lysippus
Жыл бұрын
is that a log variable capcitor?
@AllAmericanFiveRadio
Жыл бұрын
Not sure, never thought about it. I'll check into it.
Пікірлер: 34