Help, it's broke again! After several years and almost 50K miles it has happen again. The SVC Four Wheel Drive light came on and it happened on a bumpy section of Interstate. I have used 4 wheel only once since the module was replace as seen in my last video on this subject.
I need you help to determine why this happens and how to fix it without going back to the RAM dealer. PLEASE leave me a comment. #RAM #Cummins #4WD
THE FIX: Here is a easy fix to replace the actuator: • RAM 4WD SERV Failure -...
EVIC Display "Service Four Wheel Drive System"
CV Filter Replacement Notice at 67,500 miles
Do the following to clear the "Perform Service" display
1. Turn the Ignition Switch to the On position (do not start).
2. Press and release the Brake Pedal two times.
3. Fully depress the accelerator pedal slowly two times within 10 seconds.
4. Turn the Ignition Switch to the Off/Locked position.
Note: If the indictor message "Perform Service" displays on the next start it did not reset. If necessary repeat this procedure.
____________________________
Please subscribe to my channel, and share the videos with your friends. Thank you!
Leave your comments and questions in the section below and I will try to respond as soon as possible.
____________________________
Connect with Landing Zone Home
Facebook:► / lzhome
Twitter:► / lzhome
Негізгі бет RAM 4WD SVC Light Again - Help!!
Пікірлер: 6