I got a hod red that needs small touch up, but for the spray can I only find in flame would it still match?
@tsteel80
4 жыл бұрын
Are the rattle cans a viable option for people who don't have an air compressor. I just want to do the bumpers and flares on my Jeep but the linex guy wants close to two grand!
@sadsciuidae3425
Жыл бұрын
just finished painting my Ram but was short paint a quart of Mesa Gray. I ordered a quart kit for TCPGLOBAL but wll take three days to get here ... what should i do to prep the final spray ?
@charlyperez1636
3 жыл бұрын
Best product ever... my CJ7 new look thank you guys
@Weasel84x
5 жыл бұрын
I think I'm going buy this for my atv. With it being a standard size ATV I'd suspect I'd need a can of adhesion promoter. And how many cans of the 2k? I'd think 3 would be enough.
@UPOLRaptor
5 жыл бұрын
Hi Weasel, For that I would get 5 cans. You want to put on a texture coat for the second coat and the cans empty out fast.
@king0cans
5 жыл бұрын
Interesting.
@deankay4434
3 жыл бұрын
Just great! I grew up on a family farm and never got allowance. Making money the hard way, working, I go to Eastwood to buy the chassis black that is their best while retired and fixed income. You younger guys, wife stays home to raise the kids, you pay for it at retirement. So my kit shows up, not dented, not leaking, like others I bought materials from. So I place the product in order of future use, mark it and store in cool dark location. It had not been three days as researching these products for my vehicle and last built, it want it to be enjoyed by grandkids. Then Bam! Here is chassis silver, three times better than the crap I just got, plus it is cheaper. I hate gambling period, been to Vegas twice on business, never dropped a nickel. Then researching Raptor, a “Upol” line I helped shoot my youngest son Monte. Great stuff. Bought a case and the only gun that works. Mark it, store it, cool dark high & dry. Now this. What’s next. I will be mowing my grass, bad back and all, then hear a noise! Just in time to see an engine mount crack off a passenger jet. While that part of town planes come on approach, it will land on me. It’s like the “Forrest Gump” of bad luck coming to a guy who worked dealers, independent shops and mostly imports...the hard ones! My build my never get done with Drs. poking needles in my spine, cutting me open and screwing in metal hardware, yet living on dimes & nickels, at least my back will quit hurting. NIASE Master Tech since 1978 - Forced to Retire. Loosing my ass! dun..
@kilofrinzztv2370
2 жыл бұрын
Wut
@deankay4434
2 жыл бұрын
@@kilofrinzztv2370 it is in English. I am done with / Eastwood. Good luck with the reading classes!
@stovepipe671
3 жыл бұрын
i got a 1998 chevy s10 how many cans do i ned to do the bed
@trevorbraden5448
4 жыл бұрын
If you rough sand metal or aluminum do you need to prime it first
@adalbertogonzalez566
4 жыл бұрын
I am from Venezuela and I would like you could tell me where I can buy the painting but in beige. if you recommend a link. since I only see pure black color
@timothythegreat6294
2 жыл бұрын
my favourite host ! 😎
@pandoxno3
4 жыл бұрын
can tint the White Raptor liner with any tint you want? Or do you have to buy the extra tintable version of Upol?
@johncrone3612
3 жыл бұрын
This would work great for gun grips.
@zumezoom9593
3 жыл бұрын
do I need to spray primer before i spray the 2k aerosol?
@hannible1002
5 жыл бұрын
How many spray cans will I need to cover my land rover defender hard top including the roof? Thank you.
@rancemcdonald
4 жыл бұрын
I'm trying to do the underside of a boat and can't flip it. What angle can the spray gun operate? Can I point it straight up and straight down?
@lk6912
3 жыл бұрын
Lol why would you do under a boat? Won't that make it less smooth?
@luburlubur5021
4 жыл бұрын
Can I use adhesion promoter instead of primer on bare metal and filler?
@peteshelby21
4 жыл бұрын
Did he do demo for eastwood?
@matt9741
4 жыл бұрын
Hello, I am doing a ram 1500 chrome rear bumper in this stuff, can I just scuff and spray? I purchased the store raptor liner but it was not the 2k stuff, it just said raptor liner and it was an aerosol can with a black nozzle, should I go back for the 2k stuff or will this stuff be good as well?
@chrisspence5319
5 жыл бұрын
I have a Land Rover already in raptor, but want to change my colour. Can I raptor over it?
@UPOLRaptor
5 жыл бұрын
Hi Chris, yes you can :) Scuff it with a red scuff pad, clean with wax and grease remover, apply the next coat of RAPTOR. Hope it helps.
@chrisspence5319
5 жыл бұрын
U-POL That’s great thanks for the quick response.
@mattwatkins4417
4 жыл бұрын
Is the gallon kit 4 separate bottles?
@UPOLRaptor
4 жыл бұрын
Hi Matt, yes! The gallon kits comes with 4 separate RAPTOR bottles, and also 1bottle of RAPTOR Hardener. Hope it helps
@brandonhunsaker6867
4 жыл бұрын
How do you clean the gun
@UPOLRaptor
4 жыл бұрын
Hi Brandon, you need to clean your gun in-between mixes. All equipment should be thoroughly washed with acetone immediately after use. Hope it helps
@IFHSP2
5 жыл бұрын
Does the tint and hardener fit in the bottle now. Before it would spill over when you put the gun in the bottle.
@UPOLRaptor
5 жыл бұрын
Hi Flex, yes! If you have the new kits, the hardener and tint will fit in there :)
@davepelfrey3958
4 жыл бұрын
Which is considered to be better 1K or 2K?
@UPOLRaptor
4 жыл бұрын
Hi Dave, 1K means there is no hardener. So 2K is tougher. Hope it helps
@davepelfrey3958
4 жыл бұрын
@@UPOLRaptor absolutely, I've been watching alot of these guys applying Raptor to vehicles. I have a 1997 C1500 long bed, getting ready as soon as weather permits to apply on my truck. I'm looking forward to it. Raptor is my best choice. Looks and sounds like a proven product. Thank you for quick response.
@davepelfrey3958
4 жыл бұрын
@John Nelson is this a do it yourself kit or someone else have to apply it?
@davepelfrey3958
4 жыл бұрын
@John Nelson that is one helluva video. LoL watermelons being ran over and eggs being hit with a baseball bat. That's entertainment.
@cheeko80
3 жыл бұрын
I want to do my chassis in Raptor , after its been cleaned and rust convertor has been used Should i coat it with the etch primer first?
Пікірлер: 39