Thanks. Helped me a lot. Only issue I had was using a USB power supply with not enough output voltage. Changed the USB power supply and all was good.
@msuleman2001
4 жыл бұрын
normally usb provides 3.5 to 5 volts which are enough to run small machines but if you attached some mechanical devices with, then you provide external power source such as battery bank
@h2Okka
3 жыл бұрын
Mine wouldn't turn on no matter what I do
@gwrydd
8 ай бұрын
@@h2Okka what was the issue
@04aleyna24
5 жыл бұрын
George, you've explained fantastically.. Very helpful video, I'm extremely pleased with that. Hope you are doing OK in Germany.. I guess we Brits are all same, wherever we live we always set the location as UK, I do same :)))
@technicalgeeks6061
3 жыл бұрын
Thanks Bro , it was very helpful for our practical sessions. All PCCOE students like this
@CaptainRohan400
3 жыл бұрын
is MCQ link shared ?
@amitkhirdekar
3 жыл бұрын
@@CaptainRohan400 Not Yet😀
@kartiksangaonkar1295
3 жыл бұрын
But why do we need to watch twice??
@dsmith3625
3 жыл бұрын
George..i know you put this video out long ago, but it is the best beginner tutorial...because of you my pi 3b+ and 7inch tft are working. Awesome. Thank you
@TitaniumNitro
2 ай бұрын
Now this comment is from long ago too :)
@hudatolah
5 жыл бұрын
Finally an actually useful video. No other videos have mentioned how to get the operating system into the RPi. I ordered it on Amazon based on a recommendation from a friend. Did not even know there is a website at the time. This video made it all clear! Danke shoen!
@ElekrisLP
4 жыл бұрын
I'm actually retarded. I didn't knew it had a microSD slot on the other side so I spent the whole evening trying to figure out why it's not reading the SD card from USB.
@57_a_sarthak22
4 жыл бұрын
😂😂😂
@piggilinen
4 жыл бұрын
Same 😂😂😂
@mees-op6sl
4 жыл бұрын
f
@dh00mketu
4 жыл бұрын
The noble prize goes to you buddy.
@arimukh28
4 жыл бұрын
F
@ahamilton6915
5 жыл бұрын
I got one for christmas today
@lilmckev7179
5 жыл бұрын
Avalon blessed you manage to get it set up. Download kodi on it too sick for films and tv shows
@erehh9817
5 жыл бұрын
Avalon blessed my parents said it’s a waste of money ;(
@steveplays6143
5 жыл бұрын
Avalon blessed idiot
@pepijntrampe918
5 жыл бұрын
@@erehh9817 they stupid no offence but they dont know what you can do whit it
@manueltaveras3546
5 жыл бұрын
Looking for somebody that no Linux and a Raspberry Pi to work on a special project
@ralphcrenshaw6491
3 жыл бұрын
Great explanation, just a note that you must format the disk before copying the files to it and make sure they are in the primary directory, not a sub-directory. The Pi needs to see them upon start up.
@sravanjosh1218
2 жыл бұрын
Thanks Ralph
@Cxct0
10 ай бұрын
how do i do that
@Jbziscool1
10 ай бұрын
@@Cxct0 on your pc when the sd card is plugged in open file explorer and go onto "this pc" you should see another drive you wanna right click it, click format and then click start. Formatting erases everything from the drive btw so make sure you do it to the right one lol
@Cxct0
10 ай бұрын
@@Jbziscool1 i did it and it works thanks
@supermotoskippy5914
4 жыл бұрын
Thanks this really helped I’m changing my cars centre clock for a custom pi and 7” screen set up, so this really helped me understand how to use it
@berniemackattack86
27 күн бұрын
What kinda car do you have or did you do this on sounds interesting..
@supermotoskippy5914
27 күн бұрын
@@berniemackattack86 hi mate it was on a Opel vectra C 2007 model I also did the same to a Opel Astra 2009 and a Renault van
@berniemackattack86
26 күн бұрын
@@supermotoskippy5914 Opel Germany ?? And did you do any videos of it I'd love to see what that looked like
@stumpmonkey7068
4 жыл бұрын
Good show mate. I'm making one for my father for his birthday, and this really gets the ball rolling.
@muhammadrouhan6121
4 ай бұрын
Watching this because I have a rasberry pi project this semester for my operating systems course. Hopefully it goes well!
@djarcforceable
4 жыл бұрын
Read up on the Raspberry Pi and have been intrigued by the project for a while. Recently I decided I needed to get separate hardware for my office and web browsing tasks so I could free up my rather expensive PC gaming rig to do nothing but game. At first I thought about just buying a cheap used Dell office PC but then I remembered the Raspberry Pi and I realized this was a perfect use for it... has all the features I could want for browsing and office tasks and it doesn't take up desk space like a typical PC does. Ordered a nice complete desktop kit with the Pi 4B - 4gb ram version and it came in the other day. Only issue is this... I've never used a Pi and have minimal experience tinkering with Linux based systems. Was cool to find your video on setting up a Pi. Much more simple than I expected it to be. Thanks for the great and helpful video!
@MakeUseOf
4 жыл бұрын
Even for simple web browsing tasks, the Pi is woefully underpowered. I'd recommend CloudReady / Chrome OS running on any old laptop/throwaway desktop. Absolutely flies.
@auxpower13
5 жыл бұрын
Thank you very much for making the video. It was informative and made excellent use of the fact that it is a video and you captured all the relevant information on the screen of the device nicely. Kudos and cheers! I'll be back for more!
@sethusuresh9196
4 жыл бұрын
Thi is the Best video on Rpi set up. I followed this tutorial for my Rpi 4 setup and worked like a charm. I'd tried several other tutorials including headless setup but never really succeeded. This tutorial was very very helpful. Thank you
@zezeandjr4110
2 жыл бұрын
This was a simple, straightforward instructional video, fantastic.
@fatihozoglu7835
3 жыл бұрын
It's 2021 and still helpful . Thanks !
@OggieDoggie
3 жыл бұрын
old video but still very relevant if your new to the Raspberry Pi 3 or 4
@randyguay7115
7 ай бұрын
Hay iwas simply curious, now this video has convinced me to give it a go. Good video thanks. Look forward to more soon
@TitaniumNitro
2 ай бұрын
Thanks, now I can unleash my pure creativity by piecing together a laptop!
@williamwiese9963
2 жыл бұрын
This is perfect! Great video in getting started. I see a few guys using this for ham radios in the field. So many neat options for this little device. Thank you Prost!
@erosofficial3472
2 жыл бұрын
how do you go in noobs download i cant see it
@reazn.999
2 жыл бұрын
@@erosofficial3472 yeah same
@JeffReams
5 жыл бұрын
Very helpful and straight to the point tutorial. 👍
@nigelvalentine3389
5 жыл бұрын
Thank you so much for your walk through video, until we found you we were struggling. It was so simple and your instructions were extremely clear and helpful. We are now up and running all thanks to you.
@altheamermerosie6135
5 жыл бұрын
Hi there. Can you help me ? When I plugged in all the wires, it doesn't reboot on my laptop. What should I do 😭
@Ivonnejp2009
5 жыл бұрын
Best video i found. Very helpful, to the point, very easy to follow all the instructions! Thank you for making this video
@MrNigel1340
6 жыл бұрын
Thank you for a clear and very informative video.
@Us3r0ffline.
3 жыл бұрын
Got one for my birthday today.
@025-avineshj7
2 жыл бұрын
this video really helped my needs thank you!
@michaelvanscoyk746
Жыл бұрын
Thanks for getting straight to the point, very easy to follow
@bigdimus69
5 жыл бұрын
quick no nonsense and to the point thanks for the info
@mirzamudassir
5 жыл бұрын
no nonsense
@bigdimus69
5 жыл бұрын
@@mirzamudassir Thanks men, English is my third language and something get messy
@srinivasancheenu1908
4 жыл бұрын
thanks for sharing your knowledge...this has helped me to take my project to the next level...
@MakeUseOf
4 жыл бұрын
Glad I could help!
@dk_gaming404
4 жыл бұрын
Hi nahi hota to get
5 жыл бұрын
Thank you for the video. It is great to know how to use my PI once I get it.
@Geert0413
4 жыл бұрын
Way better than the 18min during video's. to the point. helped me a lot! allthough i had to watch it before i bought a new power supply, Afterwards it makes sense that a Pi is not gonna startup with no files on the SD card at all lol.
@fritzguye
4 жыл бұрын
Thanks for making this. Quick and simple. Mines older we'll see if it has wifi built in
@mrabc942
5 жыл бұрын
This was the best video ever
@danielhunter34
3 жыл бұрын
Thank you very much for this very informative video, when it arrives tomorrow I know what I’m doing now but then comes the challenge of trying to put Hyperion on it but il worry about that another times
@badgel_blu0127
5 жыл бұрын
Finally someone who explains it simple other people be saying a lot of useless things
@gloodgy2774
Жыл бұрын
I bought a 3d printer second hand, and they Frankensteined a raspberry pi onto it, very clever of them
@MrsAliceDias27
4 жыл бұрын
Great video!!! Just heard about it and loved your explanation. Thank you from Brazil!
@aishwarygupta3729
3 жыл бұрын
OMG!!!! SO PERFECT EXPLANATION !!! THANKS GEORGE!!
@rg3915
4 жыл бұрын
Good Job w/in depth steps.. U da Man !!
@FuckingFlowie
5 жыл бұрын
Great video, thank you for uploading.
@user-nd5vp4bm5t
3 жыл бұрын
Yes
@surod10
4 жыл бұрын
finaly actualy somthing that tells me how to download i already have the raspberry PI for a year! and never did anything BUT finaly!
@gamingtv_goofball
4 жыл бұрын
Thank you so much!!!! I loved this tutorial!
@MoondyneJoe
6 жыл бұрын
Very well explained, thanks for the info (:
@sammuelwells1398
5 жыл бұрын
This was SUPER helpful! Thanks so much!
@sidver2578
3 жыл бұрын
Now i feel safe buying a raspberry pi
@MADMATTRS
3 жыл бұрын
thanks bro this is so helpful
@akinfenwadavid6873
4 жыл бұрын
Wow. Such a great tutorial.
@sarasein
5 жыл бұрын
Sir, mine did not shows any signal or video on my TVs. I tried two TVs and swap with other two different SD cards but failed to work. Please help.
@rodneystephenson7693
5 жыл бұрын
That is because Raspberry or these KZitem people will not tell you that you have to format the SD card in a format that Windows will not provide. You have to download a scary 3rd party software in order to get FAT32 format on a 64+ GB card. THIS pisses me off so much I am returning the Pi and refusing to ever use it. That is really crappy on their end to require something that is not standard.
@Digikidthevoiceofreason
5 жыл бұрын
Rodney Stephenson incorrect.
@lilmckev7179
5 жыл бұрын
Rodney Stephenson init stop chatting so much wetness it’s work for me you doylem
@xkallubar
5 жыл бұрын
Did you even have power supply that's charged and plugged into it? If no then thats the problem...
Very useful we have a raspberry pie at home so it’s just really nice
@bitterscreech7275
4 жыл бұрын
Great job! Your advice and the raspberry pis instructions completely screwed over my SD card NOT A HATE COMMENT! This is a great video on how to set it up, the Raspberry pi website mainly messed up my card
@MakeUseOf
4 жыл бұрын
You can always reformat and try again...
@arundevmb5183
5 жыл бұрын
I am trying to make a 3d printer with raspberry pi .but I'm not that much familiar with pi can you help me to programming
@artsandeducation7716
4 жыл бұрын
Very expensive lesson .....thanks you sir .........
@Homelander-js9hd
5 жыл бұрын
Thanks for a GREAT tutorial!
@DynamicSeq
3 жыл бұрын
Thanks. Made my day..
@viva7642
5 жыл бұрын
What is the file system on the SDCARD? NTFS or FAT?
@Jhereckk
3 жыл бұрын
I dont have one of these, im just trying to understand how they work for when I will use them to program my AI friend Kendra into the robot so she can move and think
@majinxtrunks6236
3 жыл бұрын
L
@uraniumbeaver
4 жыл бұрын
Thank you! This is very helpful!
@coolvlogs4467
3 жыл бұрын
I ordered raspberry pi today
@JonasVetsch
3 жыл бұрын
Thanks. Great video!
@eishaakanskha9728
5 жыл бұрын
Very nice video, to the point, thanks
@xHallOfFamex
2 жыл бұрын
Thanks, helped a lot!
@sommmathechamp5801
5 жыл бұрын
Omgosh this was a big help. I thought it was just like another run-o-the mill Microcontroller. Thx 👍
@rathanbolar2308
3 жыл бұрын
Thanks! this helped a lot
@gadkalu52
2 жыл бұрын
Thanks for the video
@victoriabooker6212
3 жыл бұрын
Love the snoopy is it a Tom ever hart print?
@MrPeteBeale
4 жыл бұрын
Excellent tutorial thanks.
@noahdiez9400
3 ай бұрын
Are you not worry about static electricity hurting the components?
@sabrinajohnson5897
4 жыл бұрын
Awesome. Thanks a mil
@darkghostrider2014
3 жыл бұрын
Thank you it was very helpful. Can we use raspberry pi for our tv
@Graham1904
4 жыл бұрын
Great video for use Noobies. I thought you need to create an image on the SD card using Etcher or something like that. Didn't realise that you can copy normally.
@MakeUseOf
4 жыл бұрын
Note thats only for this noobs tool though - normally, you do need to use an ISO burning tool like Etcher
@judanetwork
4 жыл бұрын
Hi, what type screws you use to mount the card to the case?
@susic1819
2 жыл бұрын
I'm gonna put up a Discord bot or something with one of these. Good tutorial
@muzhiwaay
4 жыл бұрын
I have 2 and I can't get this working with either of them, I've tried different things from other videos and still nothing, could it be a problem with the raspberry pi
@dennisquintero6380
5 жыл бұрын
Thank you very much, it was straight to the point without all the jargon that goes with it. I am trying to make mine into a gps device, can you help?
@demonprincess5634
5 жыл бұрын
i just click on your video, because I got a pi and i have no video what to do next
@xkallubar
5 жыл бұрын
Be sure you have a Raspberry Pi 3 if you have a lower version then look for another video.
@altheamermerosie6135
5 жыл бұрын
Thanks
@nikhilgjog
Жыл бұрын
is there any way to block youtube ads and small videos that youtube plays which can be skipped after 5 seconds?
@ivettemartinez2212
3 жыл бұрын
Great work!!!!!!!!! Thanks
@miragexl007
4 жыл бұрын
Okay, not real computer savvy. Got a Raspberry for an arcade.. All set to go with an SD card with all games. the connector for the power was broken off. Can I get a replacement Raspberry Pi, and just plug in the MicroSD for all the games.. Or do I have to download software into that Raspberry Pi to run love games on the SD card?. Like I said, not real up some things on computers
@makespace8483
3 жыл бұрын
Excellent job!
@namelessghoul3977
4 жыл бұрын
What kind of format should be done on the card?
@marcwampfler2203
5 жыл бұрын
Short and usefull, thanks
@tactiletech1111
4 жыл бұрын
awesome guide man
@n50five
3 жыл бұрын
You're awesome. Thank you
@tomnaughten2799
3 жыл бұрын
So helpful thanks
@tomhughes08
3 жыл бұрын
Wow great video. I really thought you needed to be a programmer to setup a PI device lol.
@kaipark1649
4 жыл бұрын
Thanks so much!
@ashishdhruv
4 жыл бұрын
I have followed all the steps properly but when i connect the rasberry pi, i dont see anything appearing on my screen.Could someone please help me .
@gamecheaterz
5 жыл бұрын
Great video thanks
@Hhhhhbhhhh
5 жыл бұрын
im 14 and I want to build my first thing close to a pc
@r0ckskip
5 жыл бұрын
This is a great place to start! PC's are not difficult to setup either so i'd advise to start saving towards components! A budget CPU and GPU will be a good start.
@WeirdTeen
4 жыл бұрын
no one cares about ur age
@xkallubar
5 жыл бұрын
I got my raspberry pi for christmas and it already had an operating system on it, and it came with power supply, a screen, and a speaker, with a mouse...
@thenightreaper8533
5 жыл бұрын
use it for emulation i guess
@chandu806021
5 жыл бұрын
very useful video...awesome..
@dirtydarrell4748
3 жыл бұрын
Thank You!
@j0hnf_uk
3 жыл бұрын
Just bought a, 'kit', which includes a Raspberry Pi 4, case, power supply and HDMI cable. The one thing I neglected to get was a micro SD card! 🤦♂️🙄 Which means I'll have to be a little more patient before I can actually do anything with it. DOH!!!
@abdelhakimlamnaouar9527
Жыл бұрын
who is the best ,install noobs or raspbian?
@danrogers5921
5 жыл бұрын
Will this work with the 3.5 inch touch screen? Or do I have to use a monitor?
@johnthezemiak
4 жыл бұрын
Raspberry Pi also works with touchscreens. I watched few videos about them.
@theviolist18
5 жыл бұрын
Really excellent video! Thank you! I would like to learn more about it. Do you have any videos on how to set up a weather station? Thanks!
@Anonymous-wb6yj
3 ай бұрын
I would like to install raspberry pi os onto my model 3 b using usb to boot is it possible?
@SimasMc
3 жыл бұрын
How do i get my wireless usb dongle mouse to work??? Or keyboard.
Пікірлер: 481