Glad you were able to get it out without any problems bro I was thinking of taking my passenger seat out and putting a new one in since it’s not a powered seat
@BoostedMotorsports
5 жыл бұрын
Yeah its actually pretty easy I was surprised
@VanEastBC
3 жыл бұрын
Hey thanks was wondering if you've ever done a vid on rear seat removal? I've got the 2013 sport with the split rear seat and sub woofer, bolts are all out but can't seem to wrench the seat out, wondering if I missed something.
@626jonny
Жыл бұрын
Question I need to remove the back seat, do you have a video on that bc I need to replace the vents that are leaking water
@timmyers2431
2 жыл бұрын
I weigh as much as you and the seat! :D
@GForce101
2 жыл бұрын
I did removed my passenger seat and the light for airbag turned on … I did some research but can’t find a solution for this do you have any advice ?
@craigabbott131
4 жыл бұрын
Can I separate the seat from the brackets. I have looked underneath the seat , but did not see any bolts. I want to lower my seat an inch and need to cut and re-weld the brackets without burning the upholstery, Thanks
@but_why547
2 жыл бұрын
I don’t have power seats so do I need to wait a certain amount of time before disconnecting
@kokkolino1196
5 жыл бұрын
Question my brother !!! How tall is your sealing and how tall your hoist??? And does the hoist lift the truck all the way up?? To work comfortably standing under?
@Swanny383
2 жыл бұрын
I just got a 2022 Ram 2500 Laramie crew cab and really wish I had a couple extra inches of leg room, I am 6'7" do you know any ideas ?
@alijatt1962
2 жыл бұрын
You should think about getting into a semi truck ! That pick up truck is a little small for you bro!
@chadweissC2233
5 жыл бұрын
Do you still have the cutout installed? Has it given you any issues? I'm looking to pick one up for my Ram Rebel but I'm hesitant.
@hastyhemi8737
5 жыл бұрын
Chad Weiss mine is going on 2nd year no issues. I use it all the time too. Hope this helps. kzitem.info/news/bejne/t6qduWqVrahpnn4
@BoostedMotorsports
5 жыл бұрын
Still installed. It does leak a tiny bit from the valve but nothing major.
@chadweissC2233
5 жыл бұрын
Ok cool. I want to put one on and I expect it to leak (especially considering I will be offroading with it in mud) so I was curious about its performance with a clean setup like yours.
@hastyhemi8737
5 жыл бұрын
Chad Weiss I hear ya, just don’t get a cheap one... go with something like QTP and you should be fine 👍🏼
@FSTHEMI
4 жыл бұрын
U ever remove and weigh the rear seats?
@cristiantorres5541
5 жыл бұрын
Can you go from Manuel too electric ? @boostedmotorsports
@shannontlane9338
Жыл бұрын
Anyone know or have any idea what the passenger seat and bracket weight is?
@SeattleRingHunter
4 жыл бұрын
almost like thread locker on the rear bolts?
@bol922
4 жыл бұрын
Torqued down
@hastyhemi8737
5 жыл бұрын
Time to put this baby on Jenny Craig diet!! It will make a nice diff. My 4 door crew cab stock cam N.a does 12.7’s with this same weight reduction... can’t wait to see yours with the procharger and weight reduction 🤙🏻
@BoostedMotorsports
5 жыл бұрын
Hopefully break 11s but we shall see!!
@hastyhemi8737
5 жыл бұрын
BoostedMotorsports Can’t wait to see brother 🤙🏻
@freakyfighter5
3 жыл бұрын
Great vid, was there any issue with the airbag sensor when removing electric seat? I’m thinking of replacing my stock seats with Scheelmanns which are manual w/o airbags for the driver. I want to do this install myself but little worried about the airbag sensor. How would you get around this?
@reyrolando86
2 жыл бұрын
@BoostedMotorsports I just watched this video and removed my passenger seat, very easy process, so thank you for this video. I did notice that when I started the truck I had a message on my dash that read "service airbags system". Did you have this same message? If you did do you just ignore it or did you do something to take care of it?
@pavlopiechienik9544
2 жыл бұрын
@@reyrolando86 same problem, did you manage to fix it?
@reyrolando86
2 жыл бұрын
@Pavlo Piechienik nope. Took it to the dealership and they said it can't be reprogrammed.
@JohnDoe-jn3es
3 жыл бұрын
THANKS FOR SHARING I PLAN ON SELLING 2013 express ram and carpet looks wore out
@hunterdan2002
5 жыл бұрын
Do yourself a favor and buy a cordless impact, I have that harbor freight model and bought a cheap ryobi 1/2" cordless impact and it blows the harbor freight out of the water, plus its cordless.
@BoostedMotorsports
5 жыл бұрын
Yeah thats not a bad idea!
@josephrodriguez2095
5 жыл бұрын
Can you recommend an hid kit for my 2017 ram 1500? I’ve looked on amazon but I’m not sure which is compatible
@alijatt1962
2 жыл бұрын
Lasfit best in market!
@davehodgson4975
4 жыл бұрын
2012 front seat removal with no power has 2 more bolts coming from the consul
@TunedRAMS
5 жыл бұрын
When you running track again?
@BoostedMotorsports
5 жыл бұрын
Tonight 😎
@keithcaudillcrcrc
5 жыл бұрын
Are those hellcat or ram seats?
@BoostedMotorsports
5 жыл бұрын
Stock RAM Sport seats. My reference to the hellcat/demon seat was from all the promo stuff that was being discussed with weight reduction options on the Dodge Demon
@keithcaudillcrcrc
5 жыл бұрын
@@BoostedMotorsports ahhh ok. I have a lead on some hellcat seats and wondering if they would work. I have a sport now but not full leather. I wonder what mods would it take to fit hellcat seats
@captainbart
4 жыл бұрын
Doing the same task. Front bolts are 15 mm and come out with relative ease.....back bolts are 18 mm, and more of a job to remove. Slide under and hit the bolts with some PB Blaster......the night before. Other than that....the bolts are a simple removal.
@Valverde38
2 жыл бұрын
I removed the passenger seat on my 2019 ram 3500 but the the air bag light is on
@alijatt1962
2 жыл бұрын
Hey did you try get ride of the airbag light ?
@alijatt1962
2 жыл бұрын
Let me know if you do get to know how to fix the airbag light
@mikehawk7230
2 жыл бұрын
I tryed to get my seats out but those fucking back bolts are in there so tight and I hardly get any movement with my breaker bar
@Leadfoot-zv7gk
5 жыл бұрын
My ram weights 6330 appx . I have a leer top ,nerf bars and a bedslide.
@Leadfoot-zv7gk
5 жыл бұрын
Next spring I will prep it to see how much weight I can remove. 600 pounds ? will be my thought.
@hunterdan2002
5 жыл бұрын
@@Leadfoot-zv7gk my 2016 crew cab outdoorsman weighs in at 6k with me behind the wheel. All stock except for tonneau cover, including OEM running boards and 32 gallon tank
@ixskatextoxlivexx
5 жыл бұрын
I hauled some metal off one time and my empty weight with just me was 5500 pounds. 2010 bighorn 5.7
@muko2002
5 жыл бұрын
Are the front seats for sale 😬 lol nice video as always man!
Пікірлер: 53