So clean , those cuts and they are free hand and on a ladder. Well played.
@tristanfunkbowl
3 жыл бұрын
I look forward to these videos every Friday I get off work! Great way to start the weekend 🤘🏻
@arosswelding
3 жыл бұрын
That is good to hear. I’m glad you enjoy the videos! Thank you for watching!
@cheffsolo7739
3 жыл бұрын
I do also keeping doing it , I would love to see your video everyday from everything.
@patrickguarracino3174
3 жыл бұрын
Coming from a retired pipe welder of 42 years, Great job brother!!
@jonnyonthespotwelding979
3 жыл бұрын
Hey " A" man, you nailed it on the head, being safe is the first priority. When you question if its safe, IT'S NOT. Good message. Hood down lights on.
@Whipple1
3 жыл бұрын
Hey Austin! I learned something new today! If I ever take a one-day job, three hours from home, I am going to be danged sure to pack a lunch! LOL Cheers! Whipple
@arosswelding
3 жыл бұрын
Haha that’s for sure!
@russwhitley7156
3 жыл бұрын
Weld on !!!!! Your the man brother!! One bead at a time , one breath at a time...
@wesrobinson8003
3 жыл бұрын
I’m so glad you made the comment about the price of the prebuilt gate versus the price of a custom built gate. I have customers all the time I have to try and explain why there’s such a price jump in what we can fabricate and what’s available about the farm store.
@MegaGsizzle
3 жыл бұрын
Loved the time lapse view!
@davidusry5048
3 жыл бұрын
Boh thats a mighty fine pocket protector you got there!
@olddawgdreaming5715
3 жыл бұрын
Great job Austin, sometimes you have to save a little and close up the hole in the fence and use the money elsewhere until you get the cookie jar filled and then build the gates you really wanted. You did a great job for your friend. Thanks for sharing with us. Fred.🙏🏻🙏🏻👍👍👏🏻👏🏻👋👋
@justinlongoria9306
3 жыл бұрын
I know its cheaper, but I honestly like the gates he put on this entry. They look sharp.
@trainchasersatwork
9 ай бұрын
Enjoyed watching your videos on building this entry way gate and fence. Awesome work and video content!
@oscarg5753
3 жыл бұрын
Could you make a video on torch cutting tips? Such as getting a good flame, i see you always get a great cut & dont seem to overheat the work piece.
@greggschultz5768
3 жыл бұрын
It sure is fun to watch you do your thing. I love your attitude and the way you take us along with you. As always, thanks for sharing it all. Best wishes!!!
@arosswelding
3 жыл бұрын
I appreciate you watching!
@corysmith9551
3 жыл бұрын
Looks good bud. I passed through that area and i recognized that truck and i saw u diggin in ur bed i told my wife i swear he looked just like austin ross.
@peetky8645
3 жыл бұрын
ha
@andrewbrown747
3 жыл бұрын
OSHA saw where you put that ladder on the tractor hahahaha...great video brother man, doing great work
@sammesser7144
3 жыл бұрын
Your a inspiration to all welders including me and your educational level is amazing
@glenngosline3303
3 жыл бұрын
Great job as always pipeliner pride.
@arosswelding
3 жыл бұрын
Thanks!
@traktorworks3200
3 жыл бұрын
your video skill are so professional. your presentation stills are masterful. and to top it all off I just love watching your vids. so keep up the good work
@jakestatefarm6525
3 жыл бұрын
Outstanding work and great advice.
@arosswelding
3 жыл бұрын
Thanks! And thanks for watching!
@bryanhall9274
3 жыл бұрын
Thanks much for the time to make the videos. Hopefully you and Kayla have a great Memorial Day holiday. Ps my spelling is not good
@danharris8046
3 жыл бұрын
I love watching your videos.... the music is great too
@thomasmullins8082
3 жыл бұрын
Yeah, your custom built gates look a lot better! Well done!
@VantageWelding
3 жыл бұрын
Super dope
@cedricjardouin598
3 жыл бұрын
Every Friday for the past 6 years I been watching keep them coming brother. I’m still waiting on my circle burner I ordered
@arosswelding
3 жыл бұрын
Thanks for watching and keeping up all these years! Kayla has emailed you about your circle burner... it got sent back due to an invalid address I think... she is waiting to hear back from you.
@cedricjardouin598
3 жыл бұрын
@@arosswelding can you get her to send it again thanks a million and I’m about to order the grass hopper too
@emsoutdoors1
3 жыл бұрын
Thsnk you for the great vids. I'm 40 and just now starting to weld. It's kind of a side thing now but I would like to make it more. Your vids help a lot.
@Digger72
3 жыл бұрын
Nice work dude.
@simmonsjalen65
3 жыл бұрын
Very nice perstine torch cutting, that torch tip looks brand new with a cut like that.
@timothybryantjr9514
2 жыл бұрын
I see the job site flex with the stabila in the back
@russelljackson7034
3 жыл бұрын
Right on
@Ruben901
3 жыл бұрын
Thats a good lookin fence right there 🇺🇸🇺🇸
@arosswelding
3 жыл бұрын
I sure appreciate it Ruben
@dsmreloader7552
3 жыл бұрын
The big plus to your custom gates is they won't sag where the purchased ones will over time..
@oklahomacrabber
3 жыл бұрын
Nice! Thanks
@j.r.sworkshop5372
3 жыл бұрын
You’re a bad ass!
@arosswelding
3 жыл бұрын
I wouldn’t go that far... lol I’m just a guy weldin for a livin. And lovin every bit of it.
@westweld
3 жыл бұрын
Pretty steady hand with that torch even when your pushing.....the second I start pushing instead of pulling it goes to crap
@jamesward5721
Жыл бұрын
I'd say most aspiring steel-workers ought subscribe to your channel just to get tips on how to torch-cut soooo damn smooth Austin. I've run a lot of oxy-acet torch, I have a Pal here who is considered "A Genius" with the gas-axe - and he's crap compared to how smooth you run one - we won't even mention me - I'm the stuff they use to reference the degree of roughness of bears behinds off of when it comes to torch-action. I also have yet to watch one of your vidjos without learning at least one thing - despite being a rod-botherer since I was 15. That alone is rare. But damn, man, you're smooth as with that gas axe.. It's making me reflect on my own relationship with the hot bottles. It may need re-visiting.
@79Z28Hellion
3 жыл бұрын
On another topic, lookin good slim. Happy Memorial Day!
@IAmGameAddicted
3 жыл бұрын
I love these videos brother, thanks for all the effort you guys put into them. You inspire me mister Austin
@5barkerstreet
3 жыл бұрын
i love torch jig
@bertjones1315
3 жыл бұрын
Awesome!. Thanks for the tips it helps on the gate projects and fence buildings I do!. More knowledge taught for free!. Can’t thank ya enough!.
@Frank_1988
3 жыл бұрын
Good job sir austin,plsss teach me how to compute this lateral pipe,thanks!😁
@jefferykingston7985
3 жыл бұрын
Love your work.
@0311cplofmarines
2 жыл бұрын
How far do you typically hang the horizontal piece from the ground? I pull a living quarters trailer with AC but also dont want the fire department not being able to make it down. My wife is worried the UPS truck won’t make it down. 😂
@johnburnitin1027
3 жыл бұрын
lol, been there where I forgot plate for ends. In my case, I had extra pipe so I just made bullhead caps. Gives an interesting look, for sure.
@BryantYazzie
3 жыл бұрын
Awesome Work Man.. good tips for 2” saddle
@thomasmihecoby1335
3 жыл бұрын
Fine work bud fine work 👌 Good camera placement to bud!!
@user-oj1dw8xp3o
3 жыл бұрын
Отличная работа!👍
@johnkries8189
3 жыл бұрын
Nice job, craftsmanship
@arosswelding
3 жыл бұрын
Thanks!
@TheRustyGarageandHomestead
3 жыл бұрын
Awsome job austin
@arosswelding
3 жыл бұрын
Thanks!
@totalcardetailing2022
3 жыл бұрын
Nice job!!! Keep up all this work you are going to have to get you a apprentice to help you. I have a machining background but have done a lot of welding and cutting with a torch never have done the saddles in big pipe but I came across and few pieces of 8” pipe drop off at the metal scrapyard between 15” to 24” so just to try my luck at it. Just keep up the good work. Catch you on your next video.
@cisolutionsllc
3 жыл бұрын
Awww no Karen cameo! ;-) Seriously Austin, love your videos. And really appreciate your "make it happen" attitude! Keep it up!
@randypeterson5732
3 жыл бұрын
I’m curious why you didn’t run the string line at ground level where you don’t need to do ladder work and just measure up to your desired height? I enjoy your work and never miss an episode. Keep up the good work!!
@waynedebski3886
3 жыл бұрын
You’d have to establish level at the bottom ( whatever height off the ground you’re ok with) then get on the ladder anyway and try and hold tape down at your marks. Wouldn’t make much sense. Also, level/plumb at bottom doesn’t mean level/plumb at the top. You also need center of pipe like he said to cut saddles which requires you to work off the ladder anyway. That’s probably why
@danielherlihy4685
2 жыл бұрын
I wish you had shown close ups of welding the crossmember.
@denaboersma6983
3 жыл бұрын
“But it still looks nice”. Man those gates don’t hold a candle to your custom built gates come on
@chyps9186
3 жыл бұрын
Awsome thanks!!
@davidrios8872
3 жыл бұрын
looks good but gotta remember safety first.tie off and lookout down where cut parts with a torch will land. that was near landing on them hoses
@ronfussell8244
3 жыл бұрын
Hi Austin,I've built a number of these,I used a tripod level,benchmarked post set the high side then brought the other side up and set it.I try to stay off ladders.U
@arosswelding
3 жыл бұрын
Very nice
@Crank1431
3 жыл бұрын
Really enjoy watching your videos! Might pick one of your circle burners up for farm use as I too suck at cutting round holes! So are you done with pipeline work or is the fence work filling the gap while the industry is down? Keep it up and really appreciate the time you take to throw in the tips you do!
@arosswelding
3 жыл бұрын
I’m not done pipelin. Just rollin with the slow down of pipeline work. I enjoy all of it!
@kylevand1442
3 жыл бұрын
Jam up hand my guy.
@wadewittman8510
3 жыл бұрын
Safety Third 👌😎! Looks great Austin! Ain't tomorrow Friday yet 😂?
@wargamingsupernoob
3 жыл бұрын
Hey Austin, if you feel comfortable discussing it, could you go over how to grip stingers? I find that I grip it several different ways depending on the length of my rod and positioning. Do you know of a grip that is correct?
@derrickchisholm8086
3 жыл бұрын
thumb on the stinger clamp handle but whats a rootrunner from canada know😁
@wargamingsupernoob
3 жыл бұрын
@@derrickchisholm8086 I get that, but what I found is that by extending your pointer finger along the stinger, you get a lot of control for weaving.
@Texaspipeliner210
3 жыл бұрын
Man dude I’m more impressed on how good your dodge has been to you you definitely got a good one
@cjfisher12
3 жыл бұрын
Ross do you have video on how to read the blue book if so I can’t find it on your Channel
@arosswelding
3 жыл бұрын
Check out these videos kzitem.info/news/bejne/qYqdsn2tpYSUZaA kzitem.info/news/bejne/tnh-lniGknWbp6w
@cjfisher12
3 жыл бұрын
Thx you for your such a quick turn around of all the guys on the tube I follow and watch and listen to for tips and tricks I find yours to be most practical and real world.
@cjfisher12
3 жыл бұрын
Would you be a opposed to me emailing you I have some questions about the pipeline industry I’ve been welding off and on since 2017
@adrianmartinez3220
3 жыл бұрын
Ever done any square tube fences? Curious on how they look!
@calurodriguez2172
9 ай бұрын
Como haces los tapones de los tubos
@USMCDMR
3 жыл бұрын
What tip do you use in your cutting torch?
@michaelbuttrey5498
2 жыл бұрын
About what would you charge on something like this? Ballpark
@braytonwillerval3942
3 жыл бұрын
What kind of torch do you have? It looks bad ass
@leearmendariz3588
3 жыл бұрын
Where can I get a leather pen case holder like that at?
@peetky8645
3 жыл бұрын
safety does not take a huge amount of time. a quick webbing tie down to attach ladder to post and a harness then attached to ladder can prevent a fall
@MarioV256
3 жыл бұрын
Yessir.
@dustingreenslade6630
3 жыл бұрын
Where did you get that torch head?
@joshuabriggs6617
3 жыл бұрын
man i want a profession like this what do I have to do
@Jboogy1st
3 жыл бұрын
I saw when you were cutting the saddle you crossed over your line in some places, was that a mistake or intentional?
@TheGamingmidnightsun
3 жыл бұрын
Mr Ross sir would 7018 be okay for mild steel at least I think it's mild steel as I've got to repair my gates as kids have kicked the snot out of them?
@urielvillanueva3256
3 жыл бұрын
Yes sir C'mon
@arosswelding
3 жыл бұрын
C’mon
@brandonbuckler6100
3 жыл бұрын
Are you going to go back to pipeline?
@Johnstonfamily2012
3 жыл бұрын
Why did you cut on opposite sides of the lines on the saddles?
@arosswelding
3 жыл бұрын
I was trying to adjust my cut a little because the last 8 inch cut needed some adjustment but this time I went a touch too far that way. I ended up having to trim it out just a little but it was not bad at all. Great question.
@simmonsjalen65
3 жыл бұрын
Do you do metal bending?
@RTR-eh8dm
3 жыл бұрын
What part of Oklahoma is that?
@brandoncarroll4100
3 жыл бұрын
Hey man just wondering what welding jacket are you wearing in this video?
@arosswelding
3 жыл бұрын
Martin brothers welding shirt. Real good material, made of mountain cloth. We actually sale them on my website. Arosswelding.com/shop It may say out of stock on some sizes but we have more in, we just have to inventory them, then we will have them back up for sale on the website.
@brandoncarroll4100
3 жыл бұрын
@@arosswelding sounds good I’ll look into it thanks a lot
@kuldeepklair6901
3 жыл бұрын
M also studied in welding sir What scope of welder in ur country What type of study need for job
@chrisborrego2741
3 жыл бұрын
How do you get into the Union
@SegoMan
3 жыл бұрын
I don't think the X Ray hand is gonna like being hung off the stinger on that tractor!
@carthius
3 жыл бұрын
You wouldnt happen to know someone looking for an apprentice welder do you?? Got my 1-4G (almost had 6G) I live in Texas but trying to move out.
@brianbass4519
3 жыл бұрын
I don’t think we’re in Kansas anymore todo have you ever heard that ha bet not jk love your videos
@arosswelding
3 жыл бұрын
Lol yes I have! I watched that movie as a kid!
@zachbudde1431
3 жыл бұрын
Do you run a journeyman or performer ?
@arosswelding
3 жыл бұрын
I believe mine is the performer.. whichever one is the smaller one.
@zachbudde1431
3 жыл бұрын
@@arosswelding thank you that's what it looked like. I have a big journeyman and was thinking of adding a smaller performer to my shop
@zachbudde1431
3 жыл бұрын
Thank you for putting out your videos I always wait to see what your new video is every Friday
@Badweather12
3 жыл бұрын
SE OK? If so what part?
@arosswelding
3 жыл бұрын
South of Mcalister
@tophand1918
3 жыл бұрын
The one time you do saddles I've been wanting to see and you dont film it, super disappointed
@jorgemartinez6757
3 жыл бұрын
Que tal buen día, oye sigo tu canal y me interesa mucho el contenido que subes, soy de México te quería preguntar sobre si sabes algún trabajo de gasoducto allá, tengo una semana que sali de uno pero me interesaría emigrar para allá y trabajar en uno... Te agradeceria mucho si me ayudarás soy ayudante pero yo era el que hacia la limpiesa mecanica de la SOLDADURA
@leviburlingham5859
3 жыл бұрын
Hey Arron, how do we join your mighty networks inner circle?
@arosswelding
3 жыл бұрын
Here is a link arosswelding.mn.co/
@stevensaxon8888
3 жыл бұрын
@@arosswelding great video. What part of Oklahoma was this entryway?
@arosswelding
3 жыл бұрын
South east
@arosswelding
3 жыл бұрын
It is Beautiful down there isn’t it?
@stevensaxon8888
3 жыл бұрын
@@arosswelding my guess would have been the northern part of the state.
@jackrossiter7981
3 жыл бұрын
What is the point in these thing that u built
@Bigsoot7393
3 жыл бұрын
Just for show for the farm entrance
@chyps9186
3 жыл бұрын
Use to follow the old channel just found this one is he divorced now?
@arosswelding
3 жыл бұрын
Negative. Still married. Glad you found the new channel!
@oklahomachris6298
3 жыл бұрын
Oklahoma men have ways of doing things usually not OSHA approved lol. Why does ads always have to cut you off when your explaining something lol?
@benitoramos6067
3 жыл бұрын
You don’t think it’s faster to use the chip saw on cutting pipe .. clean cut instead of torch .. that way you don’t have to grind
Пікірлер: 132