For the heck of it I went over to the Ramm web page and took a gander at their video. Same product, nice guy but you bury him in quality, process, ease of understanding etc. Without a doubt you have some of the highest quality DIY videos available on the internet. Great job, I know these videos take an inordinate amount of time and I knew you were talented but now with a direct head to head production , you have no peer!
@SigGuy
3 ай бұрын
You are too kind. Thank you very much for taking the time to leave such excellent feedback. I really appreciate it. Thank you for your support.
@chrisross1657
16 күн бұрын
Agreed ! I got 2 minutes into the video and looked elsewhere, Glad I came here !
@joeszeto8859
14 күн бұрын
... an hour and 19 minutes... you weren't kidding about this video being so damn long... but man was it worth sitting through. What an amazing and detailed explanation of the whole install process. And just like all your other videos, top notch!!!! And all those tools you created... awesome!!!
@jonathanwilliams7161
4 ай бұрын
Great video! 📹 ❤ Always look forward to your videos!
@GalloPazzesco
19 күн бұрын
You.Are.Da.Man! .... the SIG Man. Subscribed, bell rang, commented, liked, upvoted, shared ..... may the algorithm gods smile favorably upon your channel SIG friend.
@SigGuy
19 күн бұрын
Haha. Thank you very much for your support. Much appreciated.
@Civilian_Patriot
Ай бұрын
Why do I have a feeling the owner of this company drives a Dodge Ram? 😂
@rankang2194
4 ай бұрын
Great upload…Thank you for sharing this information
@joebiden613
4 ай бұрын
Might have missed it in the video, but do you have to install the manual safety?
@SigGuy
4 ай бұрын
You do not.
@aggiebrandon2007
Ай бұрын
Your videos are invaluable. Thank you for your contributions to the community. Would you please consider showing an IMT Nebraska install and tuning? There doesn't seem to be any on KZitem, and I can think of no one better to do it. Thank you.
@briandyer6809
4 ай бұрын
Honest comparison Ramm or Mcarbo?
@brianjkeene
4 ай бұрын
There is no comparison. Have had my Ramm Tactical trigger for a couple of weeks now and it’s in a different league. It’s insane.
@tizben
3 ай бұрын
M carbo needs to be combined with their striker in order to make a comparison
@sirgreybat
Ай бұрын
This is a REALLY good instructional video! Very well done.
@davidballenger4954
2 ай бұрын
The trigger reset is incredible. If Ramm expands to other models besides Glock and Sig they'll really bring value to the market. Really good stuff from Ramm and another fine video from the Sig Guy!
@keysersoze7758
Ай бұрын
I know you stated in your video that we do not need to use the springs, however, do we have to swap the sear if I only want to use the trigger shoe, thumb safety and take down lever?
@chadmathias7254
3 ай бұрын
What striker upgrades do you have for p320 axg legion comp
@spankymagee
3 ай бұрын
Got my sig p365 X mag release extender in yesterday and put it in. Much better now.
@dimemmo
3 ай бұрын
Is this the best trigger you would recommend for the p365?
@Jeremy-uw1np
2 ай бұрын
I’m stepping into the Sig World with a P365 for a carry. One of the most module grips I’ve found is “Smith Defense”. But there’s not much info out there. Do you @SigGuy or anyone have any experience with there grips?
@SigGuy
2 ай бұрын
I've handled them buy never fired a 365 using one. Excellent build quality. I have them in stock here: www.sigguy.com/smith-defense
@yourhomesoldguaranteedreal5865
2 ай бұрын
Are you planning on either mirroring or switching over to Rumble with KZitems anti gun regulations for gun channels? I'd hate to not be able to find your content
@SigGuy
2 ай бұрын
All my videos are already on Rumble. I've been uploading them there for the past couple years now. Thank you very much for your continued support. I really appreciate it. Here's the link :) rumble.com/c/c-5364805
@chrispangilinan4594
3 ай бұрын
Would you recommend that for an EDC P365? Also, any thoughts on the Lightning Strike Steel Striker for the P365?
@SigGuy
3 ай бұрын
Personally I do not do any inside mods on any EDC firearm. The lightning strike had issues with breaking in the beginning. I haven’t followed then since. I didn’t even realize they were still around. I trust the factory sticker over any other. They have substantially more in use with excellent reliability. Why change?
@chrispangilinan4594
3 ай бұрын
@SigGuy not looking to change anything on my stock FCU as it is my EDC. Just wondering about strikers since there used to be issues. My stock striker has been good for the most part, I ran my p365 in an IDPA match using my hand loaded ammo with Fiocchi small pistol primers (all that I could get my hands on at the time I bought them), had about 3-5 light strikes. I guess, I'm just looking for that reliability and guaranteed ignition regardless of what ammo I feed it.
@tizben
4 ай бұрын
Because of all the short pre-travel, is the safety plunger already disengaged?
@jmangus83
4 ай бұрын
Did you watch the video? He goes over that at 1:14:00
@tizben
4 ай бұрын
@@jmangus83 appreciate the timestamp
@bluyetiinc7553
4 ай бұрын
@@jmangus83we dont watch video. We just wait for your comment
@ConcealedCarryer
3 ай бұрын
The striker safety is likely bypassed as acknowledged by Ramm tactical on the SIGforum
@ConcealedCarryer
3 ай бұрын
If someone does get this trigger, they will want to check the striker safety function and verify that there is red loctite on the sear set screw.
@tomwest5083
4 ай бұрын
More interested in the Tyrant CNC intellitrigger. Video very comprehensive. Thanks Sigguy
@briandyer6809
4 ай бұрын
Itellifire is a great upgrade its great for carry . Doesn't reduce the pre and post travel as much as this on or the MCARBO but it does clean up the trigger a lot gives it a much crisper break and reset. Because of the safety I did feel more comfortable about lowering the trigger weight with a spring kit.
@tizben
3 ай бұрын
@@briandyer6809how is the creep past the wall with this trigger kit compared to the m carbo or stock trigger, if you have the experience?
@briandyer6809
3 ай бұрын
@@tizben post travel is about the same distance as factory which isn't bad but it feels cleaner. From wall to full pull and back to reset is about .25" with the spring kit I'm at 4 lb pull weight and still breaking in only 200 RDS since the trigger change
@tizben
3 ай бұрын
@@briandyer6809 thank you. I appreciate the insight
@anthonysilva4410
3 ай бұрын
@tizben I can't compare it to the Mcarbo but the Intellifire trigger is a really nice upgrade over the stock curved trigger. It's not popular in the FB groups but it feels great at the range.
Пікірлер: 41