I like that you left in the error. You handled that with a lot of class. Respect brother
@cristianalbertozuniga7564
2 жыл бұрын
Hi Chris. I like your videos, not only because how instructive they are, but because you added up good amount of humor. Keep up the good work! Thanks.
@valveman12
3 жыл бұрын
I like that you left in the mistakes. I make mistakes all the time and it is actually a great learning experience if you allow yourself to learn from it..
@jimflood1590
3 жыл бұрын
I thought this was very cool--I'm a subscriber for the Ubiquiti info mostly and just got my first Pi at Christmas so this was timely. I like seeing the "whoops" because it highlights how the little things can derail even the more seasoned folks. I'm glad you kept it in--nice to see you're secure enough in yourself to show the learning moments. I followed the video after watching it through first and I booted from an SSD on the first attempt. Thank you and love the channel.
@mlgreenspan1760
3 жыл бұрын
Nice video and directions - now running my RP-4 on a 128 GB M.2 SSD in an Argon40 case. Thanks for sharing this.
@maartenc6099
3 жыл бұрын
It is nice that you made the mistake so that when I am in this situation I do not have to do it. Liked this video just for this reason.
@JimTaylorJr
3 жыл бұрын
Thanks for sharing the mistakes. It's good to see what it looks like before I make that same mistakes. Lol.
@mariuszengland
3 жыл бұрын
Great video thanks for sharing also a PLUS for showing how easy it is to make mistake and a way to correct it
@jorgepalma551
3 жыл бұрын
if you ask me, videos with mistakes are a lot more valuable than videos that are done perfectly the first time every time. also; micro SD Card read: 44MB/s SSD: 110MB/s M.2 NVME SSD 347MB/s
@Kushari
3 жыл бұрын
Hey Chris. M.2 is a form factor, there’s both SATA and nvme M.2 drives. So saying m.2 drive is incorrect if you’re trying to differentiate from an nvme, it’s SATA vs nvme.
@mrfailure93
3 жыл бұрын
❤
@CrosstalkSolutions
3 жыл бұрын
I stand corrected.
@michael.stuartbrown3288
3 жыл бұрын
Thanks for this video, it was very useful and nice to see some-one else using the desktop. I have upgraded 3 * pi4's to SSD and only had one problem; this was with my MarinaDB system. I was already using a USB disk to store my data and when I booted from USB the system fell over with root account locked. The problem was in /etc/fstab, a second USB device name change. I therefore recommend removing any other USD devices during the changeover adding them back after the upgrade. This is easily done by '#' the lines out of /etc/fstab.
@evancjensen
3 жыл бұрын
2:40 - Not to be nitpicky, but M.2 is the form factor and NVMe or SATA is the protocol that is used. M.2 drives come in both NVMe and SATA.
@biskero
3 жыл бұрын
so it's the M.2 SATA that is showing, correct? else the NVMe speed should be much higher if it's even supported (?)
@spr0k3t
3 жыл бұрын
@@biskero Keep in mind, there is also the limitation of the USB3.0. Using NVME over USB3.0 will not give you much benefit over an M.2 Sata SSD if any.
@biskero
3 жыл бұрын
@@spr0k3t that's right. Saw few videos showing ~400/500 Mb/s depending on NVMe
@AI-PhotographyGeek
3 жыл бұрын
Came back again to this video, because I forgot to hit Like!. Thank you!
@pandersen7984
3 жыл бұрын
"Raspbian OS" was retired when they launched the 8GB Raspberry Pi 4 Mobel B in May 2020. The OS is now Raspberry Pi OS - not to be confused with the Raspberry Pi Desktop OS (x86 version).
@Nunya58294
2 жыл бұрын
Raspbian sounded way better. They pulled a Crapple and fucked the name up 🙄
@blaircampbell2997
3 жыл бұрын
Awesome thank you for sharing. I went from 42 MB / sec to 249.63 MB / sec
@FloM03
3 жыл бұрын
So looking at the speeds you got with your "external USB SSD", are you sure you ment SSD for the first external drive? The speeds(especially after seeing, what is possible with the Sata M.2)look more like a HDD and you also link a hard drive in the description. Other than that, thanks for the great explanatory video
@abhishekkamlesh1751
3 жыл бұрын
The most informed and easy video on ssd booting of raspberry pi....but one question...will the pi take those extra 20 seconds to detect micro sd card every time it boots upm???
@gtludwig
3 жыл бұрын
Thanks for the detailed video, Chris! I got the same case - I fell in love with the m.2 sata ssd solution. Your video helped a lot!
@leodaking
3 жыл бұрын
I'm going to head to your blog and try this out. Just received my first pi and the case. Can't wait to install Manjaro 64 bit and see if it can replace my desktop lol
@hasanuguz6868
3 жыл бұрын
Yo . Could you run manjaro on ssd ?
@neonvoid666
3 жыл бұрын
Looks like (from the performance and Amazon link both) the Seagate 2TB drive is a regular HDD, not an SSD, which would explain the speed difference. An external SSD would be much faster than the 108MB/sec- but that performance is in line with a 2TB HDD. If it was your standard non-NVME external SSD it would have been virtually the same performance as the M.2 SATA SSD, as they both would be SATA, just in different form factors.
@jakecohen325
2 жыл бұрын
Wil this work on a Raspberry Pi 3? Great videos, thanks!
@jan-agedeboer
3 жыл бұрын
Great video and inspiration Chris 👍 jumped the gun couple of weeks ago to integrate home assistant with a RPi4 4gb. Coming from a b+ (that's not the 2b 😉) it's a great little beast to use docker on.
@terotahvo6849
3 жыл бұрын
Regular SSD and M.2 SSD (not nvme) use the same protocol SATA3 (MAX about 600MB) so speed difference between ssd and m.2 here is because the disks not because the interface (SSD vs. M.2 SSD), isn't it?
@One-Eyed-Willly
3 жыл бұрын
Thanks for the video. I got my Pi preped for when I get my SSD. I am guessing when all done you should expand your file system so you can use all of the drive.
@sleepingcattv
3 жыл бұрын
Either I'm totally blind or the affiliate-link for the argon case is missing. Please add, I'd love to put your link on my Christmas wish-list :P
@timrobertson8242
3 жыл бұрын
The Argon Link is in the referenced BLOG -- unlike the other hardware, Amazon does not yet appear to have it available. It's present on the Manufacturer's Website (as well as the bottom only, if you already have the top case) www.argon40.com/argon-one-m-2-case-for-raspberry-pi-4.html -- Enjoy!
@tw3145wallenstein
3 жыл бұрын
@@timrobertson8242 I have ordered 2 a couple weeks ago and they are still in Hong Kong according to the tracking so shipping from argon is not the fastest thing ever, just something to keep in mind
@sleepingcattv
3 жыл бұрын
@@timrobertson8242 Oh, they are already on German amazon so I just assumed they had it in the US too... Thanks!
@spr0k3t
3 жыл бұрын
Not an affiliate link, but they are available on teh Azamons: www.amazon.com/gp/product/B08MJ3CSW7 . I got a couple of these a few months back and love em.
@tw3145wallenstein
3 жыл бұрын
@@spr0k3t ohh well i wish i would have seen this before I ordered from their site. i am still waiting on them....
@flush_me
3 жыл бұрын
The whole install to Micro SD card first is an unnecessary step. Just connect the USB3 drive to the computer you are flashing the OS image from. It will show up under 'Choose SD Card' in Raspberry Pi Imager and just write directly to the USB drive.
@chrislee1701
3 жыл бұрын
Glad I wasn't the only one thinking the SD card wasn't needed.
@mannhansen9337
3 жыл бұрын
I did the same as you and it worked like a charm. No need to go via the SD card first.
@dude8869
3 жыл бұрын
@@mannhansen9337 How did you get the RPi to ignore the SD card boot? New RPi4 stops when it can't find a card.
@mannhansen9337
3 жыл бұрын
@@dude8869 I removed the SD card and boot from USB directly. Remember to upgrade RPi EEPROM , better support for USB boot. Now I have 5 RPi 4, 4 of them booting from Sandisk 64 Gb and 1 on Segate 1 TB harddisk in metal casing with USB 3. Only Sandisk work properly, avoid Kingston USB sticks, they have boot problems.Also managed to boot from Voyager 128Gb, only one tested so far.OK and fast.
@modeltech9025
3 жыл бұрын
Thank you for the video, More Power sir..
@DoryanTheCritic
3 жыл бұрын
Why does this method not require the command "sudo rpi-eeprom-update -d -a"? Is it because the latest bootloader incorporates that upgrade already? Liked and subscribed to the channel. Thanks.
@simone33792
Жыл бұрын
Your videos are awesome …. I want to ask a question: I have a raspian os 32b version with pihole in, can I copy all with sd copier on an ssd M.2 key-B, and it work then?
@philipprudhomme6967
3 жыл бұрын
Thank you, an extremely helpful video.
@kejung1
3 жыл бұрын
Great video, good information! Thanks 🙏
@EverydayLinuxUser
3 жыл бұрын
Excellent guide. Thank you
10 ай бұрын
Hello thank you so much for the video. Would you also be so kind to explain or even better, create a video explaining, how we can use an SSD with ext4 (or NTFS) file format to boot and install OS on? As far as I know the imager currently converts the main boot partition to FAT32. I also notice that the SD CARD COPIER also doesn't give any option for file format. Is there a way to flash OS drives with in Raspberry Pi OS with and option to select file format? I really would like to set my "first" pi on an SSD which is using ext4 (or NTFS or at least ExFat at the very least). I would like to install the OS on an ext4 drive and boot from it for the most resilient setup, before I even delve into the Pi world wormhole. And perhaps you can also do a video of benchmarking FAT32 vs Ext4 etc? Would really appreciate any comment, help or guidance from you.
@chrisumali9841
3 жыл бұрын
Thanks for the demo and info, bye bye Grammy Pictures! Have a great day
@serviceprovider6956
3 жыл бұрын
thanks Chris
@alyagoot94
3 жыл бұрын
thank you very much
@sagusoftware
Жыл бұрын
Excellent. On my desktop, I don't have the "SYSTEM TOOLS". How can configure this?
@timfavreau631
3 жыл бұрын
Thanks for sharing!
@b00m3rh4nd_sol
3 жыл бұрын
okay... booting from USB is cool... how about network boot? running multiple OS' from netboot? :D
@BlownMacTruck
3 жыл бұрын
Raspberry pis have supported netboot for a long time. Add a power over ethernet hat and you don’t even need a wall wart. Changing what OS is netbooted is literally changing a symlink or renaming a directory on your netboot box. It’s faster than swapping and cards or usb drives.
@peterloader974
3 жыл бұрын
All I did was update the Raspberry PI Software and use the SD Card Copier to copy the system to the M.2 SSD drive and change the boot loading options in the raspi-config file. Then shut down and removed the SD Card and re-started the PI again. It booted directly from the M.2 SSD then.
@fodorlevente7820
Жыл бұрын
Thanks!
@geo5162
3 жыл бұрын
If your not using raspberry pi os and want to easily write an image to the ssd just plug the sdd into your desktop and write the image from there. make sure to setup boot from usb
@ltcreview7443
Жыл бұрын
Hello. I got to start by saying Thank You! for such an amazing video. I was able to follow through every step of the way, but at the end when removing the SD Card and just booting off the SSD. I get this message. mmc1: controller never released inhibit bit(s) Any suggestions? Thank you in advance for any assistance.
@Taylexwow
3 жыл бұрын
So does it look for the microSD every time? If its gonna take 20 seconds to time out every boot that seems like a downgrade......or is the intent for faster app loading and general hd use?
@rogerjones9984
3 жыл бұрын
I don't follow how that would be considered a downgrade. Don't forget, it's not just faster boot time, the whole OS will be more responsive when running, because any disk access is at the speed of the USB-attached SSD/M.2. So even if there was a timeout looking for a non-existent SD card, I'd take that for the increase performance when running.
@spr0k3t
3 жыл бұрын
It's 20 or so seconds to boot to the desktop environment... not to find the USB boot. The actual time to move from SDCard to USB bootable is approximately 3 seconds. The SDCard will take priority over USB if you have a bootable SDCard installed.
@brquackenbush4144
3 жыл бұрын
did you purposefully say "disk"claimer or was that an accident?
@mvl8209
3 жыл бұрын
Where did you buy that HDMI monitor, how much does it cost and can it be run from a powerbank (so I can use it on the train)?
Usb monitors exist for about 5+ years at least, use a tablet though!
@johnganci933
3 жыл бұрын
Just did this with an rPi 8GB using the external M.2 SSD. First boot without SD card failed; got message to insert SD card. Turned out, had to do one final step. Rebooted with SD card, started rasp-config, advanced->bootloader version; select use latest version boot ROM software. After that, reboot without an SD card worked fine.
@jamiegossett
2 жыл бұрын
NVMe drives are M.2 M.2 also come in SATA 3
@RexRegire
2 жыл бұрын
update 08/2022: we can now flash the eeprom from raspi imager directly, (miscelenious -> boot priority -> usb boot), fit the SD card in the raspb, plug a sceen, boot the raspberry, green screen ? you pass the test, plug your already flash SSD (or whatever), and...... done !
@mitch_the_-itch
Жыл бұрын
Where can I buy that shirt? The Pi stuff is cool too ;) M.2 is the form factor. You can get both NVME and SSD in that form factor. Of course I just bought a NVME drive to do this, lol.
@AskIveSolar
3 жыл бұрын
Ooh @ copying the sd card with the copier app. I GOTTA try that. I was just wondering if I can take my SD card that's already set up and running and copy it to a HD for a smooth transition to bigger storage.
@Pzapza
Жыл бұрын
My sd card slot got damaged. Is there a way to use it now? Can I boot from USB without the setup involving the sd card slot?
@adziup
3 жыл бұрын
in order to prepare the drive, do i need to make a clone of microSD card onto a drive, or can i make a new image using raspberry imager and choose the drive? anyway, what is better method? or maybe there are no differences between them?
@MalcumY
3 жыл бұрын
hello, what is the name of the portable monitor? how much does it cost n where to get it please?
@JamesJones-zt2yx
2 жыл бұрын
Did the copy from SD card to the USB drive (gosh, that Argon M.2 case is nice)... but it looks like the copy copied the disk identifier; I had to go into the extra fdisk commands to change that. Output from rpi-eeprom-config shows BOOT_ORDER=0xf14, and since you read from the least significant hex digit up, that means try USB first, then SD, and repeat if both fail.... but rebooting boots from the SD. If I pull the SD and boot, it stops with the message "mmc1 controller never released inhibit bits"" on the screen. Any suggestions?
@richupton
3 жыл бұрын
Also can you do a Raspberry Pi Unifi controller install vid.. Please..!
@ZenAdm1n_
3 жыл бұрын
He did this: kzitem.info/news/bejne/uX-kk2dvqGKYZYI
@skf957
3 жыл бұрын
I can recomend this as a solution having been running the Unifi controller on a 3b (not plus) for over 2 years with zero problems. It's on 24x7 and hasn't missed a beat. I do, though, set the autobackup location to my NAS just in case (when?) the SD card fails.
@JamesHowe
3 жыл бұрын
Nice write-up. Unfortunately I can't seem to get it to work. I have a new Raspberry Pi -4 and I went through the entire process but when I try to reboot without the SD card, the pi just sits on a screen waiting for an SD card to be inserted. Is there anything else I need to do to the Pi to enable it to boot from SSD?
@IbanMieZ
3 жыл бұрын
Looks the same for me... :/ I also did some additional steps with eeprom-update and i still can't manage. I guess I will try it with a USB stick to see if the actual drive/enclosure is to blame.
@IbanMieZ
3 жыл бұрын
After swapping my SanDisk 240GB SSD (running in an ADATA ED600 enclosure) for a Kingston 16GB USB containing a Windows-burned fresh install (+ SSH file added), works like a charm. I'll have to see if the enclosure is to blame, or something else... Maybe it's something to do with TRIM support mentioned by another commenter fellow around here.
@donaldahlskog3519
3 жыл бұрын
I went thru the process several times, the sata drive isn't recognized. I have tried a Kingston and SD neither recognized. I connected it to my mac with a usb/usb cable and is recognized and will format??? They are M.2 2280 sata III drives???
@zachlehnherr6600
2 жыл бұрын
Is there a way to have it boot off the m.2, but leave the SD in as a backup (with pi os still on)
@WR3ND
3 жыл бұрын
Q: That's a slow SSD compared to what I'm used to on my SSDs, which are roughly about 550 MB/S R/W (when not using RAM caching, like Samsung rapid mode). Would the limiting factor be the USB 3 connection at that point? Edit: Using the same CL test as you in Manjaro I'm getting 536 and 524 MB/S on a couple of my SSDs over SATA.
@eltonsantosoficial
3 жыл бұрын
I can't boot my Kali linux (I need amd64 and not arm) from my HD on raspberry 4 via USB.
@DeyvsonMoutinhoCaliman
3 жыл бұрын
The problem is that it's not booting from the SD card, not even once. I wanted to test booting it directly from USB.
@tomslikk2130
3 жыл бұрын
So I'm trying to do this in Oct 2021 and after updates and upgrades I still get the a NO EEPROM Bin File Found error. It's driving me nuts. I haven't found any instructions on how to fix the issue.
@henkenTTV
2 жыл бұрын
I followed this video exactly using a Samsung EVO 980 500G. I was getting the rainbow boot screen when using the 3.1 USB slot but was able to boot from the 2.0 slot. Is there a way to enable this from the 3.1 slot?
@henkenTTV
2 жыл бұрын
Well I moved it back over to the 3.1 cause the 2.0 started failing and it now works. better.
@PhonetoysTv
3 жыл бұрын
hi sir, can u try to boot also in opi one? thanks
@davidv7403
3 жыл бұрын
Unifi launched a wifi 6 ap lite today. Are you going to review it?
@tambzkie
3 жыл бұрын
home you can tutor us also how to boot on ssd in orange pi pc. thanks
@kuljitghuman8077
3 жыл бұрын
Can we use raspbian lite for ssd . Any extra steps for booting from ssd ?
@BushWhacker069
3 жыл бұрын
Will this work on a RASP 3B+ using newest image? I get the new Order of items in the Config program but the usb Items (5 & 6) do not appear. The new drive is recognised under Gparted as unpartitioned
@BrianThomas
3 жыл бұрын
How would you set this up in a YAML playbook? I'd like to do this on 8 Pi's
@ridinrick
3 жыл бұрын
Does any know if the Silicon 512gb M.2 will fit in the same SSK enclosure?
@luismarrero9293
3 жыл бұрын
hey great video i have the same error about eeprom bin file not found . i did all the update , upgrade , and full-upgrade , check the eeprom version 2020-10-28 but still not able to go through the raspi-config configuration and when select usb boot same error back about eprom
@raul230285
3 жыл бұрын
Amazing..!!!
@clschnak
3 жыл бұрын
please be more clear on your videos, as those it may seem simple, and followed instructions with my external hd. It is not letting my transfer over the raspbin to my external due to not having a partition. It would be easier for someone to just change their setting to recognize the external on boot and to download the pi file over to the external and then have the pi boot up without the ssd hard in it and have the external plugged in. I have done this a tone, having the same results over and over again, when in short like I said if just saving the pi on the external and then booting up, with the external plugged in and the ssd card out words fine.
@anandvalavalkar3138
3 жыл бұрын
Can you do a video on the Unifi Switch Aggregation?
@send2gl
3 жыл бұрын
Appreciate the m.2 drives are even faster than ssd but as both go via a USB3 how come the former is so much faster? In a conventional computer connection would be via a motherboard bus. Know USB3 is fast but didnt think it could handle SSDs at full speed.
@tomferrin1148
3 жыл бұрын
What SATA to USB 3.0 adapter you use makes all the difference in the world. Lots of info on the internet about this.
@DevRaj-te1kh
2 жыл бұрын
Can't I boot it directly from USB ? I don't have a SD card
@fabio2134
3 жыл бұрын
bought Raspberry Pi 4 and or bought m.2 from 256gb and case for m.2 from orico but when the Raspberry starts with m.2 it is not detected you have to unplug it from the USB port and reattach it solution
@jordanmilne634
3 жыл бұрын
Does the Argon case work with M.2 and PoE at the same time?
@spr0k3t
3 жыл бұрын
No it won't. I have the ArgonOne case and there is a heat sink and fan inside the case that keeps the POE hat (or pretty much all other hats) from fitting in the case. Perhaps the next revision of the ArgonOne could provide something like that.
@aroubin
3 жыл бұрын
Get PoE splitter from Amazon for $14 but yeah no PoE hat will fit this case.
@CaptainRedbeardfullon
3 жыл бұрын
i have done this recently with raspberry OS 32bit and in raspi-config i have no boot options. and no not under advance settings either
@donaldahlskog3519
3 жыл бұрын
I have done the install in video several times and the ssd isn"t recognized unless I remove bridge and re-install. Then the ssd boots fine. I am using Jan distro. What am I doing wrong???
@omersucuoglu8469
3 жыл бұрын
is it possible to boot a non-pi os drive? i want to run lineage os from a USB hdd.
@evehp4161
3 жыл бұрын
I get a "mmc1: Controller never released inhibit bit(s)" and a series of errors after that on the boot screen when starting up from the created SSD drive using Raspberry Pi 400 SAMSUNG 870 EVO 500GB 2.5 Inch SATA III Internal SSD (MZ-77E500B/AM) Sabrent USB 3.0 to SSD / 2.5-Inch SATA I/II/III Hard Drive Adapter (EC-SSHD) Any idea why this happens and what to do about it?
@DoryanTheCritic
3 жыл бұрын
Is the "blog post" the "Written instructions: crosstalksolutions.com/raspbe..."?
@haruhitakato
3 жыл бұрын
Time 15:08 BEST PART :D
@costacosta108
3 жыл бұрын
Hello, if i would liké return boot from sd card , how make it
@hotmonitor
3 жыл бұрын
When clone SD card to SSD have error "drivers changed copy aborted" . Cancel when create 2 partition. SSD is ok unalocated Firmware is from 6 july 2021. eeprom is update, How to fix this?
@halloschmitty
3 жыл бұрын
since "Buster" everything can be booted from USB / SSD
@SondeEscanilla25
Жыл бұрын
Nice
@Manuel.Torres1
3 жыл бұрын
After hitting enter on usb boot. I get an error message "No EEPROM bin file found for version 2021-02-16 - aborting." How can I fix this? Thank you
@ock538
3 жыл бұрын
Just ordered first pi
@ock538
3 жыл бұрын
@Scott Luthershame i had no clue pi exsisted. I want a 0 now. Im hooked without 1 yet. this thing is frkin cool. Going to have too put on thinking cap to learn this stuff
@mohitsoni5230
3 жыл бұрын
The biggest problem you were gonna face is how to place pi in a pi case😂 Believe me😂 In my first time.. I was too scared of that I might damage my pi. But everything went well 😂
@exuviumisopods
3 жыл бұрын
By accident the time machine sent you to the middle ages, your phone rings and you answer it in front of a witch trial: - Hi Mike, actually you need a USB 3.0 or a flash-drive, but a micro-SD card is more reliable. I would recommend an external 2TB SSD or an M.2 SSD. They don't work with NVMEs you need an actual M.2 SSD drive. .................... [that was the crowd just listened to you] - [the judge yelling with raised arms] The witch jumped to that man, catch him and burn him!
@viren.carriethakur1359
3 жыл бұрын
Now The respberry pi latest version come with inbuild support for usb or sdcard hust copy the image to usb drive and enable the usb boot through config-respi. Its done . Thanks for tutorial anyway.
@e1woqf
3 жыл бұрын
Once USB boot is enabled, does that mean I'll always have to wait about 20 seconds for the "no sd card found" timeout to complete or is there a way to get the Pi to boot from USB immediately?
@spr0k3t
3 жыл бұрын
It's not 20 seconds really. It's more along the lines of 3 seconds for the boot eeprom to check/redirect is all. I beleive he was saying 20 seconds to boot into the desktop environment.
@e1woqf
3 жыл бұрын
@@spr0k3t Meanwhile my Pi 4 together with an Argon One M.2 case and a M.2 SSD have arrived. Of course I've spent some time on it this weekend. 😀 You're right, indeed. It takes about 20 seconds to boot into the desktop environment. Works like a charm!
@tomferrin1148
3 жыл бұрын
You can set the order of what devices to boot from using command line tool raspi-eeprom-config and changing the BOOT_ORDER parameter from 0xf41 to 0xf14. Then the boot code will try to boot from USB first and only try the SD card if that fails.
@nirmalaskitchentamil9471
3 жыл бұрын
Nice...
@christinehabib3236
3 жыл бұрын
Does it come with raspi OS?
@ronniejamesdio6350
3 жыл бұрын
TRIM support may not work over usb.
@doomerno.1744
2 жыл бұрын
Can I boot it from usb 3.1?
@quinnhenry6719
3 жыл бұрын
15:10 Let me tell you... I got a great laugh out of this!
@infotruther
2 жыл бұрын
Why did you skip the location setting? Isn't that important to?
@mattivirta
2 жыл бұрын
aqlltime come after unalloicated partition gparted ok but sd card copier say ewerytime could not mount partition. same this doing ewery usb memory or sd card. and not show 256gb usb stick or 128gb stick not can format and use.
Пікірлер: 195