as a beginner i am very happy that in nearly every video you include explaining the interface type and how it operates...along with then showing how to use the items and some rudimentary code to utilize it...Thanks for the lessons!!
@intelgen7860
3 жыл бұрын
Excellent lesson! I love the thumb stick x and y idea and tutorial. Keep up this awesome level of quality and you will get many more subscribers. Awesome stuff!!
@erikringwalters
2 жыл бұрын
I was having a hard time getting started until I found this video. Great job and thanks!
@Keeping_IT_Simple
3 жыл бұрын
As usual an excellent demo & explanation - keep up the good work!
@LowLevelLearning
3 жыл бұрын
Great video! Grats on almost 1k!
@mariaviklund4546
Жыл бұрын
Your explaining was as good as your soldering was bad. And you really explained everything very well! ;) Thanks!
@johnweller5491
3 жыл бұрын
An excellent video on something I have wanted to try - well done!
@robc3536
3 жыл бұрын
It really is amazing just how little cost, wiring and code it takes for an individual to build something like this! Awesome video, I’m inspired to build something I’m just not sure what!
@tubeDude48
Жыл бұрын
Your link to the SSD1306 is dead!
@RamjetX
3 жыл бұрын
Probably try 'wetting' the iron before touching the part and adding solder.... Solder takes to solder faster than the iron does to solder.
@alevans51
10 ай бұрын
Very helpful. Thanks!
@satyapalsinghrathore6547
3 жыл бұрын
Last one is unique 👌nice❤
@raisagorbachov
2 жыл бұрын
As you say... excellent for debugging. More so if your only Pi is the pico.
@prodBrainShot
26 күн бұрын
Due to buying disposable vapes over the years, I have built a collection of these displays and finally feel like using them for somthing 😂
@unitedrobotics7377
3 жыл бұрын
Nice!!!!
@matthewfelgate
Жыл бұрын
Thanks for sharing this because I just got started using displays with Pico. Do you have a circuit diagram for an SPI display? (Pins are VCC, GND, DIN, CLK, CS, D/C, and RES)
@critical_always
Жыл бұрын
Did anyone else have a giggle when he pulled off the screen protector first immediately after took to soldering the header pins?
@MicrobyteAlan
3 жыл бұрын
Great video thanks
@pranavthakkar8089
3 жыл бұрын
Thank you brother. for saving my time,. please add more tutorial on oled.apis where I can make font size editable. any many more.
@bharath5673__
Жыл бұрын
On pico w it's not working.. Please help
@talk2azs
3 жыл бұрын
How would one use the OLED using C++?
@ednaramor
2 жыл бұрын
Why do I get this error: Traceback (most recent call last): File "", line 8, in IndexError: list index out of range
@noelkuck3391
2 жыл бұрын
Did you get this resolved? Having the same issue.
@rickharold7884
2 жыл бұрын
Fun
@mailtodanish
2 жыл бұрын
Pico takes power in voltage? can we use mobile charger?
@Henry-sv3wv
2 жыл бұрын
if(mobile_charger == usb_charger)printf("true ");
@alexfernandesportrai
2 жыл бұрын
Thanks for the video. I am getting an error. What have I done wrong? Traceback (most recent call last): File "", line 8, in IndexError: list index out of range >>>
@alexfernandesportrai
2 жыл бұрын
Got it working. Super tutorial! Thanks again!
@someghostdude3639
2 жыл бұрын
@@alexfernandesportrai What ended up being the problem? I'm dealing with the same issue, previously saw to recheck solder. Did that, everything looks good solder wise, this is driving me crazy lol.
@Mikesukes
Жыл бұрын
me too what is the fix? getting ready to smash with a hammer.
@johnweller5491
3 жыл бұрын
Is it possible to drive two displays? I've tried modifying your code but no joy. I've added _0 to all of the variables where obvious which still works. I've then duplicated the code changing _0 to _1 but I'm getting dupliacte addresses. Obviously a simple error but I'm not sure where - cabn you help please?
@tinkertechtrove2910
3 жыл бұрын
I have not tried this, I think the address of the screen is fixed but the Pico has two I2C buses so you could try connecting one screen to each, then the address conflict may not matter. Good luck
@vidarhole7204
2 жыл бұрын
@@tinkertechtrove2910 Some displays actually have both I2C and SPI that can make it possible to drive 2 displays. And using a mosfet chip that is set up with I2C bus extender.
@Pigeon_FX
2 жыл бұрын
Just get the error: Traceback (most recent call last): File "", line 8, in IndexError: list index out of range
@jacobholder8188
2 жыл бұрын
I have the same issue
@patrickmattele2013
2 жыл бұрын
@@jacobholder8188 me too
@vidarhole7204
2 жыл бұрын
Same error using the demo.py as code for main program.
@vidarhole7204
2 жыл бұрын
Has anyone found a soloution ?
@jacobholder8188
2 жыл бұрын
@@vidarhole7204 you may have some issues with your electrical connections. I resoldered my connections and it worked. Sorry for a late response
@zuricatex
3 жыл бұрын
can you solder a little worse?
@tinkertechtrove2910
3 жыл бұрын
Probably 😂
@Nickiro0
2 жыл бұрын
no need for the negativity man! i think it was still a pretty cool video and learned something new that im gonna try in my projects!
Пікірлер: 45