I know a lot of people didn't find it helpful, but it helped me. I needed to see how the battery contacts were connected on the inside. One of mine came loose.
@DBMoshua
11 ай бұрын
Battery contacts come loose can cause it not to work or turn on especially when replacing battery. Had this problem multiple times. Video was helpful in finding out how to take this thing apart.
@sjshady0169
8 жыл бұрын
this is the biggest pos thermostat I've ever used.
@pamoffa
4 жыл бұрын
You have the jokers making snide comments, that's normal for people that don't like to learn. Thanks for opening it up and showing it. The poor soldering on the pins was interesting.
@mighteemomoa748
3 жыл бұрын
Thanks! Just moved into a house with one of these.....
@amyostler5395
6 жыл бұрын
Thanks this helped me find out how to open it .👍 couldn't for the life of me lol
@PatriciaW.
3 жыл бұрын
Thank you! I thought I would never find the right video. :)
@davegeiswhite8593
2 жыл бұрын
Thank you ! Very helpful ! I repaired my own !
@justntime6750
5 жыл бұрын
Battery Clip fell off mine. Superglued it back in place to fix
@maryscoville1261
5 жыл бұрын
Thanks for showing me how to change the batteries.
@bdwestfall74
6 жыл бұрын
Thanks had the same thermostat it stopped working wasn't sure why and used your video to pull it apart and one of the battery clips had fallen off
@justntime6750
5 жыл бұрын
Same issue. superglue it back in place. Works fine again
@ultraman5068
5 жыл бұрын
I had one sitting in my closet for 10 years lol. Brand new in package. Just installed. Works fine but doesn’t light up. Very disappointed in that. I came here to see if I was missing something 🤷♂️
@zr20s
8 жыл бұрын
I have one of these and they suck. it's was always 1 or 2 degrees off. probably why they are discontinued.
@sanitary103
7 жыл бұрын
I have this POS. does anyone for the life of me know how to turn off the auto program so I can simply turn it off and on when I want to?
@FOGHEAD_
7 жыл бұрын
sanitary103 I need an answer to this as well
@sanitary103
7 жыл бұрын
I found out how to do it for the exact model. I can't speak for others but I assume they are similar.... I don't have the thermostat in front of me so bare with me. the key is to press mode. press it until all you see is the current temperature, time and day; if there is a house emblem/picture to the left, that simply means you are in one of the auto programs (1-4). if you press mode a few times, the house/picture should go away. once you do that, you are in the clear. when I want to use it, I simply turn the tab to cool or heat and for the fan, I use "on" and not auto. if you need further instruction, if you google your model type, they actually have a customer service # to call to help you. hope that helps.
@SingCheongChen
6 жыл бұрын
Hold the "Mode" button for 3 sec, and you will see the house icon disappear. This is to put it in manual Hold mode. Set the temperature to outside the range, so that the HVAC won't run. When you want to resume the Auto mode, press the Exit button
@nata3116
5 жыл бұрын
Thank you! It works.
@XxbDonxlittyxX
5 жыл бұрын
@@sanitary103 you sexy bastard !!! Thank you !
@TeamToguro
6 жыл бұрын
After replacing the batteries on mine, I can't get the screen to power on? Was something jarred loose when prying out the old batteries from deathgrip of this monumental pile of crap which is this thermostat? If so, any ideas on how to solve this issue?
@palomapardo1744
6 жыл бұрын
John Paul Caldwell make sure you are using brand new alkaline batteries and not rechargeable ones, also you can try put them backwards and wait 30 secondes (this wiil reset thw thermostat) then you can place them back in the original positions and check if it works :)
@ozman1966
Жыл бұрын
HE -Heat electric & HG - Heat Gas
@srjohnny2010
3 жыл бұрын
How do I change it from ferinheight to Celsius
@JohnwinningCorless
3 жыл бұрын
Hold down the up and down arrow until it starts flashing and then you can choose either or. Hope this helps.
@bridgets4864
7 жыл бұрын
Mine will not turn on after battery replacement. Any suggestions?
@gregnixon1296
7 жыл бұрын
Magica_High_Elf _Archer Setting the time after a battery change is what mine needed to get it to work again.
@mookied.6181
5 жыл бұрын
What kind and size screw driver is that
@pamoffa
4 жыл бұрын
It's a size double d
@1w598
5 жыл бұрын
Video not helpful. Worst thermostat ever made!
@BuellFranklin
7 жыл бұрын
I can't get the fucking cover off
@SingCheongChen
6 жыл бұрын
When this thermostat is new, the front face plate is really seated very well and tight. I tried to 1 week, and can't figure out. After using brute force, and study the latches, then I realize how to remove the face plate cover. Pull the cover downward, and lift the bottom upward in 45 degree. This will loosen the latch at the bottom
Пікірлер: 45