Noticed when you touch the platter your mic or audio buzzes. Sounds like bad grounding
@djcal623
Жыл бұрын
thank u for the honesty...im a pioneer guy...im getting close to a upgrade of my ddj 1000 of course im looking at the flex 10 but rane caught my eye as well. you are the 3rd you tuber to have mentioned issues with these units. i will pass this along to my friend who is interested in the rane 4
@9juanjuan624
6 ай бұрын
Was super excited to buy this unit. After reading all the comments and finding so many folks complaining about it, I have decided to go to Pioneer. Rane already screwed me over $2100 with the: Rane 68. They literally stole my money. I am not spending another dime on RANE.
@DJBpartyTV
7 ай бұрын
I've been on my DDJSZ for 10 years now and it's never been fixed. #pioneer #legendary 😎
@dennisolive1911
Ай бұрын
When my 4 went to shits, I went back to my SZ! Flawless
@DJBpartyTV
Ай бұрын
@@dennisolive1911 💪🏾😎🤙🏾
@user-bz5hw8kk9m
Жыл бұрын
Hi, I am from Europe - Czech republic. And I have the same issue with Rane Four - left platter has issues in vinyl mode and time to time it stops working 😢. I like a machine a lot with all its functions, but as I read this is common issue and nobody has a solution for it I will go back to Pioneer. With previous controler DDJ 800 everything worked as expected.
@mattgross1143
Жыл бұрын
The rane one is amazing. No issues.
@joeydurham3493
2 ай бұрын
I’m a diss jockey. I’ve never had a problem with this consul. The rane four it was my number one choice because it has the voiceover button on it and that was very important to me as a disjockey nothing against you or anybody else in these comments but I don’t scratch so I don’t touch the jog wheels there’s a big difference between scratch DJs and dis jockeys your probably a scratch dj me. I’m a dis jockey a dis jockey plays music blends songs, fades music in and out and doesn’t have any dead air except for when they talk again I’m not scratching, but it’s not my thing. Take care of everybody. Thank you for your video sir. Keep spinning keep making the people smile that’s what it’s all about.
@Andrei_and_music
Жыл бұрын
Hi Man. Yes, same problems with mine. Hi from Philippines
@Iamdprice
Жыл бұрын
How long have you had your Rane Four
@doewe310
22 күн бұрын
Dealing with my first exchange right now. Had to buy a rev1 just to have something on deck.
@g-track5065
8 ай бұрын
I'm so glad you did this cause I have issues with the MK12 did you get that issue fixed and how. We pay too much money to go through this.They need to recall them all back and fix the issues or give us something that doesn't have issues . Work too hard for this
@olorunbabami7591
6 ай бұрын
Firstly, try it with a Windows laptop 💻 because the same issue occurred when I was using the Pioneer DDJ SX3. When I used my Windows laptop, everything worked without any issues. However, when I went back to my MacBook Pro, the issues returned. What I did to resolve the issues was to reduce the sensitivity of the platters. Since I reduced the sensitivity of the platters, my Pioneer DDJ SX3 has been working fine till today. If you try the same method with the Rane 4, it might work.
@joeydurham3493
2 ай бұрын
I’m a diss jockey. I’ve never had a problem with this consul. The rane four it was my number one choice because it has the voiceover button on it and that was very important to me as a dish jockey nothing against you or anybody else in these comments but I don’t scratch so I don’t touch the jug. there’s a big difference between scratch DJs and dis jockeyyou’re probably a scratch me. I’m a jockey a diss jockey plays music blends songs, fades music in and out and doesn’t have any dead air except for when they talk again I’m not scratching, but it’s not my thing. Take care of everybody. Thank you for your sir.
@djmikeyt9168
10 күн бұрын
I have the same problem with my right deck. Same issue with it not grabbing in scratch mode.
@Dj2knitro
Жыл бұрын
I think its a ground issue bro. My other controllers do the same thing. Its something related to the stuff plugged in the outlets.
@Iamdprice
Жыл бұрын
I think your right it’s definitely a ground issue with this controller something has to be defective with the internal components
@Dj2knitro
Жыл бұрын
@@Iamdprice a lot of em do it idk why they haven’t figured to out yet the cause & tell the people.
@GuvnaDnBonPC
9 ай бұрын
its definitely a ground issue, if you touch the metal of the unit while touching the platter the issue seems to go away. I just give the side a tap before i touch the platter. The top is not metal, the side is. try it it works for me, theres also a metal screw each side of the fader (put a pinky on it lol). I also had a unit with the orange font but the left platter was DOA. My replacement has white but this issue also @@Iamdprice
@popzjrhoc6551
8 ай бұрын
I just purchased the Rane Four and after two days of ownership Im experiencing the exact same issue. I thought I was just cuttin & scratchin too much. I'm disappointed after having such anticipation, now I have to go thru the whole return process for a replacement. This suckxz lol!!
@Iamdprice
8 ай бұрын
Good luck let us know how it goes after you get another unit
@roymoxley2587
Жыл бұрын
I have had mine since April I have had no issues at all I live in Thailand so I got mine from the uk So what is wrong now with the new unit Now I have a platter problem
@roymoxley2587
7 ай бұрын
Boy I spoke to fast now my platter on the left is messed up Damn It
@Earthcitizen4609
Жыл бұрын
Rane its not the same its more a numark now
@Eyes_Open_Limit_Reached
9 ай бұрын
It wishes it was.
@djdale.5806
10 ай бұрын
Still using an NS7 10 years on. Reliable as. Ever since InMusic brought these brands Reliability has gone out the window. I’m getting a pioneer rev 7
@djsoo
7 ай бұрын
rev7 has tons of issues too - i think it's just been a problem with manufacturing in general over the years
@djdale.5806
7 ай бұрын
@@djsoo Yes I have my rev seven. Hasn’t given me any problems yet but I’m a bit skeptical.
@djsoo
7 ай бұрын
@@djdale.5806 just check out any forum and you’ll hear a ton of issues with the platters. I’m sure it’s still a minority - probably much like this issue in the video
@Persistent_Pocket_Bullies
28 күн бұрын
I have the rane performer just got it,hooked mic up to stream the ppl saying they can’t hear ishhhhhh,in plugged in like 4 different mics
@jerrychisholm8565
Жыл бұрын
i agree my rane 4 is doing the same but i figured it out and its working fine now...
@Iamdprice
Жыл бұрын
I’m starting to think it’s a grounding issue
@CustomOneOffs
Жыл бұрын
Did you do something to ground it, or what did you do to figure it out?
@TheDjimmel
Жыл бұрын
What's the solution? Ihv tried everything
@djseriousgotowork7528
11 ай бұрын
???
@djokomensah9945
11 ай бұрын
@jerry how did u figured it out.. please share
@vicfury226
Жыл бұрын
Smh i have the same problems with my rane four & the bpm was was off not able to use the stem mode it wasn’t working I sent it back 3 weeks ago waiting for my replacement I never had this issue with pioneers equipment
@djbraxton254
10 ай бұрын
Which pioneer is best to buy
@daddylewis9688
9 ай бұрын
Yea my Rane right jog wheel has the same issue, I really love the unit. It is built like a tank but I have to send it back.
@Iamdprice
9 ай бұрын
I sent the 3rd Rane Four back on Monday Dec 4th I’ll have a forth replacement unit I have had the Rane Four for 8 months and still have yet to have one work properly I’m over it and selling the replacement at a loss to anyone that wants to deal with the issues maybe this refurbish unit that I’m getting in place of a new I originally purchased will work 🤷♂️
@KodiDonCo
Жыл бұрын
I had the same issue with my FOUR I just sent mines off for a replacement smh.
@DjTecniq
7 ай бұрын
Try changing the power cable? This sounds like a grounding or issue with your outlet/power strip?
@Javarrol
6 ай бұрын
Just got my rains in the mail. No issues yet …
@Iamdprice
6 ай бұрын
Good luck
@campos1227
Жыл бұрын
I am currently experiencing this, it happened to me one time and also I was doing a session where the Rane fours went in an idle mode I couldn’t press my samples and the digital screen kept saying rane fours and it was spinning. I couldn’t see the next track on them.
@Iamdprice
Жыл бұрын
Did you contact Rane
@Djdani_isla
Жыл бұрын
Hello! I'm from Mexico and I have the same problem with my Rane Four! the right chainring stops scratching! so far I don't see any solution from rane company
@Iamdprice
Жыл бұрын
Rane needs to come up with a solution fast
@Dj2knitro
Жыл бұрын
Ground issue try that 1st. Just have the controller and nothing else being used with the outlet around it and see if the issue goes away. I have a reloop 4 does the same thing you guys are describing. Like idk whats going on with these controllers but its a controller thing. My roland 505 same thing.
@Dannyfr33sh
Жыл бұрын
One solution could be to connect your rane to a different power surge protector. Don’t connect your rane same surge as speakers etc
@xDjxBlack-lq6sl
11 ай бұрын
Sorry to hear the bad news that's why I told everybody keep your old equipment ain't nothing wrong with the old equipment you got to watch this new stuff why you think they keep coming out with it but it look good ain't nothing but a software you put on your old equipment you just got to learn where everything.
@DJSHADDY2K7
11 ай бұрын
So the company Rane one Have even contact you on the issue with your Dj controller?
@Iamdprice
11 ай бұрын
Yep I was sent a replacement unit
@roymoxley2587
6 ай бұрын
Ok I think I found the issues it’s a ground problem inside the way they try to ground the circuit boards You have to open it up to see what I have found out it’s poor engineering.They have the power ground wire going screwed on the bottom plate then under that same cover there are places that were bare metal to ground the circuit boards. I have already taken it apart and cleaned all metal contact places it has definitely improved the problem I had ,when slowing down or speeding up the side of the platter the platter would act like I had my hand on top it now does not do it but a few times in one hour testing , but it’s not 100 percent. I’m going to run small wires to where it needs to be grounded better as I pretty sure that’s the issue. I’m not able to send it back due to where I live and where it came from so I’m trying to solve this on my own.
@marclongshore8519
4 ай бұрын
I have the Rane One and its new with volume issues and the Right side platter speeds up on its own .
@Iamdprice
4 ай бұрын
Wow
@Mdnesseptx
11 ай бұрын
You can hear a buzz when you touch platters
@bigred2262
10 ай бұрын
old numark ns7 still my go to =/ sorry
@Earthcitizen4609
Жыл бұрын
I never buy the first gen of a product
@misterluxu3886
Жыл бұрын
Yup
@andyscott1608
8 ай бұрын
Thank you bro ain't going nowhere near this shit now , I suppose us real djs the ones that scratch n cut need the technics 1200 mk2 a proper turntable thank god a own them sync beat djs be like its cool i can still use it lol Thank you bro 🙏
@roymoxley2587
6 ай бұрын
Ok if you want to fix the issue it’s a ground problem inside the unit I have fixed mine works just like new no issues at all
@mickyg7237
Ай бұрын
How did you?
@djcoolcliff
7 ай бұрын
Wow!!! Thanks for the video and I hope you got a refund on the Rane 4!!
@Iamdprice
7 ай бұрын
I wish
@djcoolcliff
7 ай бұрын
@@Iamdprice man that’s crazy bro and here I was contemplating selling my NS7II. I think I may try that T7. Thanks man!
@douglaslewis1020
10 ай бұрын
A lot of this is in the settings use virtual dj easy settings to set up any ddj
@dogginu1
11 ай бұрын
I have a channel issue... I have to use channel 4 for channel 2 cause it just won't work. when I use the stems they are high pitched and not staying volume level. I will stay away from Rane as well bro I feel your pain $1700 down the drain.
@JacquesEarly
6 ай бұрын
I just got the updated rane four mines working excellent i waited for mines because these are man made its always room for flaws even in human beings 😂
@P2Feener305
Ай бұрын
Mines isn’t a word. Not how you’re using is.
@nekeitojmibohnsonjohnson2614
9 ай бұрын
Wow all this money for a player to be defective
@DJPOPAAL
Жыл бұрын
The microphone sounds horrible on the Rane One also I’m going back to Pioneer.😩😩😩
@Iamdprice
Жыл бұрын
I wonder how Rane dropped the ball so bad
@rhythmron8473
Жыл бұрын
I’m have several issues with my Rane One from the FX cutting in and out, the track loading in the middle of the song and when I load a track for the other platter everything freezes 😡
@roymoxley2587
7 ай бұрын
Mine left platter is now acting up Damn it it’s not even 1 year old
@Earthcitizen4609
Жыл бұрын
Does it have orange letters about cue points enstead of white?
@misterluxu3886
Жыл бұрын
Heard orange one is better
@Earthcitizen4609
Жыл бұрын
@@misterluxu3886 im tired of the crappy pioneer non moviing platter dj controllers
@Earthcitizen4609
Жыл бұрын
@@misterluxu3886 im verr tempted to buy this
@STATEMENTNYC
Жыл бұрын
The mic on mine sound horrible the up fader on channel 2 shots out
@zomaster8729
Жыл бұрын
Bro, I'm having the exact same issue with upfader on channel 2. It's painful and upsetting. The platters too. I thought was only me. I email rane they told me to use dust spray. I did that and still No change. I sent them a follow up email and now waiting. I'm so so upset.
@misterluxu3886
Жыл бұрын
So everybodys mic sounds horrible
@badslipmats
9 ай бұрын
It’s ur usb cable ?
@Iamdprice
9 ай бұрын
No my board has an issue Rane has it now investigating the problem I’ll update as soon as Rane finishes
@oldschooldjernie
7 ай бұрын
That's too bad. I would sell all that shit and get either 2 CDJ3000's or 2 SC6000M's and a used Pioneer s11 mixer. Used, i would get 2 CDJ2000Nexus or two SC5000M Denons
@DJMKC24
11 ай бұрын
I have the same issue with the Rev 7
@Iamdprice
11 ай бұрын
Wow I wonder what’s going on with the quality of products
@mahiawelly
9 ай бұрын
china thats it @@Iamdprice
@Mr3101winston
Жыл бұрын
yes my Rane four have the same issue
@Iamdprice
Жыл бұрын
I really hope Rane figures out this problem
@radientproductions9799
Жыл бұрын
I have a rane four and the mic quality is horrendous , also the filter is basically dog shit on each channel. I have yet to send it in.
@jessemackenzie6516
Жыл бұрын
Scratching seems off with mine. I can't put my finger on it but it feels off. I can scratch 10 times better on my flx 6. It's like my cross faded cut it in to late. Just doing chirps is difficult . Has anyone had any issues like this?
@Iamdprice
Жыл бұрын
Did you adjust the cut in for the fader ?
@Hp4Z
4 ай бұрын
Almost all motorised midi devices are like that, and have been since the scs1d.
@jessemackenzie6516
4 ай бұрын
@@Iamdprice Yes, I have done everything including lowering the driver buffer
@ranjitbhambhra5165
6 ай бұрын
My faders on the rane one are bleeding music, to change the it's a nightmare. Don't buy Rane
@ranjitbhambhra5165
6 ай бұрын
These rane products have cheap numark parts stick to pioneer
Пікірлер: 107