I just finished my Dodge Truck with the Raptor Liner. Dodge Trucks from 1994-2000 all have the same paint problems. Clear coat comes off and then the fading starts. I decided to use this product on my truck since it sets outside. Its a great product and popular among the four wheel drive community for durability.
@miked.r.6671
5 жыл бұрын
Turn out pretty good? Has UV protection & super durable...Mine is only weeks old, but others that done it few years ago seem to be happy with how its holding out! Id like to do my boat & fibreglass camper with Raptor !
@timatchley3862
5 жыл бұрын
@@miked.r.6671 Mike, it turned out great. The secret to making this stuff last is the prep work. Sanding, priming bald spots and a good thorough wipe down before spraying. To be honest I hated the taping and masking part worse than anything, very time consuming but important to having a good paint job.
@timatchley3862
5 жыл бұрын
Mike I forgot one thing, after sanding I pressure washed the entire truck before taping and masking. Then I did a wipe down with mineral spirits just to make sure the body was clean.
@miked.r.6671
5 жыл бұрын
@@timatchley3862 I hear ya dude! , The taping was very time consuming! Now that Ive done it, I can tape / mask in 1/3 the time after some advice from auto body guys! I used brake clean & mineral spirits before tape & spray.
@timatchley3862
5 жыл бұрын
@@miked.r.6671 Thanks for the video, I Raptor Lined the bed of my truck four years ago and it still looks great. I used the same methods on the truck body so hopefully it will last. Its good talking to you and good luck on any future projects.
@PopsHowTo
3 жыл бұрын
Thanks for the vid!
@fuegorc8
2 жыл бұрын
best music ever
@rickvelarde5
4 жыл бұрын
Ats awesome work guy 👍🤙
@irepresentme2196
3 жыл бұрын
This guys spray pattern while it came out reminds me of when my add kicks in
@scootermcgee3451
5 жыл бұрын
Best video on Raptor Lining a vehicle - hands down! Fast forwarding the sanding process, and all other bits that we don't need to watch. Great music. Awesome video. Great job!
@miked.r.6671
5 жыл бұрын
Thanks Scooter..Pretty happy with how it turned out..Theres another video with better shots of truck finished if you like have a look!
@scootermcgee3451
4 жыл бұрын
@@miked.r.6671 How's it holding up to our BC weather?
@miked.r.6671
4 жыл бұрын
@@scootermcgee3451 Holding out Great! Just back from a 2 week trip in Wilderness.....Hose off & good to go.. Dirt doesn't stick. The Raptor will last longer then Diapers in a Land Fill!
@MadDogMax123
4 жыл бұрын
BC represent!
@johnbrevard5966
4 жыл бұрын
That looks like BALLHANG!
@leonawarner3372
5 жыл бұрын
Nice boots and I dig the song
@kylenewton830
3 жыл бұрын
Can you use any automotive paint? How many ounces of paint per liter?
@jasont7061
2 жыл бұрын
Reminds me of a popcorn ceiling that people hate today 🤣
@miked.r.6671
2 жыл бұрын
haha Yeah, but the popcorn ceiling people scraping off would never come off if it was Raptor
@Farmor4x4
4 жыл бұрын
Raptor Paint Jobs RGV To paint a Dodge Ram Double cabin how many Raptor pots do I need? Is that raptor used or diluted with thinner or gasoline? and know if the final finish would be shiny? or is it matte? How about the dust? Does the powder stick too much? Well, it seems to me that after filling with dust and washing with water and soap, the truck would later be dull and opaque?
@AntonioHernandez-hp3kf
5 жыл бұрын
What color is that gray? Looks awesome!
@miked.r.6671
5 жыл бұрын
Thanks...Tint colour is called " Anvil" Posted another video if you like to look. Shows finished truck colour more
@nabat69
2 жыл бұрын
Good job👍 Cool✌️🇷🇺👍
@jimmylahey6033
5 жыл бұрын
Great video can you set your gun to a wider spread pattern?
@miked.r.6671
5 жыл бұрын
You can purchase similar spray gun with adjustable spray nozzle ( Vari-Nozzle) to lock the spray consistency . You can load the raptor into a conventional gravity spray gun as well , but covers nice with the one in kit . Quite user friendly product & can be used on on your backyard driveway, or a " Trailer Park " Mr Lahey!
@leec8573
5 ай бұрын
What color of gray is that.
@AndrewDoesLife
4 жыл бұрын
So you used black for the hood, what is the color of the body of the truck? Was it Basalt Grey from Raptor Liner?
@miked.r.6671
4 жыл бұрын
I used tint colour called " Anvil" I used 75 ml to every bottle or Tintable Raptor. You can use up to 100 ml, but it overfills the bottle, so 75ml is sweet. Black used on hood/ front bumper. Theres another video that shows finished job better. Really happy with results.
@machokb
3 жыл бұрын
Hey really nice job, any paint will work? Or should be with some specific characteristic?
@PeterJr1985
2 жыл бұрын
Great vid bud!! How’s she holding up, thinking about doing my truck. I see your in BC as well awesome brotha!! Keep up with the vids
@miked.r.6671
2 жыл бұрын
Thanks JR . Raptor is great and still looks like the day I put in on...I don't see any chips even whatsoever, given I take it on lots gravel roads . UV Protected & tough stuff! People say " You will Never get that off". Im like " yeah, thats the idea"! Do it ! Just spend the time prepping properly .
@cutweldngrind
4 жыл бұрын
Just finished my flat bed I built. I used 8 bottles of black Raptor.
@miked.r.6671
4 жыл бұрын
Nice Jorge! I had a look at your flatbed build....Very Nice work!
@cutweldngrind
4 жыл бұрын
@@miked.r.6671 Thanks. It's been a long time but project its reaching its end. Installed some lights today and planning for a gin pole attachment too. I actually feel like doing my entire truck now.
@ninjazxd
Жыл бұрын
What do you do for the cab under the doors and the painted inner sides of the doors? My truck is silver and i am wanting to go O.D. Green and wonder if spraying the inner sides of the doors will cause the weatherstripping to not seal against the liner paint?
@grossmeister1181
6 ай бұрын
Remove all weatherstripping and tape off the interior, did the same to my 2004 RAM 1500. Seals are working just normal.
@josephyanez3477
4 жыл бұрын
Very nice. What size compressor did you use?
@shepardzane30
3 жыл бұрын
I guess Im asking the wrong place but does any of you know of a tool to log back into an Instagram account?? I was stupid forgot the login password. I love any help you can offer me!
@wallacejulian4905
3 жыл бұрын
@Shepard Zane Instablaster =)
@shepardzane30
3 жыл бұрын
@Wallace Julian I really appreciate your reply. I got to the site on google and I'm waiting for the hacking stuff now. Looks like it's gonna take quite some time so I will reply here later with my results.
@shepardzane30
3 жыл бұрын
@Wallace Julian it did the trick and I actually got access to my account again. I am so happy:D Thank you so much, you saved my ass :D
@wallacejulian4905
3 жыл бұрын
@Shepard Zane happy to help :D
@derekmilligan
3 жыл бұрын
I'm curious as to how it has held up and how does it clean up after it gets dirty?
@miked.r.6671
3 жыл бұрын
Held up great so far, and no fading or chips . I just wash it normally with a brush and soap /water . You cant use a sponge, or it will just tear it apart . Highly recommended if you thinking about doing it. Prep is the key & time consuming. Very durable/ UV protected . Thinking about doing it to my camper/boat in springtime .
@Farmor4x4
4 жыл бұрын
You have a new subscriber. I liked your description. I have a Dodge Ram the same as yours and I want to paint it this black with Raptor producer, a question, that glossy black finish remains perennial, that is, does it not become opaque and dull when dust falls and then when you wash it it remains opaque? , is that I do not want to be spending later on silicone so that it is shiny after I wash it. and the other thing is to know if it gets dirty a lot of black color. ?
@miked.r.6671
4 жыл бұрын
The finish is actually semi gloss in appearance & has Ultraviolet protection, so you dont have to worry about it fading. It washes easily with hose & a brush. Good luck, I hope it turns out nice ;)
@MegaChieltje
4 жыл бұрын
Can you wash the car easily?
@Erikalipkovics
4 жыл бұрын
how many liters of raptor paint did you use? Thanks !
@miked.r.6671
4 жыл бұрын
I used 10 bottles of Raptor, but didn't require doing the box as I have plastic liner. The box might require another 4 bottles maybe if you do that. I did inside door jams as well ....2 coats everywhere and covers nicely at 60 PSI
@Erikalipkovics
4 жыл бұрын
J
@mxr7586
4 жыл бұрын
Reminds me of flexstone paint. Was wondering when it gets dirty how does it look after cleaning it?
@miked.r.6671
4 жыл бұрын
Dirt washes off very easily , and it seems dirt doesnt stick to it .Hose almost does it all.You cant use a sponge or it tears it up. Bucket soap & Brush..... People think its a flat paint, but its actually semi gloss finish/urethane finish. Theres another video, that shows finish better if you like view .
@TheHannible
4 жыл бұрын
I did my landrover defender with this stuff it gets very muddy but just washes off with a jet wash good stuff.
@joshuamondragon7113
5 жыл бұрын
Looks sweet I just did my 2001 tundra yesterday the prep work was the hardest. How many bottles did you have to use? I used 10 total with 2 coats
@miked.r.6671
5 жыл бұрын
Thanks Dude! I used 3 bottles black for hood/grill & front bumper.... 6 bottles tintable ( colour Anvil) for rest of truck. I have plastic bed liner, so didn't do in there. I think I will do the mirrors & spray inside fender wells soon. Yeah, the prep/tape takes awhile. I did inside the doors/jams as well. Pretty happy with how it turned out!
@dionisiohuerta5083
5 жыл бұрын
Hey do a video I have a 2001 tundra also
@Farmor4x4
4 жыл бұрын
Mike D.R. I have a Gray Ram, and I would like to know if you can send me images of your Dodge Ram truck to see the finishes. help me my brother please. or if you have an instagrans account where I can see it? Raptor Paint Jobs RGV To paint a Dodge Ram Double cabin how many Raptor pots do I need? Is that raptor used or diluted with thinner or gasoline? and know if the final finish would be shiny? or is it matte? How about the dust? Does the powder stick too much? Well, it seems to me that after filling with dust and washing with water and soap, the truck would later be dull and opaque?
@brucelee1226
3 жыл бұрын
Nice job i.want to.do.that to my big truck dodge,is it easy to.do that I want to.save money.
@Farmor4x4
4 жыл бұрын
is a Black o? is Grey?
@thepermaculturevagabond6161
3 жыл бұрын
How many bottles did you use? I ordered just four for a mid wheelbase high roof van. That won't be enough I guess...
@miked.r.6671
3 жыл бұрын
I used 10 bottles to do the job ( 2 coats) at 60 PSI
@thepermaculturevagabond6161
3 жыл бұрын
@@miked.r.6671 Thanks, yeah I just ordered 2 more boxes. That should do the job. Good luck
@bobbyhorn7059
4 жыл бұрын
How has it held up and would you do it again? I think it turned out good.
@miked.r.6671
4 жыл бұрын
It looks just like when I originally sprayed it. I sure took it to the test this year with many trips in the backroads/wilderness . No problems whatsoever with chipping or fading, and UV protection. Recommended if your considering to do it.
@bobbyhorn7059
4 жыл бұрын
@@miked.r.6671 thanks for the info
@miked.r.6671
4 жыл бұрын
@@bobbyhorn7059 Theres another video I made that shows the end result better at end video if you want look.
@joshfriend2627
3 жыл бұрын
Did you sand your whole truck before applying the liner? Do you think it will stick without sanding?
@miked.r.6671
3 жыл бұрын
You need to remove the clear coat with 180 grit sandpaper. I used scotchbrite to get in the some places as well. Proper prep is key. The Raptor will bond very strong, and still looks great with no issues 1.5 yrs later so far.
@joshfriend2627
3 жыл бұрын
@@miked.r.6671 thank you very much
@AmateurAtBest
4 жыл бұрын
Is that black or grey liner? I'm looking to do mine as well.
@miked.r.6671
4 жыл бұрын
Black on front end...Grey rest of truck. Tintable Raptor. The tint colour "Anvil" was used .
@1188dale
4 жыл бұрын
How many did you use of raptor liner
@Farmor4x4
4 жыл бұрын
Mike D.R. I have a Gray Ram, and I would like to know if you can send me images of your Dodge Ram truck to see the finishes. help me my brother please. or if you have an instagrans account where I can see it? Raptor Paint Jobs RGV To paint a Dodge Ram Double cabin how many Raptor pots do I need? Is that raptor used or diluted with thinner or gasoline? and know if the final finish would be shiny? or is it matte? How about the dust? Does the powder stick too much? Well, it seems to me that after filling with dust and washing with water and soap, the truck would later be dull and opaque? is black o gray
@jakedragsknee
4 жыл бұрын
Came out awesome! Thinking about doing my 98 Durango, any tips?
@miked.r.6671
4 жыл бұрын
Prep Work is keep....Get that clear coat off is a must ! Time consuming, but makes for better end result .Taping takes awhile! I did 2 coats at 60 PSI, and turned out really nice. Theres another video with better end result video/pics if you like to look. Raptor is very user friendly , and I really happy with how it turned out. Do It Jake!
@jakedragsknee
4 жыл бұрын
Mike D.R. Thanks for the reply brotha! Most of my clear had flaked off so it won’t be too hard remove but the good thing is the body is all straight and no rust. Interior is clean as the day it came off the showroom floor but the paint is really an eye sore to me. Thanks again Mike.
@blazerich3332
4 жыл бұрын
Mike D.R. How many bottles did you use? I have g Th e same exact truck and plan on doing this too, that’s why I’m asking
@jakedragsknee
4 жыл бұрын
Blaze Rich ended up selling it and never got to doing it. Sorry man
@blazerich3332
4 жыл бұрын
Mike D.R. How many liters/bottles did you use to do the truck, I plan on doing this and I have the same exact truck
@Cov930
4 жыл бұрын
What was a list of the materials you used for the prep ?
@miked.r.6671
4 жыл бұрын
80-180 grit to get that clear coat off...Some scotchbrite to get into the harder places... Brake clean / Primer all bare metals....Adhesion promoter to all plastics prior to paint ( two coats )
@thespig13
5 жыл бұрын
Any problems with not having a bigger air compressor? I'm thinking of doing this but don't know if my air compressor is big enough
@miked.r.6671
5 жыл бұрын
Shouldnt be a problem, but you will have to take your time & wait as your compressor loads up the tank, so your PSi doesnt fall. I sprayed around 60 PSi . You have about an hr before bottle gets hard, so plenty of time , and do one section/bottle at a time . Add Hardener.....Shake N Shoot....One bottle at a time.
@thespig13
5 жыл бұрын
@@miked.r.6671 right on... i believe my air compressor is a 4 gallon and the vehicle i'm going to do is a jeep so there isn't as much surface area to cover. The kit i was looking at was the gallon or 4 bottle kit, you think that'd be enough? 2 door soft top yj jeep
@miked.r.6671
5 жыл бұрын
@@thespig13 Hmm... Id say you might be cutting it close with 4 bottles...I know other guys with jeeps who said they used 6 bottles , but also did bumpers with 2 coats . You just goin black?
@thespig13
5 жыл бұрын
@@miked.r.6671 No its gonna be a tan color... the jeep is already a tan color so I'd thought I'd match it
@miked.r.6671
5 жыл бұрын
@@thespig13 Right On! I was going to go Desert Storm colour with Black but decided closer to match best
@martinrios5401
4 жыл бұрын
No tiger stripes? I've always been afraid of doing it because I'm afraid of getting tiger stripes
@miked.r.6671
4 жыл бұрын
No Tiger Stripes....Covers very nicely with 2 coats, and its more of an undercoating type gun, then traditional sprayer...As long as you keep gun at same distance & get the psi you like, its very user friendly....I liked 60 PSI texture & turned out very even. Do it!
@martinrios5401
4 жыл бұрын
Thank you!!!
@rvrandy1710
3 жыл бұрын
I bet this will put an END to Arizona Pinstripes :-)
@OMiskell
Жыл бұрын
What color did you use
@miked.r.6671
Жыл бұрын
Tin colour is called "Anvil"
@YahwehNissiTV
5 жыл бұрын
What color did you use?
@miked.r.6671
5 жыл бұрын
Tint colour is called "Anvil" I used 75 ml to every bottle
@aux1z11
4 жыл бұрын
I'm doing mine in camo green brown and black
@miked.r.6671
4 жыл бұрын
Sweet! I thought about doing some cool Camo pattern, but more work. Are you going to Post a video?
@denverrodgers71
4 жыл бұрын
where did you get the anvil paint color from?
@miked.r.6671
4 жыл бұрын
Tint colour is called 'Anvil" from any auto body supplier. I added 75 ml to every bottle of Raptor . You can use up to 100 ml of tint to every bottle. Of course, make sure you purchase the tintable raptor ;)
@juniorbaez732
2 жыл бұрын
How’s it holding up ?
@miked.r.6671
2 жыл бұрын
Holding up just great. No chipping. No peeling...No fading.. Maybe I will make a video soon. Really happy with it actually!
@NortheastTow
4 жыл бұрын
Is this charcoal metallic?
@miked.r.6671
4 жыл бұрын
Paint Tint is called " Anvil" Raptor has a semi gloss look to it & not flat, but also UV Protected
@austinmurphy8534
2 жыл бұрын
What color was that
@miked.r.6671
2 жыл бұрын
Tint colour is called 'Anvil" from any auto body supplier. I added 75 ml to every bottle of Raptor . You can use up to 100 ml of tint to every bottle. Be sure you get the tintable raptor .
@housemachine509
4 жыл бұрын
Any tips to avoid zebra or striping?
@miked.r.6671
4 жыл бұрын
Too Wet / Too Close = Tiger Stripes. So, just avoid that & your good House Machine! Raptor is very user friendly, so as long as you keep it consistant, you shouldnt have any problems. I stuck with 60 psi for both coats, and got no Zebra, Tigers, or Lions.......Oh My! ;)
@housemachine509
4 жыл бұрын
Mike D.R. Thx Mikey 🤙🤙
@glennhiggins4306
4 жыл бұрын
Nice work (like that you did the letters too) - I customised my X5 and finished it with raptor (youtube X5 offroad beast - it's a little slide show), gets more attention at car shows than anything else there - will be doing more projects in the future.
@miked.r.6671
4 жыл бұрын
Had a look at the X5 Offroad Beast.....Looks Sic! Nice Dude! Theres another video I posted with better end result video/photos taken if you wanna have a lookie
@Farmor4x4
4 жыл бұрын
@@miked.r.6671 what is dad video please? I' want whaching video
@carlosgomes2579
4 жыл бұрын
How long is this in you truck
@miked.r.6671
4 жыл бұрын
Been about 6 months on truck now.
@gfrank8058
4 жыл бұрын
And just think, you too can get that same texture as your living room walls. But wait if you order now, we' ll throw in a free application device for only shipping and handling charges. Go ahead you know, you can't stand it.
@miked.r.6671
4 жыл бұрын
Hmmm .. Now you got me thinking Frank ! Put that free Undercoat spray gun to use & Raptor my Livingroom, Bedroom & shower even! Everything but the toilets & Bathtub! That might hurt! With proper preparation, that Raptor sticks to anything! lol I wonder if anyone has Raptored a Mtn Bike?
@andrewchristy8719
4 жыл бұрын
How is it holding up
@miked.r.6671
4 жыл бұрын
Great dude... Theres another video with better images of end result. Took it on 2 week trip in wilderness. Mud doesn't seem to stick to it...Rinse off with hose...Super durable Im sure it will last
@ahill6858
4 жыл бұрын
What was four total price to do this?
@keltongreen3820
4 жыл бұрын
around $200
@kellybehunin4448
4 жыл бұрын
1:30 ... Don't use Walmart or Autozone brand products...
@miked.r.6671
4 жыл бұрын
Thanks for the tip ;) Adhesion Promoter was a Canadian Tire Product
@marcosvigil8429
3 жыл бұрын
How many cans man ?
@miked.r.6671
3 жыл бұрын
I used 3 bottles black for hood/grill & front bumper.... 6 bottles tintable ( colour Anvil) for rest of truck. I have plastic bed liner, so didn't do inside the box man ! 9 bottles total 75 ml Tint to every bottle
@jasonups5386
5 жыл бұрын
It’s obvious it was your first time. Cousin has it done and the right way. Had it done to his 86 Suburban. Two tone and I must say it looks amazing. Few hundred dollars more that’s the way to go. But hey keep learning 😉
@miked.r.6671
4 жыл бұрын
Well, if I end up trading in my truck for a 86 Suburban, maybe your Cousin can hook me up, if only few hund more LongDuk ;)
@humbertorosales2515
5 жыл бұрын
Where you buy the paint
@miked.r.6671
5 жыл бұрын
eBay / Amazon to purchase Raptor Liner .
@humbertorosales2515
5 жыл бұрын
and the anvil painting where
@miked.r.6671
5 жыл бұрын
@@humbertorosales2515 Paint code for anvil PPG CODE 933726 Gray. You would have to buy tintable Raptor . You can get the tint "Anvil" at a body shop or auto paint supplier. I used 75 ml of tint to every bottle, but can use up to 100 ml.
@humbertorosales2515
5 жыл бұрын
Ok thanks for the information you did a great job with your ram
@transportationhoangfthijof5602
4 жыл бұрын
kyler murray
@1188dale
5 жыл бұрын
How many did it take to spray the truck
@miked.r.6671
4 жыл бұрын
I used about 10 bottles in total
@yomommasgardener9648
4 жыл бұрын
You messed up
@miked.r.6671
4 жыл бұрын
Yeah, I allowed comments on my channel lol
@gsgaud
4 жыл бұрын
@@miked.r.6671 your right. Fucking every fucking body has a negative comment. Much love bro rock on do your thang!
@miked.r.6671
4 жыл бұрын
@@gsgaud Thanks Mike. Yeah, it Helps Them Cope with Their Low Self Esteem ! These AA holes ( 1st A = Anomymity) are always the ones with no videos themselves lol Rock On Brudda !
@gsgaud
4 жыл бұрын
@@miked.r.6671 yup!
@carlosgomes2579
4 жыл бұрын
Hi
@22chiwi
5 жыл бұрын
Great vid music was cool 2 what else you do to the truck
@miked.r.6671
5 жыл бұрын
Thanks :) Not much done to the truck aside from 2" leveling kit / ...Rancho RS 900S Shocks./ Air Bags ..Edge Milage Max tuner....FASS Air Intake....BD Diesel Lift Pump. Straight Thru stainless Exhaust, and just took out the Turbo Silencer Ring, for That Turbo Whistle sound thats so Kewl like a Jet Aircraft !
@lennybaldacchino
2 жыл бұрын
hope your name is not called THE RAOD RUNNER way to fast man,
@krasnaludek298
4 жыл бұрын
The REALITY that you have to go through all this effort is due to an owner being a slob & not taking pride in their vehicle. I’ve had cars & trucks that are 20+ years old with no paint issues, because I get off my ass & wash + wax + seal the paint. This is also why I park away from people in lots - too many cockroaches that don’t care.
@bradleycrenshaw6778
2 жыл бұрын
I bet that you are a freaking blast at parties. Wait, What ? What do you mean that you never get invited to any?
@chrisao1987
4 жыл бұрын
👎🏻 on the black hood
@miked.r.6671
4 жыл бұрын
Yeah, I sometimes like it....Sometimes not so much Chris lol I may repaint hood in the spring & Raptor my Boat/Camper while Im at it. I might even tape off my head and Raptor paint some hair on Dude! This stuff is The Shit!
@michaelgehring921
4 жыл бұрын
Looks blotchy
@sammymanning6898
4 жыл бұрын
Ya can't polish a turd lol.
@jadelavallee5732
2 жыл бұрын
What’s colour did you use.
@miked.r.6671
2 жыл бұрын
Tint colour is called "Anvil". Raptor comes in black ( Non tintable) and tintable version .Add 75-100 ml tint to each bottle . Shake n shoot. Still looks like new after 2.5 yrs!
Пікірлер: 156